参数资料
型号: H-38-11
厂商: Bourns Inc.
文件页数: 37/73页
文件大小: 0K
描述: HDWR NUT MOUNTING FOR ECW ENCODR
产品变化通告: H-38-11 Hardware Change 26/Jul/2010
标准包装: 1,000
产品目录页面: 2575 (CN2011-ZH PDF)
配用: ECW1DB24BC0024-ND - ENCODER DIGITAL CONT 24 CPR
ECW1JB24BC0024-ND - ENCODER DIGITAL CONT 24 CPR
Application Notes
Incremental encoders can also be used to drive
standard up/down counters. In such cases, we suggest
using interface ICs similar to the LS7083 and LS7084
Encoder to Counter Interface Chips manufactured by
US Digital. The diagram in Figure 21 shows a typical
circuit con?guration for an encoder applied to drive
an up/down counter. For additional information and
speci?cation sheet for these devices, visit US Digital’s
website at http://www.usdigital.com.
Figure 21: Up/Down Counter Driver Circuit
ENS Style Encoders
Radial Load Axial Load (lb) L 10 Life (Hrs)
(lb) Push Pull 100 RPM 3,000 RPM
Encoders
Application Information for EN Series Optical
Encoder
Bourns? optical encoder produces a 2-bit quadrature
signal that is suitable for digital systems where both
magnitude and direction of adjustment must be
provided. Utilizing solid-state electronics to create
the output signal, these encoders have no contacts
that will wear or create electrical noise. The optical
encoder is ideal as a digital panel control or a
position-sensing device in applications where long
life, reliability, accuracy, and high resolution are
critical.
Rotational Speed/Life
Most bushing mount encoders on the market are
limited to rotational speeds of 300 rpm and have a
rotational life of 10 x 10 6 revolutions. To increase
operating speed and life speci?cations, ball bearing
shaft supports are added. For high speed and/or
extended life applications, Bourns offers shaft ball
bearings in either bushing or ?ange mount versions.
With ball bearings, the EN series is capable of
operating speeds of 3000+ rpm with a rotational life
5.5 x 10
1.2 x 10
2.4 x 10
1.0
0.5
3.0
1.5
2.5
5.0
10.0
1
0
3
0
0
0
0
0
1
0
3
0
0
5
8.3 x 10 6
8.3 x 10 6
5
5.5 x 10 5
6
1.4 x 10 5
4
1.7 x 10 5
1.7 x 10 5
1.1 x 10 4
1.1 x 10 4
2.9 x 10 3
2.9 x 10 3
4.8 x 10 2
of up to 5 x 10 8 revolutions.
Shaft Loading
To accurately predict the rotational life of an
encoder, the end (axial) and side (radial) loading
forces should be understood. The relationship
between shaft loading and rotational life for the EN
series is expressed in the tables below. Life is shown
Notes:
1) Radial loads are assumed to be applied 1/2” from the front
mounting surface (FMS)
2) The static load rating (C 0 ) is 10.7 lbs. for ENT and ENW styles
(1/8” shaft dia.) and 21 lbs. for ENS versions (1/4” shaft dia.).
3) If R=radial load, AP=axial push load and APL=axial pull load,
recommended loading limits are as follows:
2R + APL < C 0 and,
R + AP <C 0
here in operating hours (of continuous rotation) at
the speed indicated.
Note: Life rating estimates are based on metal fatigue
failure criteria. Retention of lubricants may be a
limiting factor in extended life applications.
ENT and ENW Style Encoders
Radial Load Axial Load (lb) L 10 Life (Hrs)
(lb) Push Pull 100 RPM 3,000 RPM
1.0
0.5
1
0
0
1
4.3 x 10 6
4.3 x 10 6
8.5 x 10 4
8.5 x 10 4
3.0
3
0
2.8 x 10
5
5.6 x 10 3
1.5
0
3
2.8 x 10 5
5.6 x 10 3
2.5
0
0
4.8 x 10
5
9.6 x 10 3
5.0
0
0
6.0 x 10 4
1.2 x 10 3
1.1 x 10
36
10.0
0
5
4
2.2 x 10 2
相关PDF资料
PDF描述
H-90 ADJUSTMENT TOOL
HB-60-2 CORD PATCH BANANA PLUG 60" RED
HD33A1EN HEADLIGHT 3 LED W/3AAA
HD5L33AE HEADLIGHT 5 LED W/3AAA
HDL33A2E HEADLIGHT 6 LED W/3AAA
相关代理商/技术参数
参数描述
H-381-14 制造商:ETC MOLEX-INACTIVE 功能描述:Cross Referenced to MOLEX - Part: MOL19193-0330
H-381-38 制造商:ETC MOLEX-INACTIVE 功能描述:Cross Referenced to MOLEX - Part: MOL19193-0331 制造商:Molex 功能描述:Ring Tongue Terminal (1/0)AWG 48.77mm 21.34mm Electro-Tin Bag
H-38-14 功能描述:电位计工具及硬件 H-038 HARDWARE RoHS:否 制造商:Vishay/Spectrol 产品:Adapter Kit
H-38-15 功能描述:电位计工具及硬件 HARDWARE - NUT RoHS:否 制造商:Vishay/Spectrol 产品:Adapter Kit
H-381-56 制造商:ETC MOLEX-INACTIVE 功能描述:Cross Referenced to MOLEX - Part: MOL19193-0333