参数资料
型号: IDT72V205L10TFG
厂商: IDT, Integrated Device Technology Inc
文件页数: 19/25页
文件大小: 0K
描述: IC FIFO SYNC 16KX9 10NS 64QFP
标准包装: 80
系列: 72V
功能: 异步
存储容量: 144K(16K x 9)
访问时间: 10ns
电源电压: 3 V ~ 3.6 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 64-LQFP
供应商设备封装: 64-TQFP(10x10)
包装: 托盘
其它名称: 72V205L10TFG
3
IDT72V205/72V215/72V225/72V235/72V245 3.3V CMOS SyncFIFOTM
256 x 18, 512 x 18, 1,024 x 18, 2,048 x 18 and 4,096 x 18
COMMERCIALANDINDUSTRIAL
TEMPERATURERANGES
MARCH 2013
PIN DESCRIPTION
Symbol
Name
I/O
Description
D0–D17
DataInputs
I
Data inputs for an 18-bit bus.
RS
Reset
I
WhenRS issetLOW,internalreadandwritepointersaresettothefirstlocationoftheRAMarray,FFand PAF
go HIGH, and PAE and EF go LOW. A reset is required before an initial WRITE after power-up.
WCLK
WriteClock
I
WhenWENisLOW,dataiswrittenintotheFIFOonaLOW-to-HIGHtransitionofWCLK,iftheFIFOisnotfull.
WEN
WriteEnable
I
When WEN is LOW, data is written into the FIFO on every LOW-to-HIGH transition of WCLK. When WEN is
HIGH, the FIFO holds the previous data. Data will not be written into the FIFO if the FF is LOW.
RCLK
Read Clock
I
WhenRENisLOW,dataisreadfromtheFIFOonaLOW-to-HIGHtransitionofRCLK,iftheFIFOisnotempty.
REN
Read Enable
I
WhenRENisLOW,dataisreadfromtheFIFOoneveryLOW-to-HIGHtransitionofRCLK. WhenRENisHIGH,
the output register holds the previous data. Data will not be read from the FIFO if the EF is LOW.
OE
OutputEnable
I
WhenOEisLOW,thedataoutputbusisactive.IfOE isHIGH,theoutputdatabuswillbeinahigh-impedance
state.
LD
Load
I
When LDisLOW,dataontheinputsD0–D11iswrittentotheoffsetanddepthregistersontheLOW-to-HIGH
transition of the WCLK, when WEN is LOW. When LD is LOW, data on the outputs Q0–Q11 is read from the
offset and depth registers on the LOW-to-HIGH transition of the RCLK, when REN is LOW.
FL
FirstLoad
I
In the single device or width expansion configuration, FL together with WXI and RXI determine if the mode is
IDT Standard mode or First Word Fall Through (FWFT) mode, as well as whether the PAE/PAF flags are
synchronous or asynchronous. (See Table 1.) In the Daisy Chain Depth Expansion configuration, FL is
grounded on the first device (first load device) and set to HIGH for all other devices in the Daisy Chain.
WXI
WriteExpansion
I
In the single device or width expansion configuration, WXI together with FL and RXI determine if the mode
Input
isIDTStandardmodeorFWFTmode,aswellas whetherthePAE/PAFflagsaresynchronousorasynchronous.
(SeeTable1.) IntheDaisyChainDepthExpansionconfiguration,WXIisconnectedtoWXO(WriteExpansion
Out) of the previous device.
RXI
Read Expansion
I
In the single device or width expansion configuration, RXI together with FL and WXI, determine if the mode
Input
isIDTStandardmodeorFWFTmode,aswellas whetherthePAE/PAFflagsaresynchronousorasynchronous.
(SeeTable1.) IntheDaisyChainDepthExpansionconfiguration,RXIisconnectedtoRXO(ReadExpansion
Out) of the previous device.
FF/IR
Full Flag/
O
IntheIDTStandardmode,the FFfunctionisselected. FF indicateswhetherornottheFIFOmemoryisfull.In
Input Ready
the FWFT mode, the IR function is selected. IR indicates whether or not there is space available for writing to
the FIFO memory.
EF/OR
EmptyFlag/
O
IntheIDTStandardmode,theEFfunctionisselected.EFindicateswhetherornottheFIFOmemoryisempty.
OutputReady
InFWFTmode,theORfunctionisselected.ORindicateswhetherornotthereisvaliddataavailableattheoutputs.
PAE
Programmable
O
WhenPAEisLOW,theFIFOisalmost-emptybasedontheoffsetprogrammedintotheFIFO.Thedefault
Almost-EmptyFlag
offsetatresetis31fromemptyforIDT72V205,63fromemptyforIDT72V215,and127fromemptyforIDT72V225/
72V235/72V245.
PAF
Programmable
O
WhenPAFisLOW,theFIFOisalmost-fullbasedontheoffsetprogrammedintotheFIFO.Thedefaultoffsetat
Almost-FullFlag
resetis31fromfullforIDT72V205,63fromfullforIDT72V215,and127fromfullforIDT72V225/72V235/72V245.
WXO/HF
WriteExpansion
O
In the single device or width expansion configuration, the device is more than half full when HF is LOW. In the
Out/Half-FullFlag
depthexpansionconfiguration,apulseissentfromWXOtoWXIofthenextdevicewhenthelastlocationinthe
FIFOiswritten.
RXO
Read Expansion
O
In the depth expansion configuration, a pulse is sent from RXO to RXI of the next device when the last
Out
location in the FIFO is read.
Q0–Q17
DataOutputs
O
Data outputs for an 18-bit bus.
VCC
Power
+3.3V power supply pins.
GND
Ground
Seven ground pins.
相关PDF资料
PDF描述
VE-2NT-IX-B1 CONVERTER MOD DC/DC 6.5V 75W
IDT72V205L10TF IC FIFO SYNC 16KX9 10NS 64QFP
VE-B0D-MY CONVERTER MOD DC/DC 85V 50W
VI-262-MX-F3 CONVERTER MOD DC/DC 15V 75W
VE-B0B-MY CONVERTER MOD DC/DC 95V 50W
相关代理商/技术参数
参数描述
IDT72V205L10TFG8 功能描述:IC FIFO SYNC 16KX9 10NS 64QFP RoHS:是 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:80 系列:7200 功能:同步 存储容量:18.4K(1K x 18) 数据速率:- 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP(10x10) 包装:托盘 其它名称:72225LB10TF
IDT72V205L15PF 功能描述:IC FIFO SYNC 16KX9 15NS 64QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:80 系列:7200 功能:同步 存储容量:18.4K(1K x 18) 数据速率:- 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP(10x10) 包装:托盘 其它名称:72225LB10TF
IDT72V205L15PF8 功能描述:IC FIFO SYNC 16KX9 15NS 64QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:80 系列:7200 功能:同步 存储容量:18.4K(1K x 18) 数据速率:- 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP(10x10) 包装:托盘 其它名称:72225LB10TF
IDT72V205L15PFGI 功能描述:IC FIFO SYNC 16KX9 15NS 64QFP RoHS:是 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:80 系列:7200 功能:同步 存储容量:18.4K(1K x 18) 数据速率:- 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP(10x10) 包装:托盘 其它名称:72225LB10TF
IDT72V205L15PFGI8 功能描述:IC FIFO SYNC 16KX9 15NS 64QFP RoHS:是 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:80 系列:7200 功能:同步 存储容量:18.4K(1K x 18) 数据速率:- 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP(10x10) 包装:托盘 其它名称:72225LB10TF