参数资料
| 型号： | ICL7673CBA-T |
| 厂商： | Intersil |
| 文件页数： | 4/7页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH BATTERY BACKUP 8-SOIC |
| 标准包装： | 2,500 |
| 应用： | 电池备份，工业/汽车，大电流开关 |
| FET 型： | N 和 P 沟道 |
| 输出数： | 1 |
| 内部开关： | 是 |
| 电源电压： | 2.5 V ~ 15 V |
| 电流 - 电源： | 1.5µA |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOICN |
| 包装： | 带卷 (TR) |
ICL7673
low load currents the output voltage is nearly equal to the
greater of the two inputs. The maximum voltage drop across
switch P 1 or P 2 is 0.5V, since above this voltage the body-
drain parasitic diode will become forward biased. Complete
1mA
I LOAD = 10mA
switching of the inputs and open-drain outputs typically
occurs in 50 μ s.
100mA
10nA
1nA
1000pA
V S = 0V
85°C
Input Voltage
The input operating voltage range for V P or V S is 2.5V to
15V. The input supply voltage (V P or V S ) slew rate should be
limited to 2V per microsecond to avoid potential harm to the
circuit. In line-operated systems, the rate-of-rise (or fall) of
the supply is a function of power supply design. For battery
applications it may be necessary to use a capacitor between
the input and ground pins to limit the rate-of-rise of the
supply voltage. A low-impedance capacitor such as a
0.047 μ F disc ceramic can be used to reduce the rate-of-rise.
Status Indicator Outputs
10pA
25°C
The N-Channel open drain output transistors can be used to
indicate which supply is connected, or can be used to drive
external PNP transistors to increase the power switching
capability of the circuit. When using external PNP power
1pA
0 2 4 5 6 8 10
INPUT V P (V)
FIGURE 5. I S LEAKAGE CURRENT V P TO V S AS A
FUNCTION OF INPUT VOLTAGE
12
transistors, the output current is limited by the beta and
thermal characteristics of the power transistors. The
application section details the use of external PNP
transistors.
Detailed Description
As shown in the Functional Diagram, the ICL7673 includes a
comparator which senses the input voltages V P and V S . The
output of the comparator drives the first inverter and the
open-drain N-Channel transistor P BAR . The first inverter
drives a large P-Channel switch, P 1 , a second inverter, and
another open-drain N-Channel transistor, S BAR . The second
inverter drives another large P-Channel switch P 2 . The
ICL7673, connected to a main and a backup power supply,
will connect the supply of greater potential to its output. The
circuit provides break-before-make switch action as it
switches from main to backup power in the event of a main
power supply failure. For proper operation, inputs V P and V S
must not be allowed to float, and, the difference in the two
supplies must be greater than 50mV. The leakage current
through the reverse biased parasitic diode of switch P 2 is
very low.
Applications
A typical discrete battery backup circuit is illustrated in Figure
6. This approach requires several components, substantial
printed circuit board space, and high labor cost. It also
consumes a fairly high quiescent current. The ICL7673
battery backup circuit, illustrated in Figure 7, will often replace
such discrete designs and offer much better performance,
higher reliability, and lower system manufacturing cost. A
trickle charge system could be implemented with an additional
resistor and diode as shown in Figure 8. A complete low
power AC to regulated DC system can be implemented using
the ICL7673 and ICL7663S micropower voltage regulator as
shown in Figure 9.
+5V V O
PRIMARY +5V OR
DC POWER +3V
STATUS
INDICATOR
Output Voltage
The output operating voltage range is 2.5V to 15V. The
insertion loss between either input and the output is a
function of load current, input voltage, and temperature. This
is due to the P-Channels being operated in their triode
region, and, the ON-resistance of the switches is a function
of output voltage V O . The ON-resistance of the P-Channels
have positive temperature coefficients, and therefore as
temperature increases the insertion loss also increases. At
4
NiCAD
BATTERY
STACK
GND
FIGURE 6. DISCRETE BATTERY BACKUP CIRCUIT
FN3183.4
July 22, 2005
相关PDF资料 |
PDF描述 |
|---|---|
| ICL8069DESA | IC VREF SHUNT 1.23V 8-SOIC |
| ICM7211AMIPL | IC LCD DISPLAY DRVR 4DGT 40-DIP |
| ICM7212AMIQH-D | IC DECODR/DVR LED 4DIGIT 44PLCC |
| ICM7218BIJI | IC DRIVER DECODER 8DIG 28-CDIP |
| ICM7218DIQI | IC DECODR/DVR LED 8DIGIT 28PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICL7673CBAZA | 功能描述:电池管理 W/ANNEAL BATRY BCKUP SWITCH COM RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| ICL7673CBAZA-T | 功能描述:电池管理 W/ANNEAL BATRY BCKUP SWITCH COM TAPE & RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| ICL7673CPA | 功能描述:电池管理 BATRY BACKUP SWITCH COM RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| ICL7673CPA136 | 制造商:Harris Corporation 功能描述: |
| ICL7673CPAZ | 功能描述:电池管理 W/ANNEAL BATTERY BAC KUPSWITCH8PDIPCOM RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。