- 您现在的位置：买卖IC网 > PDF目录18822 > HMR2300-D20-485 (Honeywell Microelectronics & Precision Sensors)MAGNETOMETER RS485 W/CASE PDF资料下载
参数资料
| 型号： | HMR2300-D20-485 |
| 厂商： | Honeywell Microelectronics & Precision Sensors |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | MAGNETOMETER RS485 W/CASE |
| 产品培训模块： | Magnetic Sensors |
| 标准包装： | 1 |
| 系列： | HMR |
| 轴： | X，Y，Z |
| 测量范围： | ±2 高斯 |
| 用于测量： | 磁场强度，方向 |
| 分辨率： | 67 µ高斯 |
| 类型： | 数字磁力计 |
| 封装/外壳： | 带外壳的模块 |
| 接口： | RS-232，RS-485 |
| 配用： | 342-1012-ND - KIT DEVELOP MAGNETOMETER RS232 |
| 其它名称： | 342-1018 |
HMR2300
DEVICE ID
The Device ID command (*ddID=nn) will change the HMR2300 ID number. A Write Enable (*ddWE) command is required
before the device ID can be changed. This is required for RS-485 operation when more than one HMR2300 is on a
network. A Device ID = 99 is universal and will simultaneously talk to all units on a network.
BAUD RATE COMMAND
The Baud Rate command (*dd!BR=F or S) will change the HMR2300 baud rate to either fast (19,200 baud) or slow (9600
baud). A Write Enable (*ddWE) command is required before the baud rate can be changed. The last response after this
command has been accepted will be either BAUD=9600 or BAUD=19,200. This will indicate to the user to change to the
identified new baud rate before communications can resume.
ZERO READING COMMAND
The Zero Reading command (*ddZN) will take a magnetic reading and store it in the HMR2300’s mic rocontroller. This
value will be subtracted from subsequent readings as an offset. The zero reading will be terminated with another
command input(*ddZF) or a power down condition. This feature is useful for setting a reference attitude or nulling the
earth ’s field before anomaly detection.
SET/RESET AND AVERAGE COMMANDS
The set-reset function generates a current/magnetic field pulse to each sensor to realign the permalloy thin film
magnetization. This yields the maximum output sensitivity for magnetic sensing. This pulse is generated inside the
HMR2300 and consumes less than 1mA typically. The Set/Reset Mode command (*ddTN or *ddT) activates an internal
switching circuit that flips the current in a “Set” and “Reset” condition. This cancels out any temperat ure drift effects and
ensures the sensors are operating in their most sensitive region.
Fluctuations in the magnetic readings can be reduced by using the Average Readings commands (*ddVN or *ddV). These
commands provide a low pass filter effect on the output readings that reduces noise due to Set/Reset switching and other
environmental magnetic effects. The two figures below show the average readings effect for step and impulse responses.
Switching the set-reset state is not required to sense magnetic fields. A single Set (or Reset) pulse will maximize the
output sensitivity and it will stay that way for months or years. To turn off the internal switching, enter the command *ddTF
or *ddT. In this state the sensors are either in a Set or Reset mode. If the HMR2300 is exposed to a large magnetic field
(>10 gauss), then another set pulse is required to maximize output sensitivity.
In the Set mode, the direction of the sensitive axis’ are shown on the enclosure label and the board dimensions figure. In
the Reset mode, the sensitive field directions are opposite to those shown. By typing *dd], the user can manually activate
a Set or Reset pulse. The S/R pulse commands can be used the continuous read mode to flip between a Set and Reset
state. Note that the first three readings immediately after these commands will be invalid due to the uncertainty of the
current pulse to the sensor sample time.
DEFAULT AND RESTORE COMMANDS
The Defaut Settings command (*ddD) will force the HMR2300 to all the default parameters. This will not be a permanent
change unless a Store Parameter command (*ddSP) is issued after the Write Enable command. The Restore Settings
command (*ddRST) will force the HMR2300 to all the stored parameters in the EEPROM.
www.honeywell.com
9
相关PDF资料 |
PDF描述 |
|---|---|
| PT080-60-0 | CORD PATCH PIN TIP PLUG 60" BLK |
| ISL5829/2INZ | IC DAC 12BIT CMOS DUAL 48LQFP |
| HMR2300-D00-485 | MAGNETOMETER RS485 |
| PT080-48-2 | CORD PATCH PIN TIP PLUG 48" RED |
| ISL5829INZ | IC CONV DUAL 12BIT 3.3V 48-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMR2300-D21-232 | 功能描述:MAGNETOMETER RS232 W/CASE RoHS:否 类别:传感器，转换器 >> 磁性 - 罗盘，磁场（模块） 系列:HMR 标准包装:490 系列:- 轴:X，Y，Z 测量范围:±1.3 ~ 8.1高斯，±2，4，8高斯 用于测量:制导，间距和卷 分辨率:8 毫高斯 类型:数字罗盘 封装/外壳:28-VFLGA 接口:I²C 配用:497-10689-ND - BOARD ADAPTER LSM303DLH DIL24 其它名称:497-10474 |
| HMR2300-D21-232-DEMO | 功能描述:KIT DEVELOP MAGNETOMETER RS232 RoHS:否 类别:编程器，开发系统 >> 评估板 - 传感器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| HMR2300-D21-485 | 功能描述:MAGNETOMETER RS485 W/CASE RoHS:否 类别:传感器，转换器 >> 磁性 - 罗盘，磁场（模块） 系列:HMR 标准包装:490 系列:- 轴:X，Y，Z 测量范围:±1.3 ~ 8.1高斯，±2，4，8高斯 用于测量:制导，间距和卷 分辨率:8 毫高斯 类型:数字罗盘 封装/外壳:28-VFLGA 接口:I²C 配用:497-10689-ND - BOARD ADAPTER LSM303DLH DIL24 其它名称:497-10474 |
| HMR2300R | 制造商:HONEYWELL 制造商全称:Honeywell Solid State Electronics Center 功能描述:THREE-AXIS STRAPDOWN MAGNETOMETER |
| HMR2300R (422) | 制造商:Honeywell SSEC 功能描述:Three Axis Strapdown Magnetometer |
发布紧急采购，3分钟左右您将得到回复。