- 您现在的位置：买卖IC网 > PDF目录17138 > HL021R0BTTR (AVX Corporation)INDUCTOR 1NH 346MA 0402 PDF资料下载
参数资料
| 型号： | HL021R0BTTR |
| 厂商： | AVX Corporation |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR 1NH 346MA 0402 |
| 产品培训模块： | MLO Inductor |
| 特色产品： | MLO Organic Inductors |
| 标准包装： | 1 |
| 系列： | MLO™ |
| 电感： | 1nH |
| 电流： | 346mA |
| 容差： | ±0.1nH |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 最大 95 毫欧 |
| Q因子@频率： | 25 @ 450MHz |
| 频率 - 自谐振： | 18.3GHz |
| 封装/外壳： | 0402（1005 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 工作温度： | -55°C ~ 125°C |
| 频率 - 测试： | 450MHz |
| 其它名称： | 478-6906-6 |
MLO TM Inductors
AUTOMATED SMT ASSEMBLY
The following section describes the guidelines for automated
SMT assembly of MLO TM RF devices which are typically Land
Grid Array (LGA) packages or side termination SMT packages.
Control of solder and solder paste volume is critical for
surface mount assembly of MLO TM RF devices onto the PCB.
SMT REFLOW PROFILE
Common IR or convection reflow SMT processes shall be
used for the assembly. Standard SMT reflow profiles, for
eutectic and Pb free solders, can be used to surface mount
the MLO TM devices onto the PCB. In all cases, a temperature
gradient of 3°C/sec, or less, should be maintained to prevent
warpage of the package and to ensure that all joints reflow
properly. Additional soak time and slower preheating time
Stencil thickness and aperture openings should be adjusted
according to the optimal solder volume. The following are
general recommendations for SMT mounting of MLO TM
devices onto the PCB.
may be required to improve the out-gassing of solder paste.
In addition, the reflow profile depends on the PCB density
and the type of solder paste used. Standard no-clean solder
paste is generally recommended. If another type of flux is
used, complete removal of flux residual may be necessary.
Example of a typical lead free reflow profile is shown below.
Tp
T L
Ts max
Ramp-up
tp
t L
Critical Zone
T L to Tp
Ts min
ts
Preheat
Ramp-down
25
t 25oC to Peak
Time
Figure A. Typical Lead Free Profile and Parameters
Profile Parameter
Ramp-up rate (Tsmax to Tp
Preheat temperature (Ts min to Ts max)
Preheat time (ts)
Time above T L , 217oC (t L )
Peak temperature (Tp)
Time within 5oC of peak temperature (tp)
Ramp-down rate
Time 25oC to peak temperature
Pb free, Convection, IR/Convection
3oC/second max.
150oC to 200oC
60 – 180 seconds
60 – 120 seconds
260°C
10 – 20 seconds
4oC/second max.
6 minutes max.
101
7
相关PDF资料 |
PDF描述 |
|---|---|
| EEC36DRTN-S13 | CONN EDGECARD 72POS .100 EXTEND |
| NC-064064-25-9 | LABEL ID PRODUCT |
| EMC06DRTI-S13 | CONN EDGECARD 12POS .100 EXTEND |
| NC-095095-10-9 | LABEL ID PRODUCT |
| EEC36DRTH-S13 | CONN EDGECARD 72POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HL021R1BTTR | 功能描述:固定电感器 1.1 nH +/- 0.1 nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| HL021R2BTTR | 功能描述:固定电感器 1.2 nH +/- 0.1 nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| HL021R3BTTR | 功能描述:固定电感器 1.3 nH +/- 0.1 nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| HL021R5BTTR | 功能描述:固定电感器 1.5 nH +/- 0.1 nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| HL021R6BTTR | 功能描述:固定电感器 1.6 nH +/- 0.1 nH RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
发布紧急采购，3分钟左右您将得到回复。