- 您现在的位置：买卖IC网 > PDF目录296100 > HFCT-53D3EM 1 x 9 5V Fiber Optic Transceiver for Fibre Channel/Storage - Extended Shield. Metalized Housing PDF资料下载
参数资料
| 型号： | HFCT-53D3EM |
| 英文描述： | 1 x 9 5V Fiber Optic Transceiver for Fibre Channel/Storage - Extended Shield. Metalized Housing |
| 中文描述： | 1 × 9 5V的光纤收发器的光纤通道/存储-扩展盾。金属化房屋 |
| 文件页数： | 9/16页 |
| 文件大小： | 446K |
| 代理商： | HFCT-53D3EM |
2
The post-amplifier also includes a
Signal Detect circuit which
provides a PECL logic-high output
upon detection of a usable input
optical signal level. This single-
ended PECL output is designed to
drive a standard PECL input
through a 50
W PECL load.
Package and Handling
Instructions
Flammability
The HFBR/HFCT-53D3
transceiver housing is made of
high strength, heat resistant,
chemically resistant, and UL 94V-0
flame retardant plastic.
Recommended Solder and
Wash Process
The HFBR/HFCT-53D3 is
compatible with industry-standard
wave or hand solder processes.
Process plug
This transceiver is supplied with a
process plug (HFBR-5000) for
protection of the optical ports
within the duplex SC connector
receptacle. This process plug
prevents contamination during
wave solder and aqueous rinse as
well as during handling, shipping
and storage. It is made of a high-
temperature, molded sealing
material that can withstand +80°C
and a rinse pressure of 110 lbs
per square inch.
Recommended Solder fluxes
Solder fluxes used with the
HFBR/HFCT-53D3 should be
water-soluble, organic fluxes.
Recommended solder fluxes
include Lonco 3355-11 from
London Chemical West, Inc. of
Burbank, CA, and 100 Flux from
Alpha-Metals of Jersey City, NJ.
Recommended Cleaning/
Degreasing Chemicals
Alcohols
: methyl, isopropyl,
isobutyl.
Aliphatics
: hexane, heptane.
Other:
soap solution, naphtha.
Do not use
partially halogenated
hydrocarbons such as 1,1.1
trichloroethane, ketones such as
MEK, acetone, chloroform, ethyl
acetate, methylene dichloride,
phenol, methylene chloride, or
N-methylpyrolldone. Also, Agilent
does not recommend the use of
cleaners that use halogenated
hydrocarbons because of their
potential environmental harm.
Regulatory Compliance
(See the Regulatory Compliance
Table for transceiver performance)
The overall equipment design will
determine the certification level.
The transceiver performance is
offered as a figure of merit to
assist the designer in considering
their use in equipment designs.
Electrostatic Discharge (ESD)
There are two design cases in
which immunity to ESD damage
is important.
The first case is during handling of
the transceiver prior to mounting it
on the circuit board. It is important
to use normal ESD handling
precautions for ESD sensitive
devices. These precautions
include using grounded wrist
straps, work benches, and floor
mats in ESD controlled areas. The
transceiver performance has been
shown to provide adequate
performance in typical industry
production environments.
The second case to consider is
static discharges to the exterior
of the equipment chassis
containing the transceiver parts.
To the extent that the duplex SC
connector receptacle is exposed
to the outside of the equipment
chassis it may be subject to
whatever system-level ESD test
criteria that the equipment is
intended to meet. The transceiver
performance is more robust than
typical industry equipment
requirements of today.
Electromagnetic Interference
(EMI)
Most equipment designs utilizing
these high-speed transceivers from
Agilent will be required to meet
the requirements of FCC in the
United States, CENELEC
EN55022 (CISPR 22) in Europe
and VCCI in Japan. Refer to EMI
section (page 5) for more details.
Immunity
Equipment utilizing these
transceivers will be subject to
radio-frequency electromagnetic
fields in some environments.
These transceivers have good
immunity to such fields due to
their shielded design.
Eye Safety
These laser-based transceivers
are classified as AEL Class I (U.S.
21 CFR(J) and AEL Class 1 per
EN 60825-1 (+A11). They are eye
safe when used within the data
sheet limits per CDRH. They are
also eye safe under normal
operating conditions and under
all reasonably foreseeable single
fault conditions per EN60825-1.
Agilent has tested the transceiver
design for compliance with the
requirements listed below under
normal operating conditions and
under single fault conditions
where applicable. TUV Rheinland
has granted certification to these
transceivers for laser eye safety
and use in EN 60950 and
EN 60825-2 applications. Their
performance enables the
transceivers to be used without
concern for eye safety up to 7 V
transmitter VCC.
相关PDF资料 |
PDF描述 |
|---|---|
| HFCT-53D3FM | 1 x 9 5V Fiber Optic Transceiver for Fibre Channel/Storage - Flush Shield. Metalized Housing |
| HFCT-53D5EM | 1 x 9 Fiber Optic Transceivers for Gigabit Ethernet |
| HFCT53D3 | FIBER OPTIC TRANSCEIVER |
| HFCT53D3EM | FIBER OPTIC TRANSCEIVER |
| HFCT53D3FM | FIBER OPTIC TRANSCEIVER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HFCT53D3FM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
| HFCT-53D3FM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1 x 9 5V Fiber Optic Transceiver for Fibre Channel/Storage - Flush Shield. Metalized Housing |
| HFCT53D5EM | 制造商:Agilent Technologies 功能描述: |
| HFCT-53D5EM | 功能描述:光纤发射器、接收器、收发器 1300nm 5V GbE 1x9 Tx cvr Ext Shld RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: |
| HFCT-53D5EMZ | 功能描述:光纤发射器、接收器、收发器 1300nm 5V GbE 1x9 Tx cr Ex Sh RoHS RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: |
发布紧急采购，3分钟左右您将得到回复。