- 您现在的位置：买卖IC网 > Datasheet目录437 > GP2A231LRSA (Sharp Microelectronics)PHOTOINTERRUPTER REFLEC 7MM Datasheet资料下载
参数资料
| 型号： | GP2A231LRSA |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 4/5页 |
| 文件大小： | 0K |
| 描述： | PHOTOINTERRUPTER REFLEC 7MM |
| 标准包装： | 100 |
| 检测距离： | 0.118" ~ 0.276"（3mm ~ 7mm）可调 |
| 检测方法： | 反射 |
| 物体感测： | Kodak? 纸，黑色纸 |
| 安装类型： | 卡入式 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 封装/外壳： | 模块，连接器 |
| 包装： | 散装 |
| 特点： | 长焦距 |
| 其它名称： | 425-1912 |
GP2A231LRSA
Fig.5 Low Level Output Current vs.
Ambient Temperature
60
50
40
30
20
10
0
? 10
0
25
50
70 75
Ambient temperature T a ( ? C)
s Recommended Mounting Hole Shape
8-R0.1
8-R0.1
7.5
2.4
2.4
General mounting type
Reverse insertion
7.5
(Plate thickness:1.0mm)
preventive type
(Plate thickness:1.0mm)
1
1
1. It is recommended to mount the shear droop surface (punch side) of the mounting plate (metal plate) with " GP2A231LRSA ".
2. Mounting workability, shaking after mounting and mounting strength depend on the corner radius of the mounting plate and the
state of punching.
Determine the mounting dimensions after check on an actual machine.
3. General dimensional tolerances shall be ± 0.1 mm.
s Precautions for Use
1. In order to stabilize power supply line, connect a by-pass capacitor of more than 0.33 μ F between V CC and GND near the device.
2. For cleaning
Acryle resin is used as the material of the lens surface. As to cleaning, this refractive type photointerrupter shall not clean by
cleaning materials absolutely. Dust and stain shall clean by air blow, or shall clean by soft cloth soaked in washing materials.
3. The connector should be plugged in / out at normal temperature.
相关PDF资料 |
PDF描述 |
|---|---|
| GP2A25J0000F | SENSR OPTO REFL 1MM-9MM CON HORZ |
| GP2AP002S00F | PROXIMITY SENSOR 25MM |
| GP2D120XJ00F | SENSOR DIST MEAS 30CM ANLG W/JST |
| GP2D15J0000F | SENSOR DIST MEASUR 24CM DIGI |
| GP2S60A | PHOTOINTERRUPTER REFLEC .7MM SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GP2A231LRSAF | 功能描述:光学开关（反射型，光电IC输出） Subminiature Light Mod Reflective Type RoHS:否 制造商:Optek 输出设备:Open Collector, Inverter 感应距离:12.7 mm 最大工作温度:+ 85 C 最小工作温度:- 40 C 高电平输入电压:2.9 V 低电平输出电压:0.4 V 低电平输出电流:16 mA 封装: |
| GP2A240LCS0F | 功能描述:光学开关（反射型，光电IC输出） Photointerrupter OPIC Light Mod RoHS:否 制造商:Optek 输出设备:Open Collector, Inverter 感应距离:12.7 mm 最大工作温度:+ 85 C 最小工作温度:- 40 C 高电平输入电压:2.9 V 低电平输出电压:0.4 V 低电平输出电流:16 mA 封装: |
| GP2A25 | 功能描述:PHOTOINTERRUPTER REFLEC 7MM RoHS:否 类别:传感器，转换器 >> 光学 - 反射式 - 逻辑输出 系列:- 标准包装:1 系列:E3T 检测距离:* 检测方法:反射式，背景抑制 物体感测:白色纸 输出配置:NPN - 开路集电极/亮光 光感测:红 安装类型:面板安装 电流 - 电源:20mA 电源电压:12 V ~ 24 V 封装/外壳:模块，预接线 包装:散装 特点:超扁平形 其它名称:E3T/FL21 2ME3TFL212M |
| GP2A25B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Photointerrupter |
| GP2A25DJ000F | 制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:Detecting Distance : 1 to 9mm OPIC Output, Refl ective Photointerrupter with Connector |
发布紧急采购，3分钟左右您将得到回复。