- 您现在的位置：买卖IC网 > PDF目录18833 > HMS 10-P (LEM USA Inc)SENSOR CURRENT 10A 5V UNI SMD PDF资料下载
参数资料
| 型号： | HMS 10-P |
| 厂商： | LEM USA Inc |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | SENSOR CURRENT 10A 5V UNI SMD |
| 产品培训模块： | HMS Series Open Loop Surface Mount Current Transducers |
| 标准包装： | 1 |
| 系列： | HMS |
| 电流 - 感应： | 10A |
| 精确度： | ±1% |
| 电流 - 电源： | 19mA |
| 传感器类型： | 开环霍尔效应 |
| 电源电压： | 5V |
| 频率： | 50kHz |
| 响应时间： | 5µs |
| 电极标记： | 双向 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 圆形 - 0.02"（0.51mm） |
| 包装： | 标准包装 |
| 其它名称： | 398-1059-6 |
Current Transducer HMS 5..20-P
Handling Instructions
Notes for Storage, Handling and Mounting the transducer
Storage
( 1) General storage conditions: Temperature 5 .. 30 °C Humidity 40 .. 60 %RH without dew condensation
( 2) Storage period:
Storage period is within 1 year after production date in general storage conditions with dry pack dessicant.
According to MSL1 (Moisture Sensitivity Level 1) requirement.
( 3) Containers must prevent electric static charge build up.
N ote. For over storage periods of 1 year, the customer shall confirm the solderability of the part.
Handling and Mounting
( 1) Do not expose the transducer to shock or vibration.
Damage caused by shock or vibration can lead to a failure of the transducer.
( 2) Do not wash the transducer.
The HMS is a non-sealed type transducer. If liquids reach inside the transducer, it will cause migration or corrosion, which will
influence the performance.
( 3) Thickness of the PCB should be more than 1.5 mm.
If the thickness is not enough, the PCB tends to warp. It makes excessive tension on the transducer, which will influence the
dynamic characteristics.
( 4) Be aware of the chucking force when mounting the transducer.
When you use a machine for mounting the HMS transducer, make sure the chucking force is not too much because
excessive force could cause damage to the parts inside the case, which will influence the dynamic characteristics of the
transducer. Chucking force should not exceed 3 times the weight of the transducer.
( 5) Do not touch the lead pins with bare hands after they are taken out of the reel.
Lead pins of HMS are Pb free parts. If the pins are touched by bare hands, they will oxidize faster, and that could cause
soldering problems.
Do not use HMS transducer other than measuring current.
Page 4/6
110512/13
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
www.lem.com
相关PDF资料 |
PDF描述 |
|---|---|
| 6576-24-0 | CORD ALLIG-ALLIG W/BOOT 24" BLK |
| HMS 15-P | SENSOR CURRENT 15A 5V UNI SMD |
| HMS 20-P | SENSOR CURRENT 20A 5V UNI SMD |
| AL-B-60-3 | CORD ALLIG CLIP PATCH 60" ORANGE |
| CR45-W | CURRENT INDICATOR WHT WIRE MNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMS11 | 功能描述:控制开关 Auxiliary Switch for MS series;1n.o.,1n.c.contact,cULuslisted RoHS:否 制造商:Omron Industrial 控制类型:Emergency Stop 触点额定值:5 A at 125 VAC 触点形式:1 Form B (SPST-NC) 电压额定值: 电流额定值: 执行器:Pushbutton 照明:N 安装风格: |
| HMS1101S01M | 制造商:TE Connectivity 功能描述: |
| HMS1101S01P | 制造商:TE Connectivity 功能描述: |
| HMS1101S02L | 制造商:TE Connectivity 功能描述: |
| HMS1101S02M | 制造商:TE Connectivity 功能描述: |
发布紧急采购，3分钟左右您将得到回复。