参数资料
型号: GT-70
厂商: Master Appliance Co
文件页数: 2/6页
文件大小: 0K
描述: GEN IND TORCH BUTANE PWR
标准包装: 6
类型: 丁烷吹管
温度范围: 2500°F(1371°C)
特点: 80 ml 可补充油箱,防儿童开启(符合 CPSC 法规)
THE GT-70 INDUSTRIAL TORCH DOES NOT CONTAIN BUTANE GAS WHEN PURCHASED
GAS REFILLING
? Use only Master Ultratane? Butane Fuel.
? Shake gas container a few times to warm fuel up.
? Make sure the Fuel Adjustment Knob is in the “OFF” position (fully clockwise).
? Insert the Butane container nozzle tip vertically down into the unit gas valve
refill opening. Use a pumping action for best results (Figure 1).
OFF
? After filling, allow a few minutes for the gas to stabilize.
IGNITION
? Turn the Fuel Adjustment Knob counter-clockwise 1 full turn. (Figure 2)
? To Ignite: Push Safety Slide Bar up and hold while depressing Ignition
Trigger (Figure 3). When you remove pressure from the ignition trigger,
FERMé
DESACTIVADO
1
unit will shut off instantly.
? For Hands Free Mode: Push Hands Free ON/OFF slide switch foreword
while depressing trigger (Figure 4). To shut off unit, return slide switch to
“OFF” position.
? Note: It is sometimes difficult to ignite when the Air Control Ring covers
the air control holes. Adjust Accordingly.
FLAME ADJUSTMENT
? Adjust the torch flame length by turning the Fuel Adjustment Knob (+) (-)
(Figure 2). Don’t make the flame too long as it will only waste the gas and
make the flame unstable.
? Turn the Air Control Ring forward to convert the blue pinpoint flame to a
soft/cooler flame. CAUTION: Air Control Ring can be very hot.
STORAGE
? Turn the Fuel Adjustment Knob clockwise to “OFF” position until snug.
Let tool cool down before storing.
? To prevent gas leakage make sure Hands Free ON/OFF Slide switch is
returned completely to “OFF” position.
WARNINGS:
1. Read Instructions Before Operation.
2. Keep out of reach of children.
LOCK
LOCK
ON
ENGAGé
ACTIVADO
2
3
4
3. Do not touch flame guard when HOT!
4. Use only Master Ultratane? Butane Fuel. Butane gas is extremely flammable, please handle
with care.
5. Always point away from your face, eyes, and body when igniting or during operation.
6. Do not store under direct sunlight or anywhere temperature will exceed 104°F/40°C.
7. Make sure the Fuel Adjustment Knob is firmly closed (Figure 2) and flame is completely
extinguished after using.
8. After using let tool cool down before storing.
9. Keep the nozzle clean from dust and do not drop the torch as these may cause malfunctions.
10. Do not continually use this tool for over 1 hour.
11. Never puncture or dispose of in a fire.
12. Read and follow all instructions and cautions on the fuel canister.
WARNING: This product, when used for soldering and similar applications, produces chemicals
known to the state of California to cause cancer and birth defects or other reproductive harm.
WARNING: The Department of Transportation Hazardous Material Regulations forbid carriage of
butane or other flammable gas products on passenger aircraft. Do not pack this item or any other
flammable gas item, in any checked or carry-on baggage.
Contains flammable gas under pressure. Do not use near sparks or open flame. Do not puncture
or incinerate container or store at temperatures above 120° F. Keep out of reach of children.
相关PDF资料
PDF描述
H.FL-LP-N TOOL REMOVAL FL SERIES
HFA135NH40 DIODE HEXFRED 400V 135A HALF-PAK
HFA180NH40 DIODE HEXFRED 400V 180A HALF-PAK
HL1802E-070519 HOT AIR GUN REFLECTOR
HM31-31050LF ENCAPSULATED CURRENT SENSE TRANS
相关代理商/技术参数
参数描述
GT700000018 制造商:3M Electronic Products Division 功能描述:3M 4500 White Protective Coverall M
GT700000026 制造商:3M Electronic Products Division 功能描述:3M 4500 White Protective Coverall
GT700000042 制造商:3M Electronic Products Division 功能描述:3M 4500 White Protective Coverall
GT700000109 制造商:3M Electronic Products Division 功能描述:3M 4500 Blue Protective Coverall
GT700000117 制造商:3M Electronic Products Division 功能描述:3M 4500 Blue Protective Coverall