- 您现在的位置：买卖IC网 > PDF目录383096 > ICX228AK (Sony Corporation) Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras PDF资料下载
参数资料
| 型号： | ICX228AK |
| 厂商： | Sony Corporation |
| 英文描述： | Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras |
| 中文描述： | 对角线4.5毫米（类型1 / 4）CCD图像传感器用于NTSC彩色视频摄像机 |
| 文件页数： | 9/17页 |
| 文件大小： | 196K |
| 代理商： | ICX228AK |
–
9
–
ICX228AL
Sm = 20
×
log
[dB] (1/10V method conversion value)
×
×
200
VSm
10
1
500
1
Image Sensor Characteristics Measurement Method
Measurement conditions
1) In the following measurements, the device drive conditions are at the typical values of the bias and clock
voltage conditions.
2) In the following measurements, spot blemishes are excluded and, unless otherwise specified, the optical
black (OB) level is used as the reference for the signal output, and the value measured at point [
A] in the
drive circuit example is used.
Definition of standard imaging conditions
1) Standard imaging condition
I
:
Use a pattern box (luminance: 706cd/m
2
, color temperature of 3200K halogen source) as a subject.
(Pattern for evaluation is not applicable.) Use a testing standard lens with CM500S (t = 1.0mm) as an IR cut
filter and image at F8. The luminous intensity to the sensor receiving surface at this point is defined as the
standard sensitivity testing luminous intensity.
2) Standard imaging condition
II
:
Image a light source (color temperature of 3200K) with a uniformity of brightness within 2% at all angles.
Use a testing standard lens with CM500S (t = 1.0mm) as an IR cut filter. The luminous intensity is adjusted
to the value indicated in each testing item by the lens diaphragm.
3) Standard imaging condition
III
:
Image a light source (color temperature of 3200K) with a uniformity of brightness within 2% at all angles.
Use a testing standard lens (exit pupil distance
–
33mm) with CM500S (t = 1.0mm) as an IR cut filter. The
luminous intensity is adjusted to the value indicated in each testing item by the lens diaphragm.
1. Sensitivity
Set to standard imaging condition
I
. After selecting the electronic shutter mode with a shutter speed of
1/250s, measure the signal output (Vs) at the center of the screen and substitute the value into the
following formula.
2. Saturation signal
Set to standard imaging condition
II
. After adjusting the luminous intensity to 10 times the intensity with the
average value of the signal output, 200mV, measure the minimum value of the signal output.
3. Smear
Set to standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity to
500 times the intensity with the average value of the signal output, 200mV. When the readout clock is
stopped and the charge drain is executed by the electronic shutter at the respective H blankings, measure
the maximum value (VSm [mV]) of the signal output and substitute the value into the following formula.
S = Vs
×
[mV]
60
250
相关PDF资料 |
PDF描述 |
|---|---|
| ICX229AK | Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras |
| ICX229AL | Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX229 | Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras |
| ICX238AKE | Diagonal 3mm (Type 1/6) CCD Image Sensor for NTSC Color Cameras(对角线式、3毫米(1/6型)CCD图像传感器（用于NTSC彩色摄像机）) |
| ICX238 | Diagonal 3mm (Type 1/6) CCD Image Sensor for NTSC Color Cameras |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICX228AL | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for EIA B/W Video Cameras |
| ICX229 | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras |
| ICX229AK | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras |
| ICX229AL | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX232 | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Timing Generator for Frame Readout CCD Image Sensor |
发布紧急采购，3分钟左右您将得到回复。