- 您现在的位置：买卖IC网 > PDF目录384487 > IR2159S (International Rectifier) DIMMING BALLAST CONTROL IC PDF资料下载
参数资料
| 型号： | IR2159S |
| 厂商： | International Rectifier |
| 英文描述： | DIMMING BALLAST CONTROL IC |
| 中文描述： | 调光镇流器控制IC |
| 文件页数： | 15/25页 |
| 文件大小： | 267K |
| 代理商： | IR2159S |
IR21592/IR21593
(S)
www.irf.com
15
-90.0
-85.0
-80.0
-75.0
-70.0
-65.0
-60.0
0
5
10
15
20
25
30
Lamp Power [Watts]
P
Figure 4, Lamp power vs. phase of output stage.
Under-voltage Lock-Out (UVLO)
The IR21592/IR21593 undervoltage lock-out is
designed to maintain an ultra low quiescent
current of less than 200uA, while guaranteeing
the IC is fully functional before the high and low
side output drivers are activated. Figure 5 shows
an efficient supply voltage using the start-up
current of the IR21592/IR21593 together with a
charge pump from the ballast output stage (R1,
C1, C2, D1 and D2).
16
15
14
13
12
11
LO
COM
VCC
VB
VS
HO
Rectified
AC Line
Half-Bridge
Output
C1
R1
D1
D2
Q2
Q1
RVDC
C2
V
BUS
(+)
D3
C3
RCS
V
BUS
(-)
1
VDC
R3
CVDC
DISCHARGE
TIME
INTERNAL
CLAMP VOLTAGE
VHYST
V
UVLO+
V
UVLO-
CHARGE PUMP
OUTPUT
t
V
C1
R1 & C1 TIME
CONSTANT
C1
DISCHARGE
Figure 6, Start-up capacitor (C1) voltage.
During the discharge cycle, the rectified current
from the charge pump charges the capacitor above
the minimum operating voltage of the device and
the charge pump and internal 15.6V zener clamp
of the IC take over as the supply voltage. The
start-up capacitor and snubber capacitor must be
selected such that worst case IC conditions are
satisfied. A bootstrap diode (D3) and supply
capacitor (C3) comprise the supply voltage for
the high side driver circuitry. To guarantee that
the high-side supply is charged up before the first
pulse on pin HO, the first pulse from the output
drivers comes from the LO pin. During UVLO,
the high and low side driver outputs are low, pin
VCO is pulled-up internally to 5V resetting the
starting frequency to the maximum, and pin CPH
is short-circuited internally to COM resetting the
preheat time.
Figure 5, Typical application of start-up circuitry.
The start-up capacitor (C1) is charged by current
through resistor (R1) minus the start-up current
drawn by the IC. This resistor is typically chosen
to provide 2X the maximum start-up current at
low line to guarantee start-up under the worst case
condition. Once the capacitor voltage reaches the
start-up threshold, and, the voltage on pin VDC is
above 5.1V (see Brown-out Protection), the IC
turns on and HO and LO begin to oscillate. The
capacitor begins to discharge due to the increase
in IC operating current (Figure 6).
相关PDF资料 |
PDF描述 |
|---|---|
| IR2171 | LINEAR CURRENT SENSING IC |
| IR2175 | LINEAR CURRENT SENSING IC |
| IR2175S | LINEAR CURRENT SENSING IC |
| IR2175SPBF | LINEAR CURRENT SENSING IC |
| IR2308 | CABLE 40 COND 100FT TWISTED PAIR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IR2159STR | 功能描述:IC BALLAST CONTROL DIM 16-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 照明，镇流器控制器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:CCFL 控制器 频率:40 ~ 80 kHz 电流 - 电源:5mA 电流 - 输出:- 电源电压:4.5 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) 其它名称:90-3991V+V01 |
| IR2161 | 制造商:International Rectifier 功能描述: |
| IR2161PBF | 功能描述:功率驱动器IC Halogen Cnvrtr Cntrl IC RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| IR2161S | 制造商:International Rectifier 功能描述: |
| IR2161SPBF | 功能描述:功率驱动器IC HALOGEN CONVERTER CTRLR 500mA 1W RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。