参数资料
| 型号： | HW-FMC-DBG-G |
| 厂商： | Xilinx Inc |
| 文件页数： | 9/30页 |
| 文件大小： | 0K |
| 描述： | FMC DEBUG MEZZANINE CARD |
| 产品变化通告： | Development Systems Discontinuation 11/Jan/2010 |
| 标准包装： | 1 |
| 附件类型： | 调试接口模块 |
| 适用于相关产品： | 支持 Xilinx FMC 的板 |
| 其它名称： | 122-1692 |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
Quick Start
System Setup
Complete the following steps to install the XM105 to a Xilinx board. For additional
1.
2.
3.
4.
5.
6.
7.
Turn off the DC power switch and disconnect the input power source from the board.
Remove the XM105 from the electrostatic device (ESD) bag.
Using a small Phillips screwdriver, remove the two screws from the bottom side of the
two standoffs on the XM105. These screws will be used to attach the board to the
standoffs attached to the XM105.
Install the XM105 to the board’s FMC HPC or FMC LPC connector. The XM105 hangs
Turn the attached board and XM105 unit such that the FPGA is facing the table. Install
two screws from the bottom side of board’s FMC mounting holes into the two
standoffs attached to the XM105. Hand tighten the two mounting screws to the bottom
of the board.
Turn the attached board and XM105 unit over so that the Xilinx FPGA is visible.
Connect the input power source to the board. Turn the board power input switch to
ON.
The system is now ready for use. The three power good LEDS on the XM105 should be on,
indicating power supplied from the board is good at the XM105.
X-Ref Target - Figure 1-1
UG537_01_102009
Figure 1-1:
Installation of Mezzanine Card to Board FMC Connector
Technical Support
Xilinx offers technical support for this product only when used in conjunction with boards
listed in Table 1-1 . For assistance with the XM105 and Xilinx boards, contact Xilinx for
technical support at www.xilinx.com/support .
FMC XM105 Debug Card User Guide
UG537 (v1.3) June 16, 2011
9
相关PDF资料 |
PDF描述 |
|---|---|
| HW-FMC-VIDEO-DC-G | HARDWARE FMC-VIDEO DAUGHTER CARD |
| HW-FMC-XM104-G | FMC XM104 CONNECTIVITY CARD |
| HW-PC4-MS | CABLE MOUSE SPLITTER FOR HW-PC4 |
| HW-S3PCIE-DK-PROMO1 | KIT STARTER SPARTAN3 PCI EXPRESS |
| HW-SPAR3-SK-UNI-G | KIT STARTER SPARTAN-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HW-FMC-VIDEO-DC-G | 功能描述:HARDWARE FMC-VIDEO DAUGHTER CARD RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF) |
| HW-FMC-XM101-G | 功能描述:HARDWARE FMC INTERFACE CARD RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF) |
| HW-FMC-XM104-G | 功能描述:FMC XM104 CONNECTIVITY CARD RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF) |
| HW-FMC-XM105-G | 功能描述:FMC XM105 CONNECTIVITY CARD RoHS:是 类别:编程器，开发系统 >> 配件 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF) |
| HW-FPGABOARD | 制造商:Xilinx 功能描述:FPGA DEMONSTRATION BOARD |
发布紧急采购，3分钟左右您将得到回复。