- 您现在的位置：买卖IC网 > PDF目录18619 > GP1UM262XK0F (Sharp Microelectronics)RECEIVER REMOTE CTRL TOP 36.7KHZ PDF资料下载
参数资料
| 型号： | GP1UM262XK0F |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | RECEIVER REMOTE CTRL TOP 36.7KHZ |
| 产品目录绘图： | GP Series Front GP Series Side |
| 标准包装： | 1,000 |
| 系列： | * |
| 检测距离： | 10.5m |
| B.P.F. 中心频率： | 36.7kHz |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 1.5mA |
| 方向： | 顶视图 |
| 安装类型： | 通孔 |
| 产品目录页面： | 2866 (CN2011-ZH PDF) |
| 其它名称： | 425-2008 |
GP1UM26XK/27XK/28XK/28YK Series
s Precautions for Operation
1. When this infrared remote control detecting unit shall be adopted for wireless remote control, please use it with the signal format of
transmitter, which total duty ratio D t (Emitting time Σ t N / Transmitting time for 1 block T) is 40% or less. ON signal time T ON
n
N = 1
(Pulse width of the presence of modulated IR) should be 250(200:In case of B.P.F center frequency:56.8kHz model) μ s or more. In
case that the signal format of total duty and ON signal time is out of above conditions, there is a case that reception distance is
much reduced or output is not appeared.
Transmitting time for 1 block:T
T ON
t 1
t 2
t 3
t n
n
D t =( Σ t N / T) × 100 (%)
N = 1
2. Use the light emitting unit (remote control transmitter), in consideration of performance, characteristics, operating conditions of
light emitting device and the characteristics of the light detecting unit.
3. Pay attention to a malfunction of the light detecting unit when the surface is stained with dust and refuse.
Care must be taken not to touch the light detector surface.
If it should be dirty, wipe off such dust and refuse with soft cloth so as to prevent scratch. In case some solvents are required, use
methyl alcohol, ethyl alcohol or isopropyl alcohol only.
Also, protect the light detecting unit against flux and others, since their deposition on the unit inside causes reduction of the
function, fading of markings such as the part number.
4. The shield case should be grounded on PCB pattern.
(The area across the shield case and the GND terminal is internally conductive in some cases and non-conductive in some other
cases.)
5. Do not apply unnecessary force to the terminal and the case.
6. Do not push the light detector surface (photodiode) from outside.
7. To avoid the electrostatic breakdown of IC, handle the unit under the condition of grounding with human body, soldering iron, etc.
8. Do not use hole and groove set in the case of the light detecting unit for other purposes, since they are required to maintain the
specified performance.
9. External Circuit Examples (Mount the outer parts as near the unit as possible).
GND
V CC
V OUT
C O
+
R 1
GND
V e
V O
(Circuit parameters)
R 1 = 47 ?± 5%
C 1 = 47 μ F
In setting R 1 and C 1 , use suitable values after considering under the real condition
The circuit constant is a example. It is difference from mounting equipment. Please select it by your mounting equipment.
This device has a transistor as protection element between V CC and GND to improve anti-static electricity proof.
Please be carefully not to apply exceeding the absolute maximum ratings of applying voltage and continuous high voltage spike
noise because there is cases that transistor will be short by secondary breakdown generally. In order to do difficultly, Please add
CR filter(47 ? (1/10W), 10 μ F or more)such as external circuit example above near V CC .
相关PDF资料 |
PDF描述 |
|---|---|
| 553P3S36 | CBL STR MALE-R/A FEMALE 3POS 3' |
| GP1UM281YKVF | RECEIVER IR REM CTRL 5V 38KHZ |
| 456S6S72 | CABLE R/A FEMALE-FEMALE 6POS 6' |
| GP1UM261XK0F | RECEIVER REMOTE CTRL TOP 38KHZ |
| GP1UM28YK00F | RECEIVER REMOTE CTRL SIDE 40KHZ |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GP1UM267RK | 功能描述:RECEIVER REMOTE CTRL TOP 56.8KHZ RoHS:否 类别:传感器，转换器 >> 光学 - 光电检测器 - 遥控接收器 系列:* 标准包装:250 系列:* |
| GP1UM267RK0F | 功能描述:红外接收机 Rem Cont Rec 5V 56.8 kHz RoHS:否 制造商:Vishay Semiconductors 载频:20 kHz to 60 kHz 传输距离:5 m 显示角:+/- 50 deg 高电平脉冲宽度: 低电平脉冲宽度: 最小高电平输出电压: 输出电流:5 mA 工作电压:2.5 V to 5.5 V 电源电流:0.9 mA 功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 25 C 封装 / 箱体: 封装:Reel |
| GP1UM267XK | 功能描述:RECEIVER REMOTE CTRL TOP 56.8KHZ RoHS:否 类别:传感器，转换器 >> 光学 - 光电检测器 - 遥控接收器 系列:* 标准包装:250 系列:* |
| GP1UM267XK0F | 功能描述:红外接收机 Rem Cont Rec 5V 56.8 kHz RoHS:否 制造商:Vishay Semiconductors 载频:20 kHz to 60 kHz 传输距离:5 m 显示角:+/- 50 deg 高电平脉冲宽度: 低电平脉冲宽度: 最小高电平输出电压: 输出电流:5 mA 工作电压:2.5 V to 5.5 V 电源电流:0.9 mA 功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 25 C 封装 / 箱体: 封装:Reel |
| GP1UM26RK | 功能描述:RECEIVER REMOTE CTRL TOP 40KHZ RoHS:否 类别:传感器，转换器 >> 光学 - 光电检测器 - 遥控接收器 系列:* 标准包装:250 系列:* |
发布紧急采购，3分钟左右您将得到回复。