参数资料
型号: HNC2-2.5P-10DSL
元件分类: 电路板相叠连接器
英文描述: 10 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
文件页数: 7/7页
文件大小: 254K
代理商: HNC2-2.5P-10DSL
B145
BPrecautions
1. Recommended Soldering Condition
Flow: 250 for 3 seconds
Manual soldering: 290 for 2 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
3. Connection Condition
Refer to Nylon Connector Use Hand book.
qExtracting Crimping Contact
To extract the crimping contact from the socket housing, observe the following extraction
procedures.
sExtraction Tool
Tool Name: DF-C-PO(550-0177-7) can be used.
(1) Extraction Method
As shown below in the figure, slightly pull the cable in the state where the DF1 extraction
tool tip or the 0.5 to 0.7mm board has been inserted in the lance fixed slot, the contact can
be easily removed.
Note: If the lance is pressed excessively, the contact body may be deformed, which could
result in contact failure. Therefore, be careful not to press the lance excessively.
(2) How to Adjust the Lance (Raise)
To re-insert the terminal which is removed from the socket housing, use a sharp edge
blade to raise the lance as shown below in the illustration, and then insert the contact.
Note: Lance regeneration is effective only once.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
相关PDF资料
PDF描述
HNC2-2.5P-10DS 10 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
HNC2-2.5P-15DSL 15 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
HNC2-2.5P-15DS 15 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
HNC2-2.5P-2DSL 2 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
HNC2-2.5P-2DS 2 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
相关代理商/技术参数
参数描述
HNC225P3DS(12) 制造商:Hirose 功能描述:
HNC263 制造商:Siemens 功能描述:
HNC264 制造商:Siemens 功能描述:
HNC-300P 制造商:LEM 制造商全称:LEM 功能描述:Current Transducer
HNC-40CA 制造商:LEM 制造商全称:LEM 功能描述:Current Transducer