参数资料
型号: GPFM115-48G
厂商: SL Power Electronics Manufacture of Condor/Ault Brands
文件页数: 1/2页
文件大小: 0K
描述: PWR SUPPLY MEDICAL PFC 115W 48V
标准包装: 1
系列: GPFM115
类型: 标准产品
输出数: 1
输出电压: 48V
输入电压: 85 ~ 264VAC
输出 - 1 @ 电流(最大): 48 VDC @ 1.7A
功率(瓦特): 115W
电源类型: 开关(开放框架)
应用: 医用型
安装类型: 底座安装
尺寸/尺寸: 5.25" L x 3.30" W x 1.50" H(113.4mm x 83.8mm x 38.1mm)
工作温度: 0°C ~ 50°C
效率: 81%
电源(瓦特)- 最大: 115W
批准: CE,CSA,IEC,EN,TUV,UL
线路调节: 2%
负载调整: 2%
其它名称: 271-2661
GPFM115 Medical
115 Watt Global Performance Switchers
GLOBAL PERFORMANCE SWITCHERS
FEATURES:
? 115 Watts of continuous power with forced air
? Power factor corrected
? 74-81% efficiency
? Small package 3.3” x 5.25” x 1.5” inches
? Power fail warning, remote sense
? Optional cover with cooling fan
? Medical Approval to UL2601-1, CSA-C22.2
No. 601.1, EN60601-1
? RoHS Compliant Model Available (G suffix)
SPECIFICATIONS
Ac Input
85-264 Vac, 47-63 Hz single phase
Output Power
Continuous rating is 80 W with unrestricted natural convection, or 115 W with
forced convection. All models capable of 110% of rated power for 60 sec.,
10% duty cycle maximum.
Input Current
Maximum input current at 90 Vac, 60 Hz with full rated load is 1.7 A. Input
current harmonic content meets the requirements of IEC1000-3-2 for all load
conditions at 230 Vac input. Active input circuitry provides high power factor
of .96 min, .99 typical.
Inrush Current
Inrush 240 Vac is less than 37 A, averaged over thr first ac halfcycle under cold
start conditions. Limiting provided by internal thermistors.
Holdup Time
25 ms minimum from loss of ac input at full load.
Power Fail
TTL / CMOS compatible output goes low (<0.5 V) 8 ms before output voltage
drops more than 4% below nominal voltage upon loss of ac power. The signal is
factory set to trip before there is insufficient power stored in the primary to sus-
tain the output. Signal can sink 1.6 mA or source 400 μA at 2.7 V (Fan-out = 1).
Efficiency
74 to 81% depending upon model
DC Output Specification
Total regulation is the maximum deviation from the nominal voltage for all
steady state loading conditions. Peak ratings are for 60 s maximum duration,
10% duty cycle. Consult factory for application assistance.
Remote Sense
Provided as a standard feature on all models. Capable of compensating for
0.25 V total of cabling losses.
Overload Protection
Fully protected against short circuit and output overload. Short circuit protec-
tion is cycling type power limit. Recovery after fault is automatic. Consult
factory for specific condition limits.
Overvoltage Protection
Built in on all models - See voltage and current chart for individual model
output limits. When OVP fires, the output converter stops providing input
power to output. Output voltage decay is dependent upon loading.
Output Noise
0.5% rms, 1% pk-pk, 20 MHz Bandwidth, differential mode. Measured with
noise probe directly across output terminals of the power supply.
DC Power Supplies
Transient Response
Main Output 500 μs typical response time for return to within 0.5% of final value
for a 50% load step change, ?i/?t<0.2 A/μs. Maximum voltage deviation is 3.5%.
Minimum Load
No minimum load required to maintain output specifications. An abrupt change in
output current from > 90% to < 2% load may cause a false triggering of the power
fail signal.
Voltage Adjustment
Main output ±5%.
Temperature Coefficient
0.03%/°C typical on all outputs.
Thermal Shutdown
Provided as a standard feature. Designed to protect unit from prolonged over
temperature.
Fan Output
An additional 12 Vdc (nominal 10.5 V), 100 mA output suitable for powering a dc
fan is included in all models. The fan output is referenced to +out. Due to high
pk-pk noise and low regulation, it is not recommended that this output be used
for any other purpose.
Input Protection
Internal ac fuse provided on all models. Fuse does not blow on overload or short
circuit -- fuse blows only if a catastrophic failure occurs in the unit.
EMI/EMC Compliance
All models include built-in EMI filtering to meet the following emissions require-
ments:
EMI SPECIFICATIONS COMPLIANCE LEVEL
Conducted Emissions EN55011 Class B; FCC Class B
Static Discharge EN61000-4-2, 6 kV contact, 8 kV air
RF Field Susceptibility EN61000-4-3, 3 V/meter
Fast Transients/Bursts EN61000-4-4, 2 kV, 5 kHz
Surge Susceptibility EN61000-4-5, 1 kV diff., 2 kV com.
Line Frequency Harmonics EN61000-3-2 Class A
Conducted RF Susceptibility EN61000-4-6, 3 V
Voltage Dips and Interruptions EN61000-4-11, Consult factory for more
details.
Leakage Current
90 μA normal conditions (132 Vac @ 60 Hz input) or 250 μA (264 Vac) single fault.
Medical Safety
All models are Certified to be in compliance with the applicable requirements of
UL 2601, CSA 22.2 No. 601.1-M90, IEC 601-1 (1988), EN 60601-1: 1990. (Consult
factory for approval status)
All specifications are typical at nominal input, full load at 25 O C unless otherwise stated
相关PDF资料
PDF描述
REC5-2405SRW/H2/A/SMD-R CONV DC/DC 5W 18-36VIN 05VOUT
P51-750-A-B-M12-20MA-000-000 SENSOR 750PSI 1/8-27NPT 4-20MA
P51-500-A-S-I36-20MA-000-000 SENSOR 500PSI 1/4-18NPT 4-20MA
P51-2000-S-S-P-4.5V-000-000 SENSOR 2000PSI 1/4-18NPT .5-4.5V
P51-1500-A-E-MD-4.5OVP-000-000 SENSOR 1500PSI 3/8-24UNF .5-4.5V
相关代理商/技术参数
参数描述
GPFM115-5 功能描述:线性和开关式电源 115W 5.1V @ 12A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
GPFM115-5C 制造商:SL Power Electronics 功能描述:- Bulk
GPFM115-5G 功能描述:线性和开关式电源 115W 5.1V @ 12A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
GPFM1200 制造商:SLPOWER 制造商全称:SL Power Electronics 功能描述:1200 WATT GLOBAL PERFORMANCE SWITCHERS
GPFM1200-48 功能描述:线性和开关式电源 48V 25A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度: