- 您现在的位置：买卖IC网 > PDF目录67109 > ICS514M (INTEGRATED DEVICE TECHNOLOGY INC) 140 MHz, OTHER CLOCK GENERATOR, PDSO8 PDF资料下载
参数资料
| 型号： | ICS514M |
| 厂商： | INTEGRATED DEVICE TECHNOLOGY INC |
| 元件分类： | 时钟产生/分配 |
| 英文描述： | 140 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| 封装： | 0.150 INCH, SOIC-8 |
| 文件页数： | 3/7页 |
| 文件大小： | 236K |
| 代理商： | ICS514M |
LOCO PLL Clock Generator
MDS 514 D
3
Revision 070704
In te gr ated Circuit Systems ● 525 Ra ce Street, San Jose, CA 9512 6 ● tel (4 08) 297 -1 201 ● www.icst.com
ICS514
External Components
Decoupling Capacitor
As with any high-performance mixed-signal IC, the
ICS514 must be isolated from system power supply
noise to perform optimally.
A decoupling capacitor of 0.01F must be connected
between VDD and the GND. It must be connected
close to the ICS514 to minimize lead inductance. No
external power supply filtering is required for the
ICS514.
Series Termination Resistor
A 33
terminating resistor can be used next to the CLK
and REF pins for trace lengths over one inch.
Crystal Load Capacitors
The total on-chip capacitance is approximately 12 pF. A
parallel resonant, fundamental mode crystal should be
used. The device crystal connections should include
pads for small capacitors from X1 to ground and from
X2 to ground. These capacitors are used to adjust the
stray capacitance of the board to match the nominally
required crystal load capacitance. Because load
capacitance can only be increased in this trimming
process, it is important to keep stray capacitance to a
minimum by using very short PCB traces (and no vias)
between the crystal and device. Crystal capacitors, if
needed, must be connected from each of the pins X1
and X2 to ground.
The value (in pF) of these crystal caps should equal
(CL -12 pF)*2. In this equation, CL= crystal load
capacitance in pF. Example: For a crystal with a 16 pF
load capacitance, each crystal capacitor would be 8 pF
[(16-12) x 2] = 8.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS514. These ratings, which
are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Recommended Operation Conditions
Item
Rating
Supply Voltage, VDD
7 V
All Inputs and Outputs (referenced to GND)
-0.5 V to VDD+0.5 V
Ambient Operating Temperature
0 to +70
°C
Storage Temperature
-65 to +150
°C
Soldering Temperature
260
°C
Parameter
Min.
Typ.
Max.
Units
Ambient Operating Temperature
0
+70
°C
Power Supply Voltage (measured in respect to GND)
+3.0
+5.5
V
ICS514
LOCO PLL CLOCK MULTIPLIER
TSD
IDT / ICS LOCO PLL CLOCK MULTIPLIER
ICS514
3
相关PDF资料 |
PDF描述 |
|---|---|
| ICS525R-11LF | 40 MHz, OTHER CLOCK GENERATOR, PDSO28 |
| ICS525R-11 | 40 MHz, OTHER CLOCK GENERATOR, PDSO28 |
| ICS525RI-12LF | 62.5 MHz, OTHER CLOCK GENERATOR, PDSO28 |
| ICS525RI-12T | 62.5 MHz, OTHER CLOCK GENERATOR, PDSO28 |
| ICS527R-03T | PLL BASED CLOCK DRIVER, 1 TRUE OUTPUT(S), 1 INVERTED OUTPUT(S), PDSO28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICS514MLF | 功能描述:IC PLL CLOCK GENERATOR 8-SOIC RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:LOCO™ 标准包装:2,000 系列:- 类型:PLL 时钟发生器 PLL:带旁路 输入:LVCMOS，LVPECL 输出:LVCMOS 电路数:1 比率 - 输入:输出:2:11 差分 - 输入:输出:是/无 频率 - 最大:240MHz 除法器/乘法器:是/无 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP（7x7） 包装:带卷 (TR) |
| ICS514MLFT | 功能描述:IC CLK GENERATOR PLL 8-SOIC RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:LOCO™ 标准包装:2,000 系列:- 类型:PLL 频率合成器 PLL:是 输入:晶体 输出:时钟 电路数:1 比率 - 输入:输出:1:1 差分 - 输入:输出:无/无 频率 - 最大:1GHz 除法器/乘法器:是/无 电源电压:4.5 V ~ 5.5 V 工作温度:-20°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-LSSOP（0.175"，4.40mm 宽） 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:NJW1504V-TE1-NDNJW1504V-TE1TR |
| ICS514MT | 功能描述:IC PLL CLOCK GENERATOR 8-SOIC RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:LOCO™ 产品变化通告:Product Discontinuation 04/May/2011 标准包装:96 系列:- 类型:时钟倍频器，零延迟缓冲器 PLL:带旁路 输入:LVTTL 输出:LVTTL 电路数:1 比率 - 输入:输出:1:8 差分 - 输入:输出:无/无 频率 - 最大:133.3MHz 除法器/乘法器:是/无 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:管件 其它名称:23S08-5HPGG |
| ICS-52000 | 功能描述:MIC MEMS DIGITAL OMNI -26DB 制造商:tdk invensense 系列:- 包装:剪切带（CT） 零件状态:在售 类型:MEMS（硅） 输出类型:数字，TDM 方向:全向 频率范围:50Hz ~ 20kHz 灵敏度:-26 ±1dB @ 94dB SPL 信噪比:65dB 电压范围:1.62V ~ 3.63V 电流 - 电源:1.5mA 端口位置:底部 端接:焊盘 大小/尺寸:0.157" 长 x 0.118" 宽（4.00mm x 3.00mm） 高度（最大值）:0.043"（1.10mm） 形状:矩形 标准包装:1 |
| ICS524 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:LOW SKEW 1 TO 4 CLOCK BUFFER |
发布紧急采购，3分钟左右您将得到回复。