- 您现在的位置：买卖IC网 > PDF目录9969 > IDT82V2088BBG (IDT, Integrated Device Technology Inc)IC LINE INTERFACE UNIT 208-PBGA PDF资料下载
参数资料
| 型号： | IDT82V2088BBG |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 21/78页 |
| 文件大小： | 0K |
| 描述： | IC LINE INTERFACE UNIT 208-PBGA |
| 标准包装： | 10 |
| 类型： | 线路接口装置（LIU） |
| 规程： | E1 |
| 电源电压： | 3.13 V ~ 3.47 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 208-BGA |
| 供应商设备封装： | 208-PBGA（17x17） |
| 包装： | 托盘 |
| 其它名称： | 800-1705 82V2088BBG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页当前第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页
28
INDUSTRIAL
TEMPERATURE RANGES
OCTAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
3.6
TRANSMIT AND DETECT INTERNAL PATTERNS
The internal patterns (All Ones, All Zeros, PRBS/QRSS pattern and
Activate/Deactivate Loopback Code) will be generated and detected by the
IDT82V2088. TCLKn is used as the reference clock by default. MCLK can
also be used as the reference clock by setting the PATT_CLK bit (MAINT0,
0AH...) to ‘1’.
If the PATT_CLK bit (MAINT0, 0AH...) is set to ‘0’ and the PATT[1:0] bits
(MAINT0, 0AH...) are set to ‘00’, the transmit path will operate in normal
mode.
3.6.1
TRANSMIT ALL ONES
In transmit direction, the All Ones data can be inserted into the data
stream when the PATT[1:0] bits (MAINT0, 0AH...) are set to ‘01’. The trans-
mit data stream is output from TTIPn/TRINGn. In this case, either TCLKn
or MCLK can be used as the transmit clock, as selected by the PATT_CLK
bit (MAINT0, 0AH...).
3.6.2
TRANSMIT ALL ZEROS
If the PATT_CLK bit (MAINT0, 0AH...) is set to ‘1’, the All Zeros will be
inserted into the transmit data stream when the PATT[1:0] bits (MAINT0,
0AH...) are set to ‘00’.
3.6.3
PRBS/QRSS GENERATION AND DETECTION
A PRBS/QRSS will be generated in the transmit direction and detected
in the receive direction by IDT82V2088. The QRSS is 220-1 for T1/J1 appli-
cations and the PRBS is 215-1 for E1 applications, with maximum zero
restrictions according to the AT&T TR62411 and ITU-T O.151.
When the PATT[1:0] bits (MAINT0, 0AH...) are set to ‘10’, the PRBS/
QRSS pattern will be inserted into the transmit data stream with the MSB
first. The PRBS/QRSS pattern will be transmitted directly or invertedly.
The PRBS/QRSS in the received data stream will be monitored. If the
PRBS/QRSS has reached synchronization status, the PRBS_S bit
(STAT0, 14H...) will be set to ‘1’, even in the presence of a logic error rate
less than or equal to 10-1. The criteria for setting/clearing the PRBS_S bit
are shown in Table-20.
PRBS data canbe inverted throughsetting the PRBS_INVbit(MAINT0,
0AH...).
Any change of PRBS_S bit will be captured by PRBS_IS bit (INTS0,
16H...). The PRBS_IES bit (INTES, 13H...) can be used to determine
whetherthe ‘0’ to‘1’changeof PRBS_Sbitwill becapturedby thePRBS_IS
bitoranychangesofPRBS_SbitwillbecapturedbythePRBS_ISbit.When
the PRBS_IS bit is ‘1’, an interrupt will be generated if the PRBS_IM bit
(INTM0, 11H...) is set to ‘1’.
The received PRBS/QRSS logic errors can be counted in a 16-bit
counter if the ERR_SEL [1:0] bits (MAINT6, 10H...) are set to ‘00’. Refer to
Refer to 3.8 ERROR DETECTION/COUNTING AND INSERTION for the
operation of the error counter.
3.7
LOOPBACK
To facilitate testing and diagnosis, the IDT82V2088 provides four dif-
ferent loopback configurations: Analog Loopback, Digital Loopback,
Remote Loopback and Inband Loopback.
3.7.1
ANALOG LOOPBACK
WhentheALPbit(MAINT1,0BH...)issetto‘1’,thecorrespondingchan-
nel is configured in Analog Loopback mode. In this mode, the transmit sig-
nals are looped back to the Receiver Internal Termination in the receive
path then output from RCLKn, RDn, RDPn/RDNn. At the same time, the
transmit signals are still output to TTIPn/TRINGn in transmit direction. Fig-
ure-15 shows the process.
3.7.2
DIGITAL LOOPBACK
WhentheDLPbit(MAINT1,0BH...)issetto‘1’,thecorrespondingchan-
nel is configured in Digital Loopback mode. In this mode, the transmit sig-
nals are looped back to the jitter attenuator (if enabled) and decoder in
receive path, then output from RCLKn, RDn, RDPn/RDNn. At the same
time, the transmit signals are still output to TTIPn/TRINGn in transmit direc-
tion. Figure-16 shows the process.
Both Analog Loopback mode and Digital Loopback mode allow the
sending of the internal patterns (All Ones, All Zeros, PRBS, etc.) which will
overwrite the transmit signals. In this case, either TCLKn or MCLK can be
used as the reference clock for internal patterns transmission.
3.7.3
REMOTE LOOPBACK
WhentheRLPbit(MAINT1,0BH...)issetto‘1’,thecorrespondingchan-
nel is configured in Remote Loopback mode. In this mode, the recovered
clock and data output from Clock and Data Recovery on the receive path
is looped back to the jitter attenuator (if enabled) and Waveform Shaper in
transmit path. Figure-17 shows the process.
Table-20 Criteria for Setting/Clearing the PRBS_S Bit
PRBS/QRSS
Detection
6 or less than 6 bit errors detected in a 64 bits hopping window.
PRBS/QRSS
Missing
More than 6 bit errors detected in a 64 bits hopping window.
相关PDF资料 |
PDF描述 |
|---|---|
| V48B15M250BF3 | CONVERTER MOD DC/DC 15V 250W |
| IDT72V263L10PFI | IC FIFO 8192X18 10NS 80QFP |
| IDT82P2288BBG8 | TXRX T1/J1/E1 8CHAN 256-PBGA |
| V48B15M250BF2 | CONVERTER MOD DC/DC 15V 250W |
| IDT72615L50PF | IC FIFO BY SYNC 512X18X2 64QFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT82V2088DR | 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| IDT82V2088DRG | 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| IDT82V2108 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:T1 / E1 / J1 OCTAL FRAMER |
| IDT82V2108BB | 功能描述:IC FRAMER T1/J1/E1 8CH 144-BGA RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN（6x6） 包装:* 其它名称:Q6396337A |
| IDT82V2108BBG | 功能描述:IC FRAMER T1/J1/E1 8CH 144-BGA RoHS:是 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN（6x6） 包装:* 其它名称:Q6396337A |
发布紧急采购，3分钟左右您将得到回复。