- 您现在的位置：买卖IC网 > Datasheet目录227 > GLD150-48G (SL Power Electronics Manufacture of Condor/Ault Brands)PWR SUPPLY MED SWITCH 150W 48V Datasheet资料下载
参数资料
| 型号： | GLD150-48G |
| 厂商： | SL Power Electronics Manufacture of Condor/Ault Brands |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | PWR SUPPLY MED SWITCH 150W 48V |
| 标准包装： | 10 |
| 系列： | GLD150 |
| 类型： | 标准产品 |
| 输出数： | 1 |
| 输出电压： | 48V |
| 输入电压： | 85 ~ 264VAC |
| 输出 - 1 @ 电流（最大）： | 48 VDC @ 3.2A |
| 功率（瓦特）： | 150W |
| 电源类型： | 开关（开放框架） |
| 应用： | 医用型 |
| 安装类型： | 底座安装 |
| 尺寸/尺寸： | 7.00" L x 4.50" W x 1.70" H（177.8mm x 114.3mm x 43.2mm） |
| 效率： | 80% |
| 电源（瓦特）- 最大： | 150W |
| 批准： | CE，CSA，IEC，UL |
| 线路调节： | 2% |
| 负载调整： | 2% |
GLD150 Gold Performance Medical Switchers
150 Watt Multiple Output
PERFORMANCE MEDICAL SWITCHERS
FEATURES:
? Compact 4.5” x 7” x 1.7” size
? Power factor corrected to IEC 1000-3-2 Class A
? Less than 300 μA leakage
? EMI compliance to CISPR11, FCC Class B
? Power fail and remote sense standard
? Medical Approved to UL2601-1, IEC601-1/60601-1
and CSA-C22.2 No. 601.1
? 2 year warranty
? RoHS Compliant Model Available (G suffix)
SPECIFICATIONS
Ac Input
85-264 Vac, 47-63 Hz single phase.
Input Current
2.8 A line current maximum, at 90 Vac, 60 Hz with full rated load, power factor
.99 typical, .96 minimum. Input current harmonic content meets the require-
ments of IEC1000-3-2.
Output Power
150 W with convection cooling, 180 W with fan cooling. Peak ratings are for
60 s maximum duration, 10% duty cycle.
Efficiency
Minimum 80% at full rated load with 230 Vac Input. Approximately 3% less at
115 Vac.
Hold-Up Time
Outputs will remain within regulation limits for 25 ms minimum from loss of
ac input at full load, 10 ms before Power Fail indication.
Output Regulation
Total regulation is the maximum deviation from the nominal voltage for all
steady state loading conditions.
Overload Protection
Fully protected against short circuit and output overload. Short circuit protec-
tion is cycling type power limit.
Minimum Load
No minimum load required to maintain output specifications.
Output Noise
0.5% rms, 1% pk-pk, 20 MHz Bandwidth, differential mode. Measured with
noise probe directly across output terminals of the power supply.
Transient Response
Main Output - 500 μs typical response time for return to within 0.5% of final
value for a 50% load step change, di/dt< 0.2 A μs. Maximum voltage devia-
tion is 3%.
Remote Sense
Standard feature on all models, includes open sense lead protection.
Overvoltage Protection
Built in on all models.
Input Protection
Internal ac fuses provided on both lines on all units.
Voltage Adjustment
Output Voltage is adjustable +/- 5% with user adjustable potentiometer.
Temperature Coefficient
0.03% / °C typical on all outputs.
Overshoot
Less than 2% overshoot at turn-on under all conditions, less than 1% over-
shoot at turn-off under all conditions.
Inhibit
Inhibit signal is pulled to the V1 output common to reduce average output voltage
to less than 5% of nominal.
EMI/EMC Compliance
All models include built-in EMI filtering to meet the EMC requirements of IEC601-1.
Unless otherwise stated, all tests are done at full load and 115 and 230 Vac input.
EMI SPECIFICATIONS COMPLIANCE LEVEL
Conducted Emissions EN55011, Class B; FCC Class B
Static Discharge EN61000-4-2, 6 kV contact 8 kV air
RF Field Susceptibility EN61000-4-3, 3V/meter
Fast Transients/Bursts EN61000-4-4, 2 kV, 5 kHz
Surge Susceptibility EN61000-4-5, 1 kV diff., 2 kV com.
Conducted RF Susceptibility EN61000-4-6, 3V
Voltage Sags & Surges EN61000-4-11
Inrush Current
Inrush 240 Vac is less than 37 A, averaged over the first ac halfcycle under cold
start conditions. Limiting provided by internal thermistors.
Fan Output
An additional 12 Vdc, 250 mA output suitable for powering a dc fan is included in
all models. The fan output is both current limited and thermally protected.
Thermal Shutdown
Provided as a standard feature. Designed to protect unit from prolonged over
temperature.
Power Fail
TTL / CMOS compatible output goes low (<0.5 V) 8 ms before output voltage
drops more than 4% below nominal voltage upon loss of ac power.
Power Good
TTL / CMOS compatible output goes high more than 100 ms after V1 reaches
regulation and should assure that sufficient energy is stored in the input section to
provide normal power fail/shutdown.
Medical Approvals
All models are Certified to be in compliance with the applicable requirements of
UL2601-1, CSA-C22.2 No. 601.1, IEC601-1/60601-1.
Leakage Current
70 μA, 132 Vac @ 60 Hz normal conditions. Single fault conditions, 130 μA, 254 Vac
@ 50 Hz.
Design Verification Documents
The “Gold” series has undergone rigorous review and design analysis. The follow-
ing product documentation is available upon request;
1. MTBF study
2. DVT Data
3. EMC / Susceptibility test results
All specifications are typical at nominal input, full load at 25 O C unless otherwise stated
相关PDF资料 |
PDF描述 |
|---|---|
| GLDA01A1A | SW ROTRY FIX LVR PLAS ROL SPDT |
| GLEA24C | SWITCH TOP ROLLER PLUNGER DPDT |
| GLM110-524 | POWER SUP SWITCHER 110W DUAL MED |
| GLM50D | PWR SPLY MED SWITCHER 50W MULTI |
| GLM65-48 | PWR SPLY MEDICAL 65W 48V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GLD-1T | 制造商:DANAHER - FLUKE 功能描述:1 YR GOLD SUPPORT, ONETOUCH AT 制造商:Fluke Electronics 功能描述:1 YR GOLD SUPPORT, ONETOUCH AT |
| GLD-1T1000 | 制造商:Fluke Networks 功能描述:1 YR Gold Support, OneTouch AT 1000 |
| GLD-1T1500 | 制造商:DANAHER - FLUKE 功能描述:1 YR GOLD SUPPORT, ONETOUCH AT 1500 制造商:Fluke Electronics 功能描述:1 YR GOLD SUPPORT, ONETOUCH AT 1500 |
| GLD-1T2000 | 制造商:Fluke Networks 功能描述:1 YR Gold Support, OneTouch AT 2000 |
| GLD-1T2000MOD | 制造商:Fluke Electronics 功能描述:1 YR GOLD SUPPORT, ONETOUCH AT 2000 MODULE |
发布紧急采购，3分钟左右您将得到回复。