- 您现在的位置：买卖IC网 > PDF目录378599 > IA82510-PDW28I-01 (Innovasic Semiconductor) ASYNCHRONOUS SERIAL CONTROLLER PDF资料下载
参数资料
| 型号： | IA82510-PDW28I-01 |
| 厂商： | Innovasic Semiconductor |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | ASYNCHRONOUS SERIAL CONTROLLER |
| 中文描述： | 1 CHANNEL(S), SERIAL COMM CONTROLLER, PDIP28 |
| 封装： | 0.600 INCH, PLASTIC, DIP-28 |
| 文件页数： | 11/14页 |
| 文件大小： | 76K |
| 代理商： | IA82510-PDW28I-01 |
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
ERRATA
PLEASE NOTE:
When using the -01 version of the IA82510, please refer to the errata section,
"Production Version -01, Errata".
When using the -00 version of the IA82510, please refer to the errata section,
"Production Version -00, Errata".
Production Version -01, Errata
The following errata are known problems with the -01 version of the IA82510. This is inclusive of
all package types and environment grades. A workaround to the identified problem has been
provided where possible.
ALL ERRATA LISTED IN PRODUCTION VERION -00 HAVE
BEEN FIXED IN THIS VERSION OF THE DEVICE UNLESS OTHERWISE NOTED.
-00 Errata not fixed in this Production Version:
1. Problem: Device does not operate at 8 MHz in divide-by-one mode
Analysis: System testing revealed this operational deficiency.
Workaround: Switch to divide-by-two mode using 2X clock input
New Errata for Production Version -01:
2. Problem: RX FIFO locks up unexpectedly just after configuration and before starting
reception.
Analysis: An RCM command is executed with data of xB8. This is an “enable RX”, “flush RX
machine”, “flush RX FIFO”, and “lock RX FIFO” command done in a single instruction. The
“flush RX machine” should unlock the RX FIFO, creating a conflict with the simultaneous
“lock RX FIFO” command. The original Intel device apparently ignores or gives the “lock RX
FIFO” command lower priority in this case. The IA82510 has this priority reversed.
Apparently, the application software in this case expected the “lock RX FIFO” command to
fail.
Workaround: Do not execute a “flush RX FIFO” and “lock RX FIFO” command
simultaneously. Break up into separate RCM commands.
3. Problem: Unreliable transmits in AUTO TX mode.
Analysis: Many systems use the RTS output to activate the line transceiver. When the
Transmit Mode field in the TMD register is set to semi-auto or automatic mode, RTS is
controlled by the TX state machine. On the first character, RTS asserts at the same time as
the start bit on the TXD output, whereas the original Intel device asserts RTS a full bit time
before assertion of the start bit on TXD. At full temperature range, the width of the start bit
Data Sheet
As of Production Ver. 01
Copyright
2001
innov
ASIC
The End of Obsolescence
ENG211001219-01
www.innovasic.com
Customer Support:
Page 11 of 14
1-888-824-4184
相关PDF资料 |
PDF描述 |
|---|---|
| IA82510-PLC28I-01 | ASYNCHRONOUS SERIAL CONTROLLER |
| IA82510 | ASYNCHRONOUS SERIAL CONTROLLER |
| IA82510-PLC28I | 22 OHM,5%,1/4W,1210 |
| IA82510-PDW28I | ASYNCHRONOUS SERIAL CONTROLLER |
| IA82527 | Serial Communications Controller CAN Protocol |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IA82510-PDW28I-R-01 | 功能描述:IC ASYNCHRONOUS SERIAL CTRL RoHS:是 类别:集成电路 (IC) >> 接口 - UART（通用异步接收器/发送器） 系列:* 标准包装:250 系列:- 特点:* 通道数:2，DUART FIFO's:16 字节 规程:RS232，RS485 电源电压:2.25 V ~ 5.5 V 带并行端口:- 带自动流量控制功能:是 带IrDA 编码器/解码器:是 带故障启动位检测功能:是 带调制解调器控制功能:是 带CMOS:是 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:托盘 其它名称:XR16L2551IM-F-ND |
| IA82510-PLC28C-00 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Controller Miscellaneous - Datasheet Reference |
| IA82510-PLC28C-01 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Controller Miscellaneous - Datasheet Reference |
| IA82510-PLC28I | 制造商:INNOVASIC 制造商全称:INNOVASIC 功能描述:ASYNCHRONOUS SERIAL CONTROLLER |
| IA82510-PLC28I-00 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Controller Miscellaneous - Datasheet Reference |
发布紧急采购，3分钟左右您将得到回复。