- 您现在的位置：买卖IC网 > PDF目录260748 > HEDL-6540#B11 SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER PDF资料下载
参数资料
| 型号： | HEDL-6540#B11 |
| 元件分类： | 编、解码器及复用、解复用 |
| 英文描述： | SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER |
| 文件页数： | 9/14页 |
| 文件大小： | 228K |
| 代理商： | HEDL-6540#B11 |
4
Theory of Operation
The HEDS-65xx / HEDL-65xx translate the rotary motion
of a shaft into either a two or three channel digital
output.
The HEDS-65xx uses one of the standard HEDS-9000
or HEDS-9040 modules for encoding purposes. The
HEDL-654x uses the standard HEDL-9040 for encoding
purposes.
As seen in the block diagram, these modules contain a
single Light Emitting Diode (LED) as their light source
(emitter). The light is collimated into a single parallel
beam by means of a plastic lens located directly over
the LED. Opposite the emitter is the integrated detector
circuit (detector). This circuit consists of multiple sets
of photodetectors and the signal processing circuitry
necessary to produce the digital waveforms.
The codewheel rotates between the emitter and
detector, causing the light beam to be interrupted by a
pattern of spaces and bars on the codewheel. The pho-
todiodes which detect these interruptions are arranged
in a pattern that corresponds to the radius and design
of the codewheel. These detectors are also spaced such
that a light period on one pair of detectors corresponds
to a dark period on the adjacent pair of detectors. The
photodiode outputs are then fed into the signal pro-
cessing circuitry resulting in A, –A, B, and B (I and –Ialso in
the three channel encoders). Comparators receive these
signals and produce the final outputs for channels A and
B. Due to this integrated phasing technique, the digital
output of channel A is in quadrature with that of channel
B (90 degrees out of phase).
In the HEDS-6540 / HEDL-6540 the output of the com-
parator for the index pulse is combined with that of the
outputs of channel A and channel B to produce the final
index pulse. The index pulse is generated once every
rotation of the codewheel and is a one state width
(nominally 90 electrical degrees), true high index pulse.
It is coincident with the low states on channels A and B.
Definitions
Count (N): The number of bar and window pairs or counts
per revolution (CPR) of the codewheel.
One Cycle (C): 360 electrical degrees (e), 1 bar and
window pair.
One Shaft Rotation: 360 mechanical degrees, N cycles.
Position Error (
Θ): The normalized angular difference
between the actual shaft position and the position
indicated by the encoder cycle count.
Cycle Error (C): An indication of cycle uniformity. The
difference between an observed shaft angle which gives
rise to one electrical cycle, and the nominal angular
increment of 1/N of a revolution.
Pulse Width (P): The number of electrical degrees that an
output is high during one cycle. This value is nominally
180 e or 1/2 cycle.
PulseWidth Error (P):The deviation, in electrical degrees,
of the pulse width from its ideal value of 180 e.
State Width (S): The number of electrical degrees
between a transition in the output of channel A and the
neighboring transition in the output of channel B. There
are 4 states per cycle, each nominally 90 e.
State Width Error (S): the deviation, in electrical degrees,
of each state width from its ideal value of 90 e.
Phase (
Φ): the number of electrical degrees between the
center of high state on channel A and the center of the
high state on channel B. This value is nominally 90 e for
quadrature output.
Phase Error (
Φ): The deviation of the phase from its
ideal value of 90 e.
Direction of Rotation: When the codewheel rotates in
a counterclockwise direction (when viewed from the
encoder end of the motor) channel A will lead channel B.
If the codewheel rotates in the clockwise direction
channel B will lead channel A.
Index Pulse Width (P0): The number of electrical degrees
that an index output is high during one full shaft rotation.
This value is nominally 90 e or 1/4 cycle.
相关PDF资料 |
PDF描述 |
|---|---|
| HEDL-6545#B09 | SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER |
| HEDM-6540T13 | SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER |
| HDSP-5601-G0300 | SIGN DISPLAY, GREEN, 14.22 mm |
| HDSP-5601-GH200 | SIGN DISPLAY, GREEN, 14.22 mm |
| HDSP-5601-GH300 | SIGN DISPLAY, GREEN, 14.22 mm |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HEDL-6540-B13 | 制造商:AGILENT 制造商全称:AGILENT 功能描述:Large Diameter (56 mm), Housed Two and Three Channel Optical Enco |
| HEDL6545 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:QUADRANT/CIRCULAR DETECTOR |
| HEDL-6545 | 制造商:AGILENT 制造商全称:AGILENT 功能描述:Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders |
| HEDL-6545#B09 | 功能描述:编码器 3 Channel 1000 CPR 1/2in Line Driver RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C |
| HEDL-6545#J06 | 功能描述:编码器 3 Channel 1024 CPR 1/4in Line Driver RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C |
发布紧急采购，3分钟左右您将得到回复。