- 您现在的位置：买卖IC网 > PDF目录371784 > HCS509 (Microchip Technology Inc.) KEELOQ Code Hopping Encoder Product Brief*(KeeLoq 译码器，是NTQ109和NTQ106的替代品) PDF资料下载
参数资料
| 型号： | HCS509 |
| 厂商： | Microchip Technology Inc. |
| 英文描述： | KEELOQ Code Hopping Encoder Product Brief*(KeeLoq 译码器，是NTQ109和NTQ106的替代品) |
| 中文描述： | 而Keeloq跳码编码器产品简介*（而Keeloq译码器，是NTQ109和NTQ106的替代品） |
| 文件页数： | 5/16页 |
| 文件大小： | 117K |
| 代理商： | HCS509 |
1996 Microchip Technology Inc.
Preliminary
DS40147A-page 5
HCS509
3.0
DESCRIPTION OF FUNCTIONS
3.1
Master Transmitter
In learning mode the decoder can be set up so that the
first transmitter that is learned becomes the master
transmitter. The master transmitter will not be erased
when more than the maximum transmitters are learned.
The master transmitter can be used to implement
higher privileges in a system such as activating learn-
ing. When the master transmitter is activated the asso-
ciated function outputs as well as the MASTER output
are activated. To implement a master learn the MAS-
TER output can be inverted to control the LRNIN input.
3.2
Delayed Mode
The delayed mode can be used to implement a function
associated with activating a transmitter for an extended
period of time such as panic. Delayed mode is handled
differently for encoders with delay mode transmission
commands (NTQ106, HCS360/361) than encoders
without delay mode transmission commands (HCS200/
300/301). The DELAY output is activated when a “delay
transmission command” is received or when the same
transmissions are received consecutively for 4 sec-
onds.
3.3
Repeat
The REPEAT output is activated for 50 ms every time a
repeated code is received. The REPEAT output is also
used to indicate successful learning. The transmitter
should be activated during the first and second steps of
learning until the REPEAT output goes high.
3.4
Latched
The F1L (Function 1 latched) output can be used to
implement a nonvolatile latch function. F1L will change
state every time F1 is activated and return to the state
it was in after power loss.
4.0
OUTPUT MAPPING
The HCS509 supports the NTQ109’s output format.
These are: F1, F2, F1L, F3, REPEAT, MASTER, and
DELAY outputs. Additional to these outputs the
HCS509 also supports a binary output of the function
code [S3 S2 S1 S0] which allows the decoder to use all
the button codes of the new HCS encoders (Table 4-1).
FIGURE 4-1:
FUNCTION OUTPUT TABLE
Function
Code
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Note:
DAT[S3] CLK[S2]
F3
F2[S1]
F1[S0]
F1L
Description
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
1
1
0
0
1
1
0
0
1
1
1
0
0
0
1
0
1
0
1
0
1
0
1
0
1
T
F1 on NTQ109, F1L toggle/Binary output
F2 on NTQ109/Binary output
F3 on NTQ109/BInary output
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
Binary output [S3 S2 S1 S0]
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC = No Change; T = Toggle.
相关PDF资料 |
PDF描述 |
|---|---|
| HCS573KMSR | Radiation Hardened Octal Transparent Latch, Three-State |
| HCS573D | Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control |
| HCS573DMSR | Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control |
| HCS573K | Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control |
| HCS573MS | Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HCS509-/P | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Remote-Control Receiver/Decoder |
| HCS509-/SN | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Remote-Control Receiver/Decoder |
| HCS509-I/P | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Remote-Control Receiver/Decoder |
| HCS509-I/SN | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Remote-Control Receiver/Decoder |
| HCS512 | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:KEELOQ CODE HOPPING DECODER |
发布紧急采购，3分钟左右您将得到回复。