参数资料
型号: HD404449H
元件分类: 微控制器/微处理器
英文描述: MROM, MICROCONTROLLER, PQFP80
封装: PLASTIC, QFP-80
文件页数: 2/33页
文件大小: 440K
代理商: HD404449H
HD404449 Series
8
RAM-Mapped Register Area ($000–$03F):
Interrupt Control Bits Area ($000–$003)
This area is used for interrupt control bits (figure 3). These bits can be accessed only by RAM bit
manipulation instructions (SEM/SEMD, REM/REMD, and TM/TMD). However, note that not all the
instructions can be used for each bit. Limitations on using the instructions are shown in figure 4.
Special Function Register Area ($004–$01F, $024–$03F)
This area is used as mode registers and data registers for external interrupts, serial interface 1, serial
interface 2, timer/counters, A/D converter, and as data control registers for I/O ports. The structure is
shown in figures 2 and 5. These registers can be classified into three types: write-only (W), read-only
(R), and read/write (R/W). RAM bit manipulation instructions cannot be used for these registers.
Register Flag Area ($020–$023)
This area is used for the DTON, WDON, and other register flags and interrupt control bits (figure 3).
These bits can be accessed only by RAM bit manipulation instructions (SEM/SEMD, REM/REMD, and
TM/TMD). However, note that not all the instructions can be used for each bit. Limitations on using
the instructions are shown in figure 4.
Memory Register (MR) Area ($040–$04F): Consisting of 16 addresses, this area (MR0–MR15) can be
accessed by register-register instructions (LAMR and XMRA). The structure is shown in figure 6.
Data Area ($090–$2EF): 464 digits from $090 to $25F have two banks, which can be selected by setting
the bank register (V: $03F). Before accessing this area, set the bank register to the required value (figure
7). The area from $260 to $2EF is accessed without setting the bank register.
Stack Area ($3C0–$3FF): Used for saving the contents of the program counter (PC), status flag (ST), and
carry flag (CA) at subroutine call (CAL or CALL instruction) and for interrupts. This area can be used as a
16-level nesting subroutine stack in which one level requires four digits. The data to be saved and the save
conditions are shown in figure 6.
The program counter is restored by either the RTN or RTNI instruction, but the status and carry flags can
only be restored by the RTNI instruction. Any unused space in this area is used for data storage.
相关PDF资料
PDF描述
HD4074008F 4-BIT, OTPROM, 9 MHz, MICROCONTROLLER, PQFP64
HD4074394S 4-BIT, OTPROM, MICROCONTROLLER, PDIP28
HD6433066F 32-BIT, MROM, MICROCONTROLLER, PQFP100
HD6433337YTF12 MROM, 12 MHz, MICROCONTROLLER, PQFP80
HD6433394F16 MROM, 16 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
HD404449SERIES 制造商:未知厂家 制造商全称:未知厂家 功能描述:
HD404449TF 制造商:未知厂家 制造商全称:未知厂家 功能描述:4-Bit Microcontroller
HD404458 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-bit HMCS400-series microcomputers
HD404458H 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-bit HMCS400-series microcomputers
HD404459 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-bit HMCS400-series microcomputers