VISHAY
IL215AT/ IL216AT/ IL217AT
Document Number 83616
Rev. 1.3, 21-Oct-03
Vishay Semiconductors
www.vishay.com
1
i179083
1
2
3
4
A
K
NC
8
7
6
5
NC
B
C
E
Phototransistor Small Outline Surface Mount Optocoupler
Features
High Current Transfer Ratio
Isolation Test Voltage, 3000 VRMS
Industry Standard SOIC-8 Surface Mountable
Package
Compatible with Dual Wave, Vapor Phase and IR
Reflow Soldering
Agency Approvals
UL - File No. E52744 System Code Y
DIN EN 60747-5-5 (VDE 0884):2003-01 Available
with Option 1
Description
The IL215AT/ IL216AT/ IL217AT are optically cou-
pled pairs with a Gallium Arsenide infrared LED and a
silicon NPN phototransistor. Signal information,
including a DC level, can be transmitted by the device
while maintaining a high degree of electrical isolation
between input and output. The IL215AT/ IL216AT/
IL217AT comes in a standard SOIC-8 small outline
package for surface mounting which makes it ideally
suited for high density applications with limited space.
In addition to eliminating through hole requirements,
this package conforms to standards for surface
mounted devices.
The high CTR at low input current is designed for low
power consumption requirements such as CMOS
microprocessor interfaces.
Order Information
Available only on Tape and Reel
(Conforms to EIA Standard RS481A)
For additional order information see Option Section
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is
not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Rating for extended periods of the time can adversely affect reliability.
Input
Output
Part
Remarks
IL215AT
CTR > 20 %, SOIC-8
IL216AT
CTR > 50 %, SOIC-8
IL217AT
CTR > 100 %, SOIC-8
Parameter
Test condition
Symbol
Value
Unit
Peak reverse voltage
VR
6.0
V
Continuous forward current
IF
60
mA
Power dissipation
Pdiss
90
mW
Derate linearly from 25 °C
1.2
mW/°C
Parameter
Test condition
Symbol
Value
Unit
Collector-emitter breakdown voltage
BVCEO
30
V
Emitter-collector breakdown voltage
BVECO
7.0
V
Collector-base breakdown voltage
BVCBO
70
V