- 您现在的位置：买卖IC网 > PDF目录148722 > HR30-6PA-6P(71) 6 CONTACT(S), PPS/PBT/POLYACETAL, MALE, CIRCULAR CONNECTOR, SOLDER, PLUG PDF资料下载
参数资料
| 型号： | HR30-6PA-6P(71) |
| 元件分类： | 圆形连接器 |
| 英文描述： | 6 CONTACT(S), PPS/PBT/POLYACETAL, MALE, CIRCULAR CONNECTOR, SOLDER, PLUG |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 2/12页 |
| 文件大小： | 432K |
| 代理商： | HR30-6PA-6P(71) |
Solder termination fixture
Insulator/contact assembly
Block end face
10
BAssembly Procedures
Plug Assembly Sequence
1
2
Thread the back shell, strain relief, seal bushing, spring and push/pull locking collar over the cable as shown above.
Solder type
1. Pre-solder the exposed cable conductors (dia. A). The diameter of the pre-soldered conductors should not exceed 0.7
mm for 6 contact plug and 1.0 mm for 3 contact plug.
2. Insert the insulator body over the applicable solder termination fixture.
3. Insert the pre-soldered conductors in the contact soldering pot and solder them in place.
Soldering iron temperature should be 280 ±10 applied for 3-4 second.
Crimp type
1. Crimp the applicable contact to the stripped conductor. Use correct crimp tools. Verify the dimensions and crimp
configuration.
2. Insert the contact into the appropriate opening in the insulator body.
3. Verify fully seated position by applying a slight pull force on the conductor. The contact should remain in place.
Re-insert if not seated.
A
B
Solder type : 3 and 6 pos.
Solder type : 12 pos.
Crimp type : 10 and 12 pos.
2 mm
2mm
-0
-0.5
5.5 mm max.
10 mm max.
15
to 20 mm
B
Seal bushing
Strain relief
Back shell
Insulator/contact assembly
Cable
Spring
Push/pull locking collar
A
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
相关PDF资料 |
PDF描述 |
|---|---|
| HR30-6PA-6S(71) | 6 CONTACT(S), PPS/PBT/POLYACETAL, FEMALE, CIRCULAR CONNECTOR, SOLDER, PLUG |
| HGN-375A04W-20-1C | 4A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOCKET |
| HGN-375A04W-20-1MM1 | 4A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOCKET |
| HGN-375A04W-20-1MM3 | 4A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOCKET |
| HGN-375A04W-20-1MM4 | 4A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HR30-6PA-6PC | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors |
| HR30-6PA-6PD | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors |
| HR30-6PA-6S | 功能描述:CONN PLUG 6POS FEMALE SOLDER RoHS:否 类别:连接器，互连式 >> 圆形 系列:HR30 标准包装:1 系列:军用, MIL-DTL-5015, MS 连接器类型:插座，公形引脚 位置数:2 外壳尺寸 - 插件:22-11 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊杯 紧固型:有螺纹 方向:N（正常型） 防护等级:抗环境影响 外壳材料，表面处理:铝，镀草绿色镉 触点表面涂层:银 特点:应力消除 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:1750VAC，2450VDC 工作温度:-55°C ~ 125°C 配套产品:IMS3108R22-11S-ND - CONN PLUG 2 POS RT ANG W/SCKTIMS3106F22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106E22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS3106R22-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKTIMS2518322-11S-ND - CONN PLUG 2 POS STRAIGHT W/SCKT 其它名称:IMS3101E22-11P |
| HR30-6PA-6S(71) | 功能描述:环形推拉式连接器 6P PLUG SHELL SZ 6 FEMALE TERM SOLDER RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A |
| HR30-6PA-6SC | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Plastic Connectors |
发布紧急采购，3分钟左右您将得到回复。