- 您现在的位置：买卖IC网 > PDF目录43683 > HR10A-10WTP-12P(73) 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, SOLDER, PLUG PDF资料下载
参数资料
| 型号： | HR10A-10WTP-12P(73) |
| 元件分类： | 圆形连接器 |
| 英文描述： | 12 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, SOLDER, PLUG |
| 文件页数： | 10/20页 |
| 文件大小： | 2215K |
| 代理商： | HR10A-10WTP-12P(73) |
196
HR10 Series●Push-Pull Connectors
■
Connection work procedure(plug side)
This applies also to the jack side connection work.
No special connection work procedure is given here for the receptacle side because no special procedure is
necessary.
HR10
TYPE
HR10A
TYPE
Table 2 spanner jaw distance
Size
HR10
HR10A
Size 7
8
7.5
Size 10
11
9.5
Size 13
––
13
Table 1
Size
Tightening force
Size 7
1.5Nm(15kgcm)
Size 10
2Nm(20kgcm)
Size 13
2Nm(20kgcm)
Table 3 cable end processing dimensions
Size
Dimension C
for HR10
Dimension D for HR10A
Solder type Crimp type
Size 7
5.5 or less
10
15-20
Size 10
7 or less
16
15-20
Size 13
––
26
HR10 TYPE
HR10A TYPE
1
Use cables with a nominal sectional area of 0.129 mm
2 (AWG#26) at the finish outside diameters applicable for each size.
2
After processing the cable ends according to the dimensions in the above drawings, fit the parts to the cable as shown in the drawings.
Fit the parts to the cable in the following order: tightener, clamp
washer, and plug body.
Fit the parts to the cable in the following order: cord bushing and
plug body.
3
(solder type)
Insert the P shell unit into the assembly tool stand and solder it.
(crimp type)
After crimping the appropriate crimp terminal to the cable core, insert the crimp terminal into the terminal hole in the P shell unit.
4
Assemble the connector in the following steps.
1.Screw the plug body into the thread in the P shell unit with the
tightening force shown in Table 1 using a torque wrench with a
fixed torque.
Before tightening the plug body,slacken part C so that no load is
applied to the soldered wires.
2.Apply the clamp washer to the bifurcated part of the plug body,
and then tighten the tightener until surface B touches the plug
body surface A.
1.Fix by caulking the clamp accompanying the cable with the cable
crimping tool(HR10A-TC-02)
2.Screw the plug body into the thread in the P shell until with a
tightening force shown in Table 1 using a torque wrench with a
fixed torque. Before tightening the plug body, slacken the part D so
that no load is applied to the soldered wires.
3.Tighten the set screw so that the tip of the screw presses one of
the two bosses on the clamp.
Fix the set screw with a tightening torque of 0.3N(3kgcm)
4.Attach the cord bushing to the plug body.
5
This completes the work.
For any question on using the plugs, contact our sales or engineering department.
Remarks : Loctite 242, Henkel Japan or equivalent is recommend to prevent the male thread section of the P shell unit and the set screw
for loosing.
P shell unit
C
Plug body
Clamp washer
Tightener
Spanner jaw distance
Cable
About 2
Bifurcated part
Face A
Face B
P shell unit
Clamp
Plug body
Boss
Set screw
Cable
Spanner jaw distance
Cord bushing
D
2 or more
A
About 2 for solder type
2
for crimp type
0
-0.5
相关PDF资料 |
PDF描述 |
|---|---|
| HR10A-10WTP-12S(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, SOLDER, PLUG |
| HR10A-10WTR-12S(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
| HR10A-10WTR-12SB(73) | 12 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, SOLDER, RECEPTACLE |
| HR10A-13J-20PC(73) | 20 CONTACT(S), ZINC ALLOY AND BRASS, MALE, CIRCULAR CONNECTOR, CRIMP, JACK |
| HR10A-13J-20SC(73) | 20 CONTACT(S), ZINC ALLOY AND BRASS, FEMALE, CIRCULAR CONNECTOR, CRIMP, JACK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HR10A-10WTP-12S | 功能描述:CONN PLUG 12POS FEMALE SOLDER RoHS:否 类别:连接器，互连式 >> 圆形 系列:HR10A 产品目录绘图:63000 Series 63000 Series Front 63000 Series Side 63000 Series Cable End 63000 Series Assembly In Line 6P Mating Face 标准包装:500 系列:63000 连接器类型:插孔，母插口 位置数:6 外壳尺寸 - 插件:迷你型 DIN 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊接 紧固型:推挽式 方向:带标记 防护等级:- 外壳材料，表面处理:青铜，镀镍 触点表面涂层:- 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:- 工作温度:-40°C ~ 85°C 其它名称:275-1037 |
| HR10A-10WTP-12S(01) | 制造商:Hirose 功能描述:CONN PLUG 12POS FEMALE SLD GOLD |
| HR10A-10WTP-12S(73) | 功能描述:环形推拉式连接器 PLUG 12P FEM SOLDER RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
| HR10A-10WTP-12S(74) | 功能描述:环形推拉式连接器 PLUG 12POS FEM SLD GOLD RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
| HR10A-10WTR-12P(01) | 制造商:Hirose 功能描述:CONN RECEPT 12POS MALE SLD GOLD |
发布紧急采购，3分钟左右您将得到回复。