- 您现在的位置：买卖IC网 > PDF目录383096 > ICX249AK (Sony Corporation) Diagonal 8mm (Type 1/2) CCD Image Sensor For PAL Color Video Cameras(对角线式、8毫米(1/2型)CCD图像传感器（用于PAL彩色摄像机）) PDF资料下载
参数资料
| 型号： | ICX249AK |
| 厂商： | Sony Corporation |
| 英文描述： | Diagonal 8mm (Type 1/2) CCD Image Sensor For PAL Color Video Cameras(对角线式、8毫米(1/2型)CCD图像传感器（用于PAL彩色摄像机）) |
| 中文描述： | 对角线毫米（类型1 / 2）CCD图像传感器对于PAL彩色视频摄像机（对角线式，8毫米（1 / 2型）防治荒漠化图像传感器（用于PAL制式彩色摄像机）） |
| 文件页数： | 13/21页 |
| 文件大小： | 227K |
| 代理商： | ICX249AK |
– 13 –
ICX249AK
7. Dark signal shading
After measuring 6, measure the maximum (Ydmax [mV]) and minimum (Ydmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Ydt = Ydmax – Ydmin [mV]
8. Flicker
1) Fy
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, and then measure the difference in the signal level between fields (
Yf [mV]). Then
substitute the value into the following formula.
Fy = (
Yf/200)
×
100 [%]
2) Fcr, Fcb
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, insert an R or B filter, and then measure both the difference in the signal level between
fields of the chroma signal (
Cr,
Cb) as well as the average value of the chroma signal output (CAr, CAb).
Substitute the values into the following formula.
Fci = (
Ci/CAi)
×
100 [%] (i = r, b)
9. Line crawls
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, and then insert a white subject and R, G, and B filters and measure the difference
between Y signal lines for the same field (
Ylw,
Ylr,
Ylg,
Ylb [mV]). Substitute the values into the
following formula.
Lci = (
Yli/200)
×
100 [%] (i = w, r, g, b)
10. Lag
Adjust the Y signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Ylag). Substitute the value into the following
formula.
Lag = (Ylag/200)
×
100 [%]
Ylag (lag)
Y signal output 200mV
Light
FLD
V1
Strobe light
timing
Output
相关PDF资料 |
PDF描述 |
|---|---|
| ICX249AL | Diagonal 8mm (Type 1/2) CCD Image Sensor For CCIR Black-and-White Video Cameras(对角线式、8毫米(1/2型)CCD图像传感器（用于CCIR黑白摄像机）) |
| ICX252AK | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX252AKF | TRANS ARRAY PNP/NPN MINI-6P |
| ICX252 | Timing Generator for Frame Readout CCD Image Sensor |
| ICX252AQ | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICX249AL | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8mm (Type 1/2) CCD Image Sensor for CCIR Black-and-White Video Cameras |
| ICX252 | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Timing Generator and Signal Processor for Frame Readout CCD Image Sensor |
| ICX252AK | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX252AKF | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX252AQ | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
发布紧急采购，3分钟左右您将得到回复。