Electrical
Accessory Products
Mating Connectors
Edition 1/06.2002
6/1
Extraction Tool
for High Current Contacts
High current plugs and jacks can be disassembled from the
moulding by means of a special Extraction Tool (H15 S2,
H15 S4). Holding the extraction tool over the centre of the
connector's female contact the outer part of the extraction
tool should be fed between the moulding and the outside of
the female contact itself. This releases the spring clip fixing
the contacts, in order to pull the contacts out of their mould-
ing for replacement. If the operation is performed correctly
very little force is required. Extreme care should be taken
since incorrect procedure and excessive force could dam-
age the tool and/or connector.
This tool is available as an accessory for both screw or sol-
der high current contacts.
Note: In order to avoid damage never manipulate high cur-
rent contacts when plugged-in!
Description:
Extraction Tool
Part Number:
HZZ 00150
Connector Retention Clip V
The retention clip V is an accessory which guarantees se-
cure connection even under severe vibration, as for exam-
ple in mobile applications. One connector retention system
fits to almost all units and all of the aforementioned connec-
tor types.
The following converter series are delivered with pre-
punched holes in the back plate for fast field-mounting of
retention clips:
H, M, K, PSK, S, PSS and T (Q series only in combination
with Mounting Plate Q, see Mounting Supports)
Description:
Retention Clips V
Delivery content: 2 pcs.
Part Number:
HZZ 01209
Connector retention clips (unlocked)
Connector retention clips (locked)
12050
Fig. 16
Connector retention clip
Fig. 15
Extraction tool
Code Key System
An efficient coding system is of great importance and can-
not be valued highly enough in complex electronic systems.
Since power supplies handle high currents and voltages
any false connection could not only be extremely danger-
ous but also quite costly.
This integrated polarizing system allows effortless coding
by the simple insertion of Coding Wedges into the female
connector mouldings. The corresponding counter-parts, i.e.
the coding tabs of the male moulding just have to be broken
off to match the right female part. Major advantages are
high mechanical stability and ease of handling. The H11
connectors have 10 and the H15 connectors have 8 coding
positions. Using 4 coding wedges results in 210 (H11) re-
spectively 70 (H15) different coding possibilities. Coding
wedges are available as accessories to female connectors
with the following part number:
Description:
Coding wedge (Codierkeil)
Delivery content: 5 pcs.
Part Number:
HZZ 00202
2
32
5
8
11
14
17
20
23
26
29
K
I
HG
F
K
I
H
G
F
2
5
8
11
14
17
20
23
26
29
32
Coding tab
Coding wedge
4
6.5
12041
Fig. 14
Integrated code key system