- 您现在的位置：买卖IC网 > PDF目录60835 > HMC204 (HITTITE MICROWAVE CORP) 4000 MHz - 8000 MHz RF/MICROWAVE FREQUENCY DOUBLER, 21 dB CONVERSION LOSS-MAX PDF资料下载
参数资料
| 型号： | HMC204 |
| 厂商： | HITTITE MICROWAVE CORP |
| 元件分类： | 倍频器 |
| 英文描述： | 4000 MHz - 8000 MHz RF/MICROWAVE FREQUENCY DOUBLER, 21 dB CONVERSION LOSS-MAX |
| 封装： | MINIATURE, DIE |
| 文件页数： | 6/6页 |
| 文件大小： | 165K |
| 代理商： | HMC204 |
F
R
E
Q
U
E
NC
Y
MU
L
T
IP
L
IE
R
S
-
P
A
S
IV
E
-
C
H
IP
2
2 - 15
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD
protective bag for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry
nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning sys-
tems.
Static Sensitivity: Follow ESD precautions to protect against ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias
cables to minimize inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The
surface of the chip may have fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive
epoxy. The mounting surface should be clean and flat.
Epoxy Die Attach:
Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the perim-
eter of the chip once it is placed into position.
Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 1.0 diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of
150 °C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use
the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and
terminated on the package. RF bonds should be as short as possible.
HMC204
v04.0907
GaAs MMIC PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
相关PDF资料 |
PDF描述 |
|---|---|
| HMC214MS8 | 2400 MHz - 4000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 12 dB CONVERSION LOSS-MAX |
| HMC216MS8RTR | RF/MICROWAVE DOUBLE BALANCED MIXER |
| HMC216MS8TR | RF/MICROWAVE DOUBLE BALANCED MIXER |
| HMC218MS8E | 4500 MHz - 6000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 9.5 dB CONVERSION LOSS-MAX |
| HMC219AMS8E | 4500 MHz - 9000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 10 dB CONVERSION LOSS-MAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMC204_08 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204_09 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204C8 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204C8_06 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204C8_08 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
发布紧急采购，3分钟左右您将得到回复。