- 您现在的位置：买卖IC网 > PDF目录175852 > IP3253CZ16-8 (NXP SEMICONDUCTORS) SPECIALTY CONSUMER CIRCUIT, PDSO16 PDF资料下载
参数资料
| 型号： | IP3253CZ16-8 |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 消费家电 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PDSO16 |
| 封装： | 1.35 X 3.30 MM, 0.50 MM PITCH, ROHS COMPLIANT, PLASTIC, , SOT985-1, HXSON-8 |
| 文件页数： | 3/13页 |
| 文件大小： | 85K |
| 代理商： | IP3253CZ16-8 |
IP3253_54CZ8_CZ12_CZ16_3
NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 03 — 23 March 2010
11 of 13
NXP Semiconductors
IP3253/54CZ8/CZ12/CZ16
Integrated 4-, 6- and 8-channel passive EMI-lter network
10. Legal information
10.1
Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Denitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
10.2
Denitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
ofce. In case of any inconsistency or conict with the short data sheet, the
full data sheet shall prevail.
Product specication — The information and data provided in a Product
data sheet shall dene the specication of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
10.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost prots, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the
Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specied use without further testing or modication.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and t for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as dened in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/prole/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Non-automotive qualied products — Unless this data sheet expressly
states that this specic NXP Semiconductors product is automotive qualied,
the product is not suitable for automotive use. It is neither qualied nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualied products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
Document status[1][2]
Product status[3]
Denition
Objective [short] data sheet
Development
This document contains data from the objective specication for product development.
Preliminary [short] data sheet
Qualication
This document contains data from the preliminary specication.
Product [short] data sheet
Production
This document contains the product specication.
相关PDF资料 |
PDF描述 |
|---|---|
| IP3337CX18 | 7-channel integrated LC-filter network with ESD input protection to IEC 61000-4-2 level 4 |
| IP3338CX24 | 10-channel integrated LC-filter network with ESD input protection to IEC 61000-4-2 level 4 |
| IP3348CX10 | Integrated multi channel LC-filter network for high-speed data interfaces with ESD protection to IEC 61000-4-2 level 4 |
| IP3348CX15 | Integrated multi channel LC-filter network for high-speed data interfaces with ESD protection to IEC 61000-4-2 level 4 |
| IP3348CX20 | Integrated multi channel LC-filter network for high-speed data interfaces with ESD protection to IEC 61000-4-2 level 4 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IP3253CZ16-8,118 | 功能描述:信号调节 50Ohm LowPass 4GHz RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| IP3253CZ16-8-TTL | 制造商:NXP Semiconductors 功能描述:DIODE EMI/ESD 8 CHANNEL SOT1168 制造商:NXP Semiconductors 功能描述:DIODE, EMI/ESD, 8 CHANNEL, SOT1168 |
| IP3253CZ16-8-TTL,1 | 功能描述:信号调节 INTEGRATED 4-, 6- AND 8-CH PASSIVE EMI RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| IP3253CZ16-8-TTL,132 | 制造商:NXP Semiconductors 功能描述:- Tape and Reel 制造商:NXP Semiconductors 功能描述:Bulk 制造商:NXP Semiconductors 功能描述:0 |
| IP3253CZ8-4,118 | 功能描述:信号调节 50Ohm LowPass 4GHz RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。