- 您现在的位置：买卖IC网 > PDF目录17007 > HW-DLN-3C (Lattice Semiconductor Corporation)ACCY ISP CABLE 8PIN AMP 10P CONN PDF资料下载
参数资料
| 型号： | HW-DLN-3C |
| 厂商： | Lattice Semiconductor Corporation |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | ACCY ISP CABLE 8PIN AMP 10P CONN |
| 标准包装： | 1 |
| 附件类型： | 下载缆线 |
| 适用于相关产品： | Lattice 可编程产品 |
| 其它名称： | 220-1153 |
ispDOWNLOAD Cables
Table 3. Recommended Pin Connections (Continued)
Device Family
TDI
TDO
TMS
TCK
ispEN/PROG 1,6 TRST 2 /DONE 3,6
INITN 3,6
VCC
GND
ispPAC
?
Mandatory Mandatory Mandatory Mandatory
N/A
N/A
N/A
Mandatory Mandatory
1. Refer to the ispDOWNLOAD Cable ispEN Pin section below for detailed information on connecting the ispEN/ENABLE pin.
2. Refer to the ispDOWNLOAD Cable TRST Pin section below for detailed information on connecting the TRST pin.
3. The DONE and INITN signals are only available on the ispDOWNLOAD USB cable. These signals are inputs to the cable and can be used to help verify device
configuration.
4. Please refer to the device data sheet. Not all packages have the ENABLE or TRST pin.
5. When using PAC-Designer ? software to program ispPAC devices, do not connect this pin.
6. When using these connections, be sure to select the correct settings in the Cable and I/O Port Setup dialog in the ispVM System/Diamond Programmer soft-
ware.
Connecting the ispDOWNLOAD Cable
The target board must be un-powered when connecting, disconnecting, or reconnecting the ispDOWNLOAD
Cable. Always connect the ispDOWNLOAD Cable’s GND pin (black wire), before connecting any other JTAG pins.
Failure to follow these procedures can result in damage to the target programmable device.
ispDOWNLOAD Cable TRST Pin
Connecting the board TRST pin to the cable TRST pin is not recommended. Instead, connect the board TRST pin
to Vcc. If the board TRST pin is connected to the cable TRST pin, instruct ispVM/Diamond Programmer to drive the
TRST pin high as follows:
1. Select the Options menu item.
2. Select Cable and I/O Port Setup .
3. Check the TRST/Reset Pin Connected checkbox.
4. Select the Set High radio button.
If the proper option is not selected, the TRST pin will be driven low by ispVM/Diamond Programmer. Consequently,
the BSCAN chain will not work because the chain will be locked into RESET state.
ispDOWNLOAD Cable ispEN Pin
The following pins should be grounded:
? BSCAN pin of the 2000VE devices
? ENABLE pin of MACH4A3/5-128/64, MACH4A3/5-64/64 and MACH4A3/5-256/128 devices.
However, the user has the option of having the BSCAN and ENABLE pins driven by the ispEN pin from the cable.
In this case, ispVM/Diamond Programmer must be configured to drive the ispEN pin low as follows:
1. Select the Options menu item.
2. Select Cable and I/O Port Setup .
3. Check the ispEN/BSCAN Pin Connected checkbox.
4. Select the Set Low radio button.
6
相关PDF资料 |
PDF描述 |
|---|---|
| MAX11040DBEVKIT+ | KIT EVALUATION FOR MAX11040 |
| MAX1231BEVKIT# | KIT EVALUATION FOR 12BIT ADCS |
| SDR1105-470KL | INDUCTOR POWER 47UH 10% SMD |
| GSM11DSEH-S13 | CONN EDGECARD 22POS .156 EXTEND |
| 101-0437 | CARD DGTL IO 16/8 SOURCNG SR9205 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HWDMG131500111 | 制造商:OPLINK 制造商全称:OPLINK Communications Inc. 功能描述:Green High Isolation 1310/1550 nm Micro-Optic WDM |
| HWDMG131500112 | 制造商:OPLINK 制造商全称:OPLINK Communications Inc. 功能描述:Green High Isolation 1310/1550 nm Micro-Optic WDM |
| HWDMG131500115 | 制造商:OPLINK 制造商全称:OPLINK Communications Inc. 功能描述:Green High Isolation 1310/1550 nm Micro-Optic WDM |
| HWDMG13150011H | 制造商:OPLINK 制造商全称:OPLINK Communications Inc. 功能描述:Green High Isolation 1310/1550 nm Micro-Optic WDM |
| HWDMG131500221 | 制造商:OPLINK 制造商全称:OPLINK Communications Inc. 功能描述:Green High Isolation 1310/1550 nm Micro-Optic WDM |
发布紧急采购，3分钟左右您将得到回复。