参数资料
| 型号： | HI5767/6CB-T |
| 厂商： | Intersil |
| 文件页数： | 6/15页 |
| 文件大小： | 0K |
| 描述： | CONV A/D 10BIT 60MSPS 28-SOIC |
| 标准包装： | 1,000 |
| 位数： | 10 |
| 采样率（每秒）： | 60M |
| 数据接口： | 并联 |
| 转换器数目： | 8 |
| 功率耗散（最大）： | 310mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 28-SOIC W |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 2 个单端，单极；1 个差分，双极 |
14
where:
VCORR = 0.5 dB (Typical).
VCORR adjusts the SINAD, and hence the ENOB, for the
amount the analog input signal is backed off from full scale.
Signal To Noise and Distortion Ratio (SINAD)
SINAD is the ratio of the measured RMS signal to RMS sum
of all the other spectral components below the Nyquist
frequency, fS/2, excluding DC.
Signal To Noise Ratio (SNR)
SNR is the ratio of the measured RMS signal to RMS noise at
a specified input and sampling frequency. The noise is the
RMS sum of all of the spectral components below fS/2
excluding the fundamental, the first five harmonics and DC.
Total Harmonic Distortion (THD)
THD is the ratio of the RMS sum of the first 5 harmonic
components to the RMS value of the fundamental input signal.
2nd and 3rd Harmonic Distortion
This is the ratio of the RMS value of the applicable harmonic
component to the RMS value of the fundamental input signal.
Spurious Free Dynamic Range (SFDR)
SFDR is the ratio of the fundamental RMS amplitude to the
RMS amplitude of the next largest spectral component in the
spectrum below fS/2.
Intermodulation Distortion (IMD)
Nonlinearities in the signal path will tend to generate
intermodulation products when two tones, f1 and f2, are
present at the inputs. The ratio of the measured signal to the
distortion terms is calculated. The terms included in the
calculation are (f1+f2), (f1-f2), (2f1), (2f2), (2f1+f2), (2f1-f2),
(f1+2f2), (f1-2f2). The ADC is tested with each tone 6dB
below full scale.
Transient Response
Transient response is measured by providing a full-scale
transition to the analog input of the ADC and measuring the
number of cycles it takes for the output code to settle within
10-bit accuracy.
Over-Voltage Recovery
Over-Voltage Recovery is measured by providing a full-scale
transition to the analog input of the ADC which overdrives
the input by 200mV, and measuring the number of cycles it
takes for the output code to settle within 10-bit accuracy.
Full Power Input Bandwidth (FPBW)
Full power input bandwidth is the analog input frequency at
which the amplitude of the digitally reconstructed output has
decreased 3dB below the amplitude of the input sine wave.
The input sine wave has an amplitude which swings from
-FS to +FS. The bandwidth given is measured at the
specified sampling frequency.
HI5767
相关PDF资料 |
PDF描述 |
|---|---|
| V375C12M150BF3 | CONVERTER MOD DC/DC 12V 150W |
| MC100EP16VBDTG | IC RCVR/DRVR ECL DIFF 5V 8TSSOP |
| MS27656E13B22PB | CONN RCPT 22POS WALL MNT W/PINS |
| V375C12M150BF | CONVERTER MOD DC/DC 12V 150W |
| HI5767/6CB | CONV A/D 10BIT 60MSPS 28-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HI5767EVAL1 | 功能描述:数据转换 IC 开发工具 HI5767 LW FREQUENCY EVALUATION PLATFORM RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| HI5767EVAL2 | 功能描述:数据转换 IC 开发工具 HI5767 HI FREQUENCY EVALUATION PLATFORM RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| HI5780 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:10-Bit, 80 MSPS, High Speed, Low Power D/A Converter |
| HI5780-EV | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:10-Bit, 80 MSPS, High Speed, Low Power D/A Converter |
| HI5780JCQ | 制造商:Rochester Electronics LLC 功能描述:32 PQFP COMTEMP VIDEO D/A 10BIT 80MHZ - Bulk 制造商:Harris Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。