- 您现在的位置：买卖IC网 > PDF目录21621 > HJ2-AC200V (Panasonic Electric Works)RELAY GEN PURPOSE DPDT 7A 200V PDF资料下载
参数资料
| 型号： | HJ2-AC200V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 8/8页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE DPDT 7A 200V |
| 其它有关文件： | General Appl Guidelines Standards Chart |
| 标准包装： | 20 |
| 系列： | HJ |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 6.7mA |
| 线圈电压： | 200VAC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 7A |
| 切换电压： | 250VAC，125VDC - 最小值 |
| 关闭电压（最大）： | 160 VAC |
| 关闭电压（最小）： | 60 VAC |
| 安装类型： | 可插 |
| 端接类型： | 插入式 |
| 包装： | 散装 |
| 触点材料： | 银（Ag） |
| 操作时间： | 20ms |
| 释放时间： | 20ms |
| 线圈功率： | 1.3 VA |
| 工作温度： | -40°C ~ 70°C |
| 相关产品： | 255-1838-ND - SOCKET TERM 2CHAN FOR HJ2 RELAYS |
HJ
NOTES
1. Coil applied voltage
Please refer to “RATING” about coil input
power supply.
2. LED display
Operation is displayed by the light
emitted from the LED. The LED may
remain brie?y lit if voltage remains after
the relay opens.
3. Switching lifetime
The switching lifetime is de?ned under
the standard test condition speci?ed in
the JIS* C 5442 standard (temperature
15 to 35 ° C 59 to 95 ° F , humidity 25 to
75%). Check this with the real device as it
is affected by coil driving circuit, load
type, activation frequency, activation
phase,ambient conditions and other
factors.
Also, be especially careful of loads such
4. Usage, transport and storage
conditions
1) Temperature, humidity and pressure
during usage, storage and transport
(1) Temperature:
–40 to +70 ° C –40 to +158 ° F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
Temperature and humidity range for
usage, transport, and storage
Humidity, %R.H.
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
5. Operation method for test button
1) Push and release 1 gently to con?rm
relay switching.
1
Release
Push
2) To lock to one side turn 90 ° counter-
clockwise while pushing lock and turn 90 °
clockwise to release.
For Lock For Release
as those listed below.
1) When used for AC load-operating and
the operating phase is synchronous.
temperatures
lower than
0 ° C 32 ° F )
5
when used at
temperatures
higher than
0 ° C 32 ° F )
Rocking and fusing can easily occur due
to contact shifting.
–40
–40
0
+32
Temperature, ° C ° F
70
+158
2) High-frequency load-operating
When high-frequency opening and
(3) Atmospheric pressure: 86 to 106 kPa
closing of the relay is performed with a
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO 3 is formed. This
can corrode metal materials.
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
3) Do not use the test button for anything
other than testing, such as when
checking the circuit.
6. Diode characteristics
1) Reverse breakdown voltage: 1,000 V
Three countermeasures for these are
deterioration of the relay insulation.
2) Forward current:
1A
listed here.
(1) Incorporate an arc-extinguishing
circuit.
(2) Lower the operating frequency
(3) Lower the ambient humidity
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0 ° C 32 ° F . This
causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
7. Diode and CR built-in type
Since the diode and CR inside the relay
coil are designed to absorb the counter
emf, the element may be damaged if a
large surge, etc., is applied to the diode
and CR. If there is the possibility of a
large surge voltage from the outside,
please implement measures to absorb it.
8. Please connect DC coil types with
LED and built-in diode correctly by
verifying the coil polarity (“+” and “–
”). Connecting with reverse polarity
will cause the LED not to light and
damage the built-in diode due to its
speci?cation.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB6E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| HJ2-AC240V | RELAY GEN PURPOSE DPDT 7A 240V |
| G4W-1112P-VD-TV8 DC12 | RELAY GEN PURPOSE SPST 15A 12V |
| G6B-2114C-US DC6 | RELAY GENERAL PURPOSE DPST 5A 6V |
| AHN221X1 | RELAY GEN PURPOSE DPDT 5A 110V |
| AHN221X0 | RELAY GEN PURPOSE DPDT 5A 100V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HJ2-AC240V | 功能描述:通用继电器 2 Form C 240VAC Mini Relay Plug-In RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| HJ2-AC24V | 功能描述:通用继电器 2 Form C 24VAC Mini Relay Plug-In RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| HJ2-AC48V | 功能描述:通用继电器 2 Form C 48VAC Mini Relay Plug-In RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| HJ2-DC110V | 功能描述:通用继电器 2 Form C 100/110VDC Mini Relay Plug-In RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| HJ2-DC12V | 功能描述:通用继电器 2 Form C 12VDC Mini Relay Plug-In RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
发布紧急采购，3分钟左右您将得到回复。