- 您现在的位置：买卖IC网 > PDF目录364793 > HB28D032C8C EEPROM PDF资料下载
参数资料
| 型号： | HB28D032C8C |
| 元件分类： | EEPROM |
| 英文描述： | EEPROM |
| 中文描述： | EEPROM的 |
| 文件页数： | 40/67页 |
| 文件大小： | 197K |
| 代理商： | HB28D032C8C |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页当前第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页
HB28D096/032A8HSR
38
9. Status register:
This register is read only register, and it indicates the card status of command execution.
When this register is read in configured I/O card mode (INDEX = 1, 2, 3) and level interrupt mode, -IREQ is
negated. This register should be accessed in byte mode. In word mode, it is recommended that Alternate
status register may be used as this register.
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
BSY
DRDY
DWF
DSC
DRQ
CORR
IDX
ERR
bit
Name
Function
7
BSY (BuSY)
This bit is set when the card internal operation is executing. When
this bit is set to "1", other bits in this register are invalid.
6
DRDY (Drive ReaDY)
If this bit and DSC bit are set to "1", the card is capable of receiving
the read or write or seek requests. If this bit is set to "0", the card
prohibits these requests.
5
DWF (Drive Write Fault)
This bit is set if this card indicates the write fault status.
4
DSC (Drive Seek Complete)
This bit is set when the drive seek complete.
3
DRQ (Data ReQuest)
This bit is set when the information can be transferred between the
host and Data register. This bit is cleared when the card receives
the other command.
2
CORR (CORRected data)
This bit is set when a correctable data error has been occurred and
the data has been corrected.
1
IDX (InDeX)
This bit is always set to "0".
0
ERR (ERRor)
This bit is set when the previous command has ended in some type
of error. The error information is set in the other Status register or
Error register. This bit is cleared by the next command.
10. Alternate status register:
This register is the same as Status register in physically, so the bit assignment
refers to previous item of Status register. But this register is different from Status register that -IREQ is not
negated when data read.
11. Command register:
This register is write only register, and it is used for writing the command at
executing the drive operation. The command code written in the command register, after the parameter is
written in the Task File during the card is Ready state.
相关PDF资料 |
PDF描述 |
|---|---|
| HB28D032C8HSR | HB28D096C8HSR/HB28D032C8HSR Datasheet |
| HB28D096A8H | HB28D096A8H/HB28D032A8H Datasheet |
| HB526A464EN-12 | x64 SDRAM Module |
| HB526C164EN-10 | x64 SDRAM Module |
| HB526C164EN-12 | x64 SDRAM Module |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HB28D032C8HSR | 制造商:Renesas Electronics Corporation 功能描述:Flash Card 32M-Byte 3.3V/5V CompactFlash 50-Pin |
| HB2A102K-S265B | 制造商:Hitano Enterprise Corp 功能描述:Bulk |
| HB2A102K-S565B | 制造商:Hitano Enterprise Corp 功能描述:Bulk |
| HB2A103K-S565B | 制造商:Hitano Enterprise Corp 功能描述: |
| HB2A122K-S265B | 制造商:Hitano Enterprise Corp 功能描述: |
发布紧急采购，3分钟左右您将得到回复。