- 您现在的位置：买卖IC网 > PDF目录60608 > GP24BC04 (GTM CORPORATION) 2-WIRE SERIAL EEPROM PDF资料下载
参数资料
| 型号： | GP24BC04 |
| 厂商： | GTM CORPORATION |
| 元件分类： | EEPROM |
| 英文描述： | 2-WIRE SERIAL EEPROM |
| 中文描述： | 2线串行EEPROM的 |
| 文件页数： | 2/9页 |
| 文件大小： | 286K |
| 代理商： | GP24BC04 |
GP24BC01/02/02/04/08/16
Page: 2/9
ISSUED DATE :2006/08/17
REVISED DATE :
Figure 2. Block Diagram
PIN Descriptions
Serial Data (SDA): The SDA pin used for sending and receiving data bits in serial mode. Since the SDA pin is
defined as an open-drain connection, a pull-up resistor is needed.
Serial Clock (SCL): The SCL input is used to synchronize data input and output with the clocked out on the
falling edge of SCL.
Device/Page Addresses (A2, A1, A0): The A2, A1, and A0 pins are used to address multiple devices on a
single bus system and should be hard-wired.
The GP24BC01 and GP24BC02 use the A2, A1 and A0 pins to provide the capability for addressing up to
eight 1K/2K devices on a single bus system (please see the Device Addressing section for further details)
&The GP24BC04 uses the A2 and A1 inputs and a total of for 4K device may be addressed on a single bus
system. The A0 pin in not used, but should be grounded if possible.
&The GP24BC08 only uses the A2 input hardwire addressing. On a single bus system, a total of two 8K
devices may be addressed. The A0 and A1 pins are not used, but should be grounded if possible.
&The GP24BC16 does not uses the device address pins, so only one device can be connected to a single
bus system. Therefore, the A0, A1 and A2 pins are not used, but should be grounded if possible.
Write Protect (WP): The GP24BC01/02/04/08/16 has a Write Protect pin that provides hardware data
protection. When connected to ground, the Write Protect pin allows for normal read/write operations. If the WP
pin is connected to VCC, no data can be overwritten.
相关PDF资料 |
PDF描述 |
|---|---|
| GP24BC08 | 2-WIRE SERIAL EEPROM |
| GP24BC16 | 2-WIRE SERIAL EEPROM |
| GP30A | SINTERED GLASS PASSIVATED JUNCTION RECTIFIER |
| GP30A | GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER |
| GP30B | SINTERED GLASS PASSIVATED JUNCTION RECTIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GP24BC08 | 制造商:GTM 制造商全称:GTM 功能描述:2-WIRE SERIAL EEPROM |
| GP24BC16 | 制造商:GTM 制造商全称:GTM 功能描述:2-WIRE SERIAL EEPROM |
| GP24G | 制造商:Gold Peak Industries 功能描述:AAA 1.5V |
| GP24G-40 | 制造商:GP BATTERIES 功能描述:BATTERY ZINC CHLORIDE AAA PK40 制造商:GP BATTERIES 功能描述:BATTERY, ZINC CHLORIDE, AAA, PK40 制造商:GP BATTERIES 功能描述:BATTERY, ZINC CHLORIDE, AAA, PK40; Battery Size Code:AAA; Battery Voltage:1.5V; Battery Technology:Zinc Chloride; Battery Terminals:Flat Top; External Diameter:10.5mm; External Height:44.5mm; Weight:9g; Battery IEC Code:R03; Battery ;RoHS Compliant: NA |
| GP24G-U4 | 制造商:GP BATTERIES 功能描述:BATTERY ZINC CHLORIDE AAA PK4 制造商:GP BATTERIES 功能描述:BATTERY, ZINC CHLORIDE, AAA, PK4 制造商:GP BATTERIES 功能描述:BATTERY, ZINC CHLORIDE, AAA, PK4; Battery Size Code:AAA; Battery Voltage:1.5V; Battery Technology:Zinc Chloride; Battery Terminals:Raised Positive and Negative; External Diameter:10.5mm; External Height:44.5mm; Weight:9g; Battery IEC;RoHS Compliant: NA |
发布紧急采购，3分钟左右您将得到回复。