参数资料
型号: GT2153
厂商: GTM CORPORATION
元件分类: 线性稳压
英文描述: 5.0 AMP POSITIVE VOLTAGE REGULATOR
中文描述: 5.0放大器正电压稳压器
文件页数: 3/5页
文件大小: 490K
代理商: GT2153
3/5
ISSUED DATE :2005/03/16
REVISED DATE :
Advanced Application
Ordering Information ( contd. )
Part Number
Marking
Output Voltage
Part Number
Marking
Output Voltage
GT2153-AD
3EAD3
XXXX
Adjustable
Detailed Description
The GT2153 of COMS regulators contain a PMOS pass transistor, voltage reference, error amplifier,
over-current protection, thermal shutdown and Power Good detection circuitry.
The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal
protection circuits. During normal operation, the error amplifier compares the output voltage to a precision
reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds
150 : , or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal
operation is restored when the junction temperature drops below 120 : .
The GT2153 switches from voltage mode to current mode when the load exceeds the rated output current.
This prevents over-stress. The GT2153 also incorporates current fold-back to reduce power dissipation when
the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces
the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts.
External Capacitors
The GT2153 is stable with an output capacitance to ground of 2.2 F or greater. Ceramic capacitors have the
lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the
highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are
comparatively expensive. One option is to parallel a 0.1 F ceramic capacitor with a 10 F Aluminum Electrolytic.
The benefit is low ESR, high capacitance, and low overall cost.
A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should
be at least 0.1 F to have a beneficial effect.
All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This
can be achieved with a “Star” connection.
Enable
The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all
internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much
like an electronic switch.
Power Good
The GT2153 includes the Power Good feature. When the output is not within D15% of the specified voltage, it
pulls low. This can occur under the following conditions:
1) Input Voltage too low.
2) During Over-Temperature.
3) During Over-Current.
4) If output is pulled up.
(Note: PG pin is an open-drain output.)
相关PDF资料
PDF描述
GT21MABE Sealed Ultraminiature Toggle Switches
GT21MAVBE Sealed Ultraminiature Toggle Switches
GT21MCBE Sealed Ultraminiature Toggle Switches
GT21MSCBETR Sealed Ultraminiature Toggle Switches
GT21MV3BE Sealed Ultraminiature Toggle Switches
相关代理商/技术参数
参数描述
GT-215J 制造商:NEC TOKIN Corporation 功能描述:15A 84~50.8~39mm idF250V +55 -20 t@Xg[q 84mm 50.8mm 39mm
GT2-15-T 制造商:Cosel Usa Inc 功能描述:
GT-215U 制造商:NEC 制造商全称:NEC 功能描述:Noise Filters
GT-2160SF-10 制造商:NEC 制造商全称:NEC 功能描述:Noise Filters
GT2-1800 制造商:Power Acoustik 功能描述:Gothic Series 360W X 2Ch Autosound Amplifier 制造商:POWER ACOUSTIK 功能描述:AUTOSOUND AMPLIFIER GOTHIC SERIES 360W X 2CH