- 您现在的位置：买卖IC网 > PDF目录18812 > HMC1052L-TR (Honeywell Microelectronics & Precision Sensors)SENSOR MAGNETIC 2-AXIS 16-LCC PDF资料下载
参数资料
| 型号： | HMC1052L-TR |
| 厂商： | Honeywell Microelectronics & Precision Sensors |
| 文件页数： | 6/11页 |
| 文件大小： | 656K |
| 描述： | SENSOR MAGNETIC 2-AXIS 16-LCC |
| 产品培训模块： | Magnetic Sensors |
| 标准包装： | 3,000 |
| 传感范围： | ±6g |
| 类型： | 线性 |
| 电源电压： | 1.8 V ~ 20 V |
| 输出类型： | 差分电压 |
| 特点： | 罗盘 - 双轴 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 16-LCC 裸露焊盘（无引线） |
| 供应商设备封装： | 16-LCC |
| 包装： | 剪切带 (CT) |
| 其它名称： | 342-1034 342-1034-ND 342-1042-1 342-1042-5 342-1042-5-ND HMC1052L |
HMC1051/HMC1052/HMC1053
6 www.honeywell.com
HMC105X parts may be reworked with soldering irons, but extreme care must be taken not to overheat the copper pads
(must not exceed maximum device reflow temperatures) from the parts fiberglass substrate. Irons with a tip temperature
no greater than 315癈 should be used. Excessive rework risks the copper pads pulling away into the molten solder.
DEVICE OPERATION
The Honeywell HMC105X family of magnetoresistive sensors are Wheatstone bridge devices to measure magnetic fields.
With power supply applied to a bridge, the sensor converts any incident magnetic field in the sensitive axis direction to a
differential voltage output. In addition to the bridge circuit, the sensor has two on-chip magnetically coupled straps; the
offset strap and the set/reset strap. These straps are Honeywell patented features for incident field adjustment and
magnetic domain alignment; and eliminate the need for external coils positioned around the sensors.
The magnetoresistive sensors are made of a nickel-iron (Permalloy) thin-film deposited on a silicon wafer and patterned
as a resistive strip element. In the presence of a magnetic field, a change in the bridge resistive elements causes a
corresponding change in voltage across the bridge outputs.
These resistive elements are aligned together to have a common sensitive axis (indicated by arrows on the pinouts) that
will provide positive voltage change with magnetic fields increasing in the sensitive direction. Because the output only is in
proportion to the one-dimensional axis (the principle of anisotropy) and its magnitude, additional sensor bridges placed at
orthogonal directions permit accurate measurement of arbitrary field direction. The combination of sensor bridges in two
and three orthogonal axis permit applications such as compassing and magnetometry.
The offset strap allows for several modes of operation when a direct current is driven through it. These modes are: 1)
Subtraction (bucking) of an unwanted external magnetic field, 2) null-ing of the bridge offset voltage, 3) Closed loop field
cancellation, and 4) Auto-calibration of bridge gain.
The set/reset strap can be pulsed with high currents for the following benefits: 1) Enable the sensor to perform high
sensitivity measurements, 2) Flip the polarity of the bridge output voltage, and 3) Periodically used to improve linearity,
lower cross-axis effects, and temperature effects.
NOISE CHARACTERISTICS
The noise density for the HMR105X series is around 50nV/sqrt Hz at the 1 Hz corner, and quickly drops below 10nV/sqrt
Hz at 5Hz and begins to fit the Johnson Noise value at just below 5nV/sqrt Hz beyond 50Hz. The 10Hz noise voltage
averages around 1.4 micro-volts with a 0.8 micro-volts standard deviation.
CROSS-AXIS EFFECT
Cross-Axis effect for the HMR105X series is typically specified at ?% of full scale to 1 gauss. See application note
AN215 regarding this effect and methods for nulling.
OFFSET STRAP
The offset strap is a spiral of metalization that couples in the sensor elements sensitive axis. In two-axis designs, the
strap is common to both bridges and must be multiplexed if each bridge requires a different strap current. In three-axis
designs, the A and B bridges are together with the C bridge sharing a common node for series driving all three bridges
offset straps. Each offset strap measures nominally 15 ohms, and requires 10mA for each gauss of induced field. The
straps will easily handle currents to buck or boost fields through the ? gauss linear measurement range, but designers
should note the extreme thermal heating on the die when doing so.
With most applications, the offset strap is not utilized and can be ignored. Designers can leave one or both strap
connections (Off- and Off+) open circuited, or ground one connection node. Do not tie both strap connections together to
avoid shorted turn magnetic circuits.
SET/RESET STRAP
The set/reset strap is another spiral of metallization that couples to the sensor elements easy axis (perpendicular to the
sensitive axis on the sensor die). Like the offset strap, the set/reset strap runs through a pair of bridge elements to keep
the overall die size compact. Each set/reset strap has a nominal resistance of 3 to 6 ohms with a minimum required peak
相关PDF资料 |
PDF描述 |
|---|---|
| PD431607 | SCR MODULE ISO DUAL 1600V 700A |
| HM41-11010LF | TRANSFORMER GATE DRV MAGN TOROID |
| D2MV-1L22-1C3 | SWITCH MINI SPST-NO 1A SOLDER |
| PS431215 | SCR MODULE SGL 1200V 1500A |
| 633W-48 BLK | LEAD TEST MINIHK-RA BANAPLG BLK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMC1052T/R | 制造商:HONEYWELL 制造商全称:Honeywell Solid State Electronics Center 功能描述:1, 2 and 3 Axis Magnetic Sensors |
| HMC1053 | 功能描述:SENSOR MAGNETIC 3-AXIS 16-PLCC RoHS:否 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| HMC1055 | 功能描述:KIT COMPASS SENSOR 3-AXIS RoHS:否 类别:套件 >> 传感器 系列:- 标准包装:1 系列:- 套件类型:气体传感器 值:27929，27930，27931，27932 包装:纸板盒 |
| HMC1055LP2CE | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:Automotive Telematics |
| HMC1055LP2CETR | 制造商:Hittite Microwave Corp 功能描述:IC MMIC SW SPST GAAS 8DFN |
发布紧急采购，3分钟左右您将得到回复。