- 您现在的位置：买卖IC网 > PDF目录239403 > HFBR-HNS15D (AGILENT TECHNOLOGIES INC) INTERCONNECTION DEVICE PDF资料下载
参数资料
| 型号： | HFBR-HNS15D |
| 厂商： | AGILENT TECHNOLOGIES INC |
| 元件分类： | 连接器件 |
| 英文描述： | INTERCONNECTION DEVICE |
| 文件页数： | 14/14页 |
| 文件大小： | 309K |
| 代理商： | HFBR-HNS15D |
3-57
guide tube. Holding the
unstripped cable securely,
squeeze the handles of the fiber
stripper to cut the fiber buffer
and pull straight to slightly
separate the buffer.
Release the fiber stripper
handles, remove the tool and
carefully slide the buffer off the
fiber by hand. Inspect the fiber
for cladding damage (i.e., white
dusty appearance). If damage has
occurred, cut the damaged
portion of the fiber and repeat
the Strip Outer Jacket procedure.
If the fiber stripper tool blade is
worn, replace the tool
immediately.
Step 4 — Install Ferrule
(Connector)
Slide the ferrule onto the fiber
and into the crimp ring, carefully
aligning the ferrule fully within
the crimp ring. The fiber should
protrude at least 35 mm (1.4 in)
through the end of the ferrule.
Selecting the large hole on the
crimp tool (rear die nest), crimp
the ring to the ferrule by fully
squeezing the crimp tool handles
together and releasing.
Step 5 – Cleave Fiber
Instructions for Step-by-Step
Connector Installation for
HCS Cable
The following step-by-step guide
describes how to terminate hard
clad silica fiber optic cable. It is
ideal for both field and factory
installation. Connectoring the
cable is accomplished with the
Hewlett-Packard HFBR-4521
Crimp and Cleave Kit consisting
of a Cable Stripper Tool, Fiber
Stripper Tool, Crimp Tool, and
Diamond Cleave Tool. No
adhesive material is needed to
secure the cable in the connector,
and the connector can be used
immediately after cleaving. Con-
nectors may be easily installed on
the cable ends with the Crimp
and Cleave Kit.
Materials needed for the
terminating procedure are:
1. Hewlett-Packard HCS Fiber
Optic Cable: (Example: HFBR-
HUS500, HFBR-HUD500,
HFBR-VUS500)
2. HFBR-4584 Crimp and Cleave
Kit
3. HFBR-4521 Black Simplex
Connector and Crimp Ring
(HFBR-4527)
Step 1 – Strip Outer Jacket
The zipcord structure of the
duplex cable permits easy separa-
tion of the channels. The
channels should be separated
approximately 75 mm (3.0 in)
back from the ends to permit
connectoring and cleaving. After
cutting the cable to the desired
length, strip off approximately 75
mm (3 in) of the outer jacket with
the cable stripper tool, selecting
the 1.6 cutting hole labeled on
the cable stripper tool. This is
done by applying a quick
squeezing action to cut the cable
jacket. Remove the cut cable
jacket portion.
Step 2 – Install Crimp Ring
(HFBR-4527) to Fiber
Place the crimp ring over the end
of the cable and rest the larger
end against the unstripped cable
jacket. Selecting the smaller
crimp hole (front die nest), align
the crimp ring in the crimp tool
jaws and fully squeeze the tool
handles together and release.
This crimps the crimp ring to the
fiber buffer.
Step 3 – Strip Buffer
Insert the stripped cable through
the guide hole of the fiber
stripper tool, inserting the crimp
ring until it is fully seated in the
相关PDF资料 |
PDF描述 |
|---|---|
| HFBR-AWD001 | INTERCONNECTION DEVICE |
| HQDP-040-03.75-TBR-SBL-1 | INTERCONNECTION DEVICE |
| HQCD-030-40.00-SPD-SBR-3 | INTERCONNECTION DEVICE |
| HQCD-090-40.00-TPU-TTL-2 | INTERCONNECTION DEVICE |
| HQCD-060-40.00-SBR-SED-1 | INTERCONNECTION DEVICE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HFBR-PMD010 | 制造商:Hewlett Packard Co 功能描述: |
| HFBRPND060 | 制造商:AGI 功能描述:AGILENT S9G2B |
| HFBR-PND060 | 制造商:AGI 功能描述:AGILENT S9G2B |
| HFBR-PUD100 | 功能描述:光纤连接器 100 MTR UNCONN PLAST CABLE RoHS:否 制造商:Molex 产品:Adapters 类型:8 Port with External Shutter 连接器类型:Adapter 模式:Multimode 光纤直径: 颜色:Blue 附件类型:LC Adapter |
| HFBR-PUD100Z | 功能描述:光纤连接器 100 MTR UNCONN PLAST CABLE RoHS RoHS:否 制造商:Molex 产品:Adapters 类型:8 Port with External Shutter 连接器类型:Adapter 模式:Multimode 光纤直径: 颜色:Blue 附件类型:LC Adapter |
发布紧急采购，3分钟左右您将得到回复。