- 您现在的位置：买卖IC网 > PDF目录17777 > HF50ACC635050-T (TDK Corporation)FERRITE CHIP 600 OHM 3.0A 2520 PDF资料下载
参数资料
| 型号： | HF50ACC635050-T |
| 厂商： | TDK Corporation |
| 文件页数： | 2/17页 |
| 文件大小： | 0K |
| 描述： | FERRITE CHIP 600 OHM 3.0A 2520 |
| 产品目录绘图： | ACC635050 Series Top ACC635050 Series Side |
| 标准包装： | 1 |
| 系列： | ACC |
| 频率对应阻抗： | 600 欧姆 @ 100MHz |
| 额定电流： | 3A |
| DC 电阻(DCR)： | 最大 40 毫欧 |
| 滤波器类型： | 差模 - 单线 |
| 封装/外壳： | 2520（6450 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 高度（最大）： | 0.198"（5.04mm） |
| 尺寸/尺寸： | 0.252" L x 0.197" W（6.40mm x 5.00mm） |
| 其它名称： | 445-6179-6 |
(2/17)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131205 / beads_commercial_power_hf-acc_en.fm
相关PDF资料 |
PDF描述 |
|---|---|
| TPF11CGRA0 | SWITCH PUSH SPST-NO 0.4VA 20V |
| 38BM3-550 | SWITCH PUSH SPST-NO 0.4VA 20V |
| HF50ACC575032-T | FERRITE CHIP 400 OHM 3.0A 2220 |
| 38BM2-550 | SWITCH PUSH SPST-NO 0.4VA 20V |
| HF30ACC575032-T | FERRITE CHIP 270 OHM 3.0A 2220 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HF50ACC635050-TL | 制造商:TDK Epcos 功能描述: |
| HF50ACC635050-X | 制造商:TDK 制造商全称:TDK Electronics 功能描述:EMC Components Ferrite Beads SMD |
| HF50C120ACE | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| HF50S10 | 功能描述:Joystick, 3 - Axis Analog (Hall Effect) Output 制造商:apem inc. 系列:HF 零件状态:有效 类型:操纵杆，3 - 轴 致动器类型:操纵杆 开关功能:2 向旋转，360° 定向 功能，额外:- 输出:模拟（霍尔效应） 电压 - 电源:5VDC 额定电流:- 额定电压 - AC:- 额定电压 - DC:- 触头材料:- 触头镀层:- 安装类型:面板安装 端子类型:连接器 工作温度:-40°C ~ 70°C 面板开口尺寸:圆形 - 41.28mm 直径 侵入防护:IP67 - 防尘，防水 特性:- 机械寿命:5，000，000 次循环 电气寿命:- 作用力:280gf 标准包装:1 |
| HF-5102R2339 | 制造商:Harris Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。