- 您现在的位置：买卖IC网 > Datasheet目录437 > GP1FAV55TK0F (Sharp Microelectronics)XMITTER FIBER OPTIC 50MB/S SHTTR Datasheet资料下载
参数资料
| 型号： | GP1FAV55TK0F |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | XMITTER FIBER OPTIC 50MB/S SHTTR |
| 标准包装： | 200 |
| 波长： | 660nm |
| 数据速率： | 50Mbps |
| 功率 - 输出： | -21 ~ -15dBm |
| 电源电压： | 4.75 V ~ 5.25 V |
| 应用： | 数字音频 |
| 电流 - 电源： | 13mA |
| 其它名称： | 425-2702 |
GP1FAV55TK0F
■ Design and Production Notes
(1) Stabilization of power supply line
Please put a by-pass capacitor (0.1 μ F) close to the device at least within 7 mm of the terminal.
Please also put a 4.7 μ F capacitor across the power supply line nearby.
(2) Soldering condition
Solder at the condition within the absolute maximum ratings in this sheet. In case of using flow soldering, please make
sure of the conditions of process at the flow equipment. Also, do not use reflow soldering. In case of soldering by hand,
do not contact top of soldering iron to lead terminal directly. (Solder at a position more than 1.6 mm away from the base
of the lead terminal.)
(3) About getting dirt and dust in the connector coupling portion
In case dirt or dust comes into the connector coupling portion, please use a blower to take it off.
Any rigid rod-like object must not be inserted since into the coupling portion.
The internal device might be damaged, resulting deteriorated characteristics.
(4) Cleaning
Do not immerse for cleaning. The solvent would get into the connector coupling portion resulting deteriorated
characteristics. Should it be necessary to remove the flux, please use one of the following solvents only to be applied with
a brush.
Solvent : Isopropyl alcohol, Methyl alcohol
(5) Ground during assembling
The human body and the soldering iron must be grounded against the static breakdown of the device during assembling.
Please avoid touching the device terminals as much as possible before assembling.
(6) Assembly of the device
Please fix this device with a screw. In case that this device is not fixed with a screw, stress by detaching connector of
internal elements and leads can adversely affect the device’s reliability. Excessive torque can deform the package and
damage the optics. It can also adversely affect the device’s reliability because the device is used under continuous stress.
Please confirm the limit of fixing torque to the installation before fixing actually.
Recommended values
Screw : M3.0 × 8 mm tapping screw
Fixing torque : 0.7 to 0.8 N·m
Force applied by driver etc. : 39 N or less
Note : Please contact and consult with a Sharp sales representative for any questions about above.
(7) Input signal
This product is designed intentionally based upon the signal transmission which is defined by the digital audio interface
standard ; CP1201. When a signal out of JEITA standard CP-1201 is inputted to this device, there might be a case that this
device can not transmit a signal correctly to receiving unit.
(8) Fixing pin
Since there are other products which has a different fixing pin shape, please make sure to confirm reference mounting
drawing for this device.
(9) Damage to connector coupling portion
Please do not stress the connector coupling portion excessively since there might be a case that the shutter can’t operate
normally.
(10) About getting the flux into connector coupling portion
Please avoid getting a flux into connector coupling portion of this device, because there might be a case that the characteristics
deteriorate the shutter can’t operate normally.
Sheet No.: E2-A00701EN
6
相关PDF资料 |
PDF描述 |
|---|---|
| GP1FM313TZ0F | TRANSMITTER FIBER OPTIC 15.5MBPS |
| GP1FMV31TK0F | TRANSMITTER FIBER OPTIC 15.5MBPS |
| GP1FMV51RK0F | RECEIVER FIBER OPTIC 13.2MBPS |
| GP1FMV51TK0F | TRANSMITTER FIBER OPTIC 13.2MBPS |
| GP1UE271RKVF | RECEIVER IR REM CTRL 3V 38KHZ |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GP1FB200TK | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSMITTERS |
| GP1FB201RK | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC RECEIVERS |
| GP1FC300TP | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSMITTERS |
| GP1FC300TP0F | 功能描述:TRANSMITTER FIBER OPTIC 8MBPS RoHS:是 类别:光电元件 >> 光纤 - 发射器 - 驱动器集成电路 系列:- 标准包装:8 系列:- 波长:- 数据速率:1.6Gbps 功率 - 输出:- 电源电压:3.3V 应用:电信 电流 - 电源:- 其它名称:V23814-U1306IN |
| GP1FD200TK | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSMITTERS |
发布紧急采购，3分钟左右您将得到回复。