参数资料
| 型号： | HA1-2420-2 |
| 厂商： | Intersil |
| 文件页数： | 9/11页 |
| 文件大小： | 0K |
| 描述： | IC AMP SAMPLE&HOLD 3.2US 14-DIP |
| 标准包装： | 25 |
| 放大器类型： | 采样和保持 |
| 电路数： | 1 |
| 转换速率： | 5 V/µs |
| 增益带宽积： | 2.5MHz |
| 电流 - 输入偏压： | 40nA |
| 电压 - 输入偏移： | 2000µV |
| 电流 - 电源： | 3.5mA |
| 电流 - 输出 / 通道： | 15mA |
| 电压 - 电源，单路/双路(±)： | ±12 V ~ 15 V |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 14-CDIP（0.300"，7.62mm） |
| 供应商设备封装： | 14-CERDIP |
| 包装： | 管件 |
7
FN2856.7
October 24, 2013
Glossary of Terms
Acquisition Time
The time required following a “sample” command, for the output
to reach its final value within
±0.1% or ±0.01%. This is the
minimum sample time required to obtain a given accuracy, and
includes switch delay time, slewing time and settling time.
Aperture Time
The time required for the sample-and-hold switch to open,
independent of delays through the switch driver and input
amplifier circuitry. The switch opening time is that interval
between the conditions of 10% open and 90% open.
Effective Aperture Delay Time (EADT)
The difference between the digital delay time from the Hold
command to the opening of the S/H switch, and the
propagation time from the analog input to the switch.
EADT may be positive, negative or zero. If zero, the S/H
amplifier will output a voltage equal to VIN at the instant the
Hold command was received. For negative EADT, the output in
Hold (exclusive of pedestal and droop errors) will correspond to
a value of VIN that occurred before the Hold command.
Aperture Uncertainty
The range of variation in Effective Aperture Delay Time.
Aperture Uncertainty (also called Aperture Delay Uncertainty,
Aperture Time Jitter, etc.) sets a limit on the accuracy with
which a waveform can be reconstructed from sample data.
Drift Current
The net leakage current from the hold capacitor during the
hold mode. Drift current can be calculated from the droop
rate using the formula:
-IN
+IN
V-
V+
GND
CONTROL
OUT
HOLD
CAPACITOR
FIGURE 9. GUARD RING LAYOUT (BOTTOM VIEW)
ID (pA)
CH (pF)
ΔV
Δt
--------
×
(V s
)
=
HA-2420
相关PDF资料 |
PDF描述 |
|---|---|
| HA1-2540-5 | IC OP AMP 400MHZ MONO 14-CDIP |
| HA1-5104-2 | IC OPAMP VFB QUAD 8MHZ 14-DIP |
| HA1-5330-5 | IC AMP SAMPLE&HOLD 650NS 14-DIP |
| HA3-2539-5 | IC OPAMP 600MHZ 600V/US 14-DIP |
| HA3-4741-5 | IC OPAMP QUAD 3.5MHZ 14-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HA1-2420-2B1121-034 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HA1-2420B1121-034 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HA1-2420B1686 DIE | 制造商:Harris Corporation 功能描述: |
| HA1-2420B1740-001 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HA1-2420B2170-002 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
发布紧急采购，3分钟左右您将得到回复。