- 您现在的位置：买卖IC网 > PDF目录60777 > HD-0313M3-FH 225 MHz - 400 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER PDF资料下载
参数资料
| 型号： | HD-0313M3-FH |
| 元件分类： | 耦合器 |
| 英文描述： | 225 MHz - 400 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| 文件页数： | 8/9页 |
| 文件大小： | 613K |
| 代理商： | HD-0313M3-FH |
34
sMounting Method
Figure 1.
Figure 3.
Figure 4.
Fastening screw
Microstrip board
Micro stripline
Tab
Figure 2.
The three types of mounting methods
illustrated in the diagrams below will
mount the card coupler for use under
optimum conditions.
The fastening screws in the diagrams
are M2 screws tightened to 1.5 kg cm.
When the tip of the micro stripline is of
Teflon type material ( r = 2.6), C
chamfering of C1 is performed at t1.6,
and of C0.5 at t1.2.
The side view diagrams of Figure 1 are
illustrated in Figures 2, 3, and 4 below.
Gap S between the card coupler and
the microstrip board surface should be
used to agree with the following
conditions.
Below 500 MHz ........S≤0.5 mm
500 to 2300 MHz......S≤0.25 mm
Above 2300 MHz......S≤0.15 mm
(
Metal plate or conductive spacer
qWhen the Ground Board is Constructed of 0.4 mm Stainless and 0.8 mm Aluminum
(When the Thickness of the Microstrip Board is 1.6 or 1.2 mm)
For t1.6 boards, use with the stainless case of the card coupler facing upward. For t1.2 boards,
use with the aluminum case of the card coupler facing upward. Mount and fix the card coupler
with fastening screws as illustrated in Figure 2. Next, solder the tabs and micro stripline, then
use.
(When the Thickness of the Microstrip Board is Greater than 1.6 mm)
Insert a metal plate or a conductive spacer between the coupler and ground, then mount as
illustrated in Figure 3 so that the surface of the tabs and the position of the microstrip board are
equal. Fix the card coupler with fastening screws as illustrated in Figure 3. Next, solder the tabs
and micro stripline, then use.
(When the Thickness of the Microstrip Board is Less than 1.2 mm)
Cut the ground at the position of the coupler and attach so that the surface of the tabs is in
contact with the micro stripline. Fix the card coupler with fastening screws as illustrated in Figure
4. Next, solder the tabs and micro stripline, then use.
∏
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
相关PDF资料 |
PDF描述 |
|---|---|
| HD-0660M3-GH | 470 MHz - 880 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-1800M3-CH | 1600 MHz - 2000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-6150M3-AH | 5900 MHz - 6400 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0430M3-CH | 360 MHz - 470 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0300M3-FH-1 | 225 MHz - 400 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HD03AQ7 | 制造商:BACO Controls Inc 功能描述: |
| HD03-T | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:0.8A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER |
| HD04 | 制造商:Lite-On 功能描述:Diode Bridge Single 400V 0.8A HDDF 制造商:Lite-On Electronics 功能描述:Diode Rectifier Bridge Single 400V 0.8A 4-Pin HDDF |
| HD-0430M3-CH | 制造商:HRS 制造商全称:HRS 功能描述:3 dB 90∑ Card Couplers |
| HD04-T | 功能描述:桥式整流器 400V 0.8A RoHS:否 制造商:Vishay 产品:Single Phase Bridge 峰值反向电压:1000 V 最大 RMS 反向电压: 正向连续电流:4.5 A 最大浪涌电流:450 A 正向电压下降:1 V 最大反向漏泄电流:10 uA 功率耗散: 最大工作温度:+ 150 C 长度:30.3 mm 宽度:4.1 mm 高度:20.3 mm 安装风格:Through Hole 封装 / 箱体:SIP-4 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。