- 您现在的位置：买卖IC网 > PDF目录60891 > HR100CW3S (EMC TECHNOLOGY INC) 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR PDF资料下载
参数资料
| 型号： | HR100CW3S |
| 厂商： | EMC TECHNOLOGY INC |
| 元件分类： | 衰减器 |
| 英文描述： | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| 文件页数： | 2/3页 |
| 文件大小： | 210K |
| 代理商： | HR100CW3S |
EMC TECHNOLOGY
CAGE CODE # 24602
DWG #
1010085000
8851 SW OLD KANSAS AVE.
CHANGE NOTICE
EN 04-E049
REV LVL
-
STUART, FL 34997
SHEET
2
OF
3
3.2.2
GROUP B TESTING (7 SAMPLES APPROVED FROM GROUP A).
3.2.2.1
SUB-GROUP 1 (3 SAMPLES)
3.2.2.1.1 LOW TEMPERATURE OPERATION
3.2.2.1.1.1
USE FINAL ELECTRICAL MEASUREMENTS FROM GROUP A.
3.2.2.1.1.2
DISSIPATE LOW POWER FOR A DURATION OF 45 +5/-0 MINUTES. ALLOW
TO STABILIZE AT 25°C FOR 24 HOURS.
3.2.2.1.2 AFTER LOW TEMPERATURE ELECTRICAL MEASUREMENTS - MEASURE AND RECORD
VSWR @ 1 GHZ AND ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.2.1.3 HIGH TEMPERATURE BAKE – +125°C +/- 5°C FOR 100 HRS THEN STABILIZE AT 25°C
FOR 4 HRS.
3.2.2.1.3.1
VISUAL EXAMINATION. INSPECT FOR EVIDENCE OF MECHANCIAL
DAMAGE.
3.2.2.1.4 AFTER HIGH TEMPERATURE BAKE ELECTRICAL TEST - MEASURE AND RECORD VSWR
@ 1 GHZ AND ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.2.1.5 TERMINATION ADHESION - SOLDER A WIRE AND PULL WITH 15 GRAMS
PERPENDICULAR TO AND AWAY FROM THE SURFACE AREA.
3.2.2.1.5.1
VISUAL INSPECTION – THERE SHALL BE NO SEPARATION OF MATERIAL.
3.2.2.1.6 TERMINATION SOLDERABILITY IMMERSE EACH SAMPLE 5 SECONDS IN A SOLDER
POT HELD AT 220°C +/- 5°C USING 60/40 OR 63/37 TIN-LEAD COMPOSITION.
3.2.2.2
SUB-GROUP 2 (4 SAMPLES)
3.2.2.2.1 INITIAL RF MEASUREMENTS - USE FINAL ELECTRICAL MEASUREMENTS FROM GROUP
A.
3.2.2.2.2 LIFE TEST – OPERATE SAMPLES UNITS FOR 1000 HRS AT 70°C AT INPUT POWER
PER 1.1.6. ELECTRICAL MEASUREMENTS SHALL BE MADE AT 250 +48/-0 HRS, 500 +48/-
0 HRS, AND 1000 +48/-0 HRS.
3.2.2.2.3 FINAL RF MEASUREMENTS - MEASURE AND RECORD VSWR @ 1 GHZ AND
ATTENUATION AT DC (0 GHZ) AND 1.0 GHZ.
3.2.3
GROUP C (QCI TESTING 4 SAMPLES APPROVED FROM GROUP A).
3.2.3.1
LOAD LIFE TEST – BURN-IN UNITS AT 70°C WITH INPUT POWER PER 1.1.6 FOR A DURATION OF
1000 HOURS (1 HOURS ON, HOUR OFF). MEASURE AND RECORD ELECTRICALS AT 0, 250,
500, AND 1000 HOURS.
3.2.3.2
AFTER LOAD LIFE RF MEASUREMENTS – MEASURE AND RECORD VSWR AND ATTENUATION AT
1 GHZ AT 25°C. TEST ACCEPTABLE LIMITS PER 4.2.1 OF TP-8965.
3.4
TEST DATA REQUIREMENTS:
3.4.1
TEST DATA REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-8965.
3.4.2
DATA RETENTION - 24 MONTHS.
3.4.3
TEST SAMPLES REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-8965.
4.0
PACKAGING:
STANDARD PACK PER MC0023. (SERIALIZED WAFFLE PACK)
相关PDF资料 |
PDF描述 |
|---|---|
| HR105AW3S | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HR105CW3S | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HR145BW3S | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HR145CW3S | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HR155AW3S | 0 MHz - 12400 MHz RF/MICROWAVE FIXED ATTENUATOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HR10-10J-12P | 功能描述:JACK W/PIN INSERT (12 CONTACT) RoHS:否 类别:连接器，互连式 >> 圆形 系列:HR10 标准包装:1 系列:军用, MIL-DTL-5015, MS 连接器类型:插座，公形引脚 位置数:2 外壳尺寸 - 插件:22-11 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊杯 紧固型:有螺纹 方向:N（正常型） 防护等级:抗环境影响 外壳材料，表面处理:铝，镀草绿色镉 触点表面涂层:银 特点:应力消除 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:1750VAC，2450VDC 工作温度:-55°C ~ 125°C 配套产品:IMS3108R22-11S-ND - CONN PLUG 2 POS RT ANG W/SCKTIMS3106F22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106E22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106R22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS2518322-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKT 其它名称:IMS3101E22-11P |
| HR10-10J-12P(73) | 功能描述:环形推拉式连接器 12P JACK SHELL SZ 10 MALE AU TERM SOLDR RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
| HR10-10J-12S | 功能描述:JACK W/SOCKET INSERT (12 CON) RoHS:否 类别:连接器，互连式 >> 圆形 系列:HR10 标准包装:1 系列:军用, MIL-DTL-5015, MS 连接器类型:插座，公形引脚 位置数:2 外壳尺寸 - 插件:22-11 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊杯 紧固型:有螺纹 方向:N（正常型） 防护等级:抗环境影响 外壳材料，表面处理:铝，镀草绿色镉 触点表面涂层:银 特点:应力消除 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:1750VAC，2450VDC 工作温度:-55°C ~ 125°C 配套产品:IMS3108R22-11S-ND - CONN PLUG 2 POS RT ANG W/SCKTIMS3106F22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106E22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106R22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS2518322-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKT 其它名称:IMS3101E22-11P |
| HR10-10J-12S(73) | 功能描述:环形推拉式连接器 12P JACK SHELL SZ 10 FEMALE AU TERM SOLDR RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
| HR10-10J-T04 | 功能描述:环形推拉式连接器 WIRING TOOL FOR HR10-10J CONNECTOR RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
发布紧急采购，3分钟左右您将得到回复。