参数资料
| 型号： | HLE-132-02-G-DV-BE-A |
| 厂商： | Samtec Inc |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | CONN RCPT 64POS .100" SMD GLD |
| 标准包装： | 1 |
| 系列： | HLE |
| 连接器类型： | 插座，底部进入 |
| 位置数： | 64 |
| 加载位置的数目： | 全部 |
| 间距： | 0.100"（2.54mm） |
| 行数： | 2 |
| 行间距： | 0.100"（2.54mm） |
| 板上方高度： | 0.138"（3.50mm） |
| 安装类型： | 表面贴装 |
| 端子： | 焊接 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 20µin（0.51µm） |
| 特点： | 板导轨 |
| 颜色： | 黑 |
| 包装： | 管件 |
| 配套产品： | TSW-132-18-L-D-ND - CONN HEADER 64POS .100" DBL TSW-132-07-S-D-020-ND - CONN HEADER 64POS .100" DBL TSW-132-07-G-D-LL-ND - CONN HEADER 64POS .100" DBL TSW-132-07-F-D-ND - CONN HEADER 64POS .100" DBL TSM-132-01-S-DV-LC-ND - CONN HEADER 64POS .100" DBL SMD MTSW-132-09-S-D-470-ND - CONN HEADER 64POS .100" DUAL MTSW-132-09-S-D-360-ND - CONN HEADER 64POS .100" DUAL MTSW-132-08-G-D-340-ND - CONN HEADER 64POS .100" DUAL MTSW-132-07-G-D-240-ND - CONN HEADER 64POS .100" DUAL SAM1097-32-ND - CONN HEADER .100" 64POS DUAL TIN 更多... |
REVISION AQ
HLE-1XX-02-XXX-DV-XX-XX-XX
DO NOT
SCALE FROM
THIS PRINT
FIG 5
No OF POSITIONS
-02 THRU -50
(PER ROW)
OPTION
-TR: TAPE & REEL
(2 - 29 POSITIONS ONLY)
OPTION
No OF POS x .100 [2.54]
2 MAX SWAY
(USE C-132-12-L)
-H: 30μ" HEAVY GOLD IN CONTACT AREA
3μ" ON TAIL (USE C-132-12-H)
.100 2.54
REF
-BE OPTION
(SAME AS FIG 1 UNLESS OTHERWISE STATED)
C
+.008 [.20]
-.005 [.13]
({No of POS - 1} x .100 [2.54])
.005 [.13]
C-132-12-XXX
(EITHER DIRECTION)
.020 0.51 REF
RHLE-50-D
SEE NOTE 10
"A"
02
01
RHLE-50-DBE LEAD STYLE
-02: SURFACE MOUNT
(USE C-132-12-X)
PLATING SPECIFICATION
-G: 20μ" GOLD IN CONTACT AREA
3μ" ON TAIL (USE C-132-12-G)
-S: 30μ" SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(USE C-132-12-S)
-F: 3μ" SELECTIVE FLASH GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(USE C-132-12-F)
-L: 10μ" SELECTIVE LIGHT GOLD IN
CONTACT AREA MATTE TIN ON TAIL
.200 5.08
REF
-STL: 30μ" SELECTIVE GOLD IN CONTACT
AREA TIN/LEAD (90%/10 +/-5%)
(USE C-132-12-STL)
-SM: 30μ" SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
(USE C-132-12-S)
-FM: 3μ" SELECTIVE FLASH GOLD IN CONTACT
AREA MATTE TIN ON TAIL (USE C-132-12-F)
-LM: 10μ" LIGHT GOLD IN CONTACT AREA
MATTE TIN ON TAIL (USE C-132-12-L)
.259 6.58 REF
90°±3°
C
.144 3.66
-P: PICK & PLACE PAD
(POS -03 THRU -50 ONLY)
-A: ALIGNMENT PIN (4 POS MIN)
-LC: LOCKING CLIP (2 POS MIN)
(SEE NOTE 9)
-K: USE K-DOT-.256-.375-.005
POLYAMIDE FILM PAD (AVAILABLE
ON POS -03 THRU -50; .005 [.13]
THICKNESS)
(SEE FIG 4)
OPTION
-BE: BOTTOM ENTRY
(USE RHLE-50-DBE)(SEE FIG. 5)
(LEAVE BLANK FOR STANDARD)
ROW SPECIFICATION
-DV: DOUBLE VERTICAL
(USE RHLE-50-D)
PATENT NUMBERS
5713755 / 5961339
C
SEE TABLE 2
"A"
FIG 1
HLE-116-02-XXX-DV SHOWN
FIG 2
-A & -LC OPTION
.050 1.27
(No OF POS -2) x.1000 [2.540] C
SECTION "A"-"A"
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION.
2. ALL IDENTIFICATION MARKS MUST NOT STAND GREATER THAN .002 [.05]
OFF THE SURFACE OF THE PART.
3. PULL OUT FORCE FOR -LC, -A, & CONTACT IS 12 oz MIN.
4. COPLANARITY: SEE TABLE 2.
5. BURR ALLOWANCE: .003 [.08] MAX
6. CUT ASSEMBLIES AFTER FILL. CUT FLASH TO BE .010 MAX WITH NO FLASH
ALLOWED IN HOLES OR EXTENDING BELOW LEADS. WILL LOSE A POSITION
FOR EVERY CUT MADE ON A SOCKET STRIP.
7. TUBE POSITIONS 03 THRU 50. LAYER PACKAGE POSITION 02.
8. ENDWALL THICKNESS: .030+/-.005[.76+/-.13] TO BE MEASURED FROM BOTTOM VIEW.
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
10. SAMTEC LOGO MAY NOT BE PRESENT ON CUT TO POSITION CONNECTORS.
C
.050 1.27
TOLERANCES ARE:
.XX: .01 [.3] 3
.XXX: .005 [.13]
.XXXX: .0020 [.051]
.008 x .056 REF
[.20 x 1.42]
3 MAX SWAY
(EITHER DIRECTION)
LC-08-TM-01
SM-A10H
.0625 1.588
3 MAX SWAY
(EITHER DIRECTION)
UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE
DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1
BODY: VECTRA E130i
CONTACT: BeCu
F:\DWG\MISC\MKTG\HLE-1XX-02-XXX-DV-XX-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
DESCRIPTION:
[2.54] .100 TIGER BEAM SOCKET ASSEMBLY
DWG. NO.
HLE-1XX-02-XXX-DV-XX-XX-XX
SHEET 1 OF 2
ED MESSER 12/19/98
BY:
相关PDF资料 |
PDF描述 |
|---|---|
| 89883-336LF | CONN RCPT 72POS .100 DBL R/A PCB |
| SDL-136-TT-12 | CONN RCPT .100" 72POS DUAL TIN |
| 1-292227-7 | CONN HEADER 17POS R/A SMD TIN |
| 68682-350LF | CONN RCPT 100POS .1" DUAL ENTRY |
| 68682-344LF | CONN RCPT 88POS .100" DUAL ENTRY |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HLE-132-02-G-DV-BE-A-K | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 64 POS 2.54MM SLDR ST SMD - Bulk |
| HLE-132-02-G-DV-BE-A-P | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 64 POS 2.54MM SLDR ST SMD - Bulk |
| HLE-132-02-H-DV | 制造商:Samtec Inc 功能描述:.100 TIGER BEAM SOCKET ASSEMBLY - Bulk |
| HLE-132-02-L-DV | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 64 POS 2.54MM SLDR ST SMD - Bulk 制造商:Samtec Inc 功能描述:SOCKET, 2.54MM, SMT, 2X32WAY 制造商:Samtec Inc 功能描述:SOCKET, 2.54MM, SMT, 2X32POS, Series:HLE, Pitch Spacing:2.54mm, No. of Rows:2, N |
| HLE-132-02-S-DV-A | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 64 POS 2.54MM SLDR ST SMD - Bulk |
发布紧急采购，3分钟左右您将得到回复。