参数资料
| 型号： | IRPLDIM2E |
| 厂商： | International Rectifier |
| 文件页数： | 7/14页 |
| 文件大小： | 0K |
| 描述： | KIT BALLAST DIM DIG 230VAC |
| 标准包装： | 1 |
| 其它名称： | *IRPLDIM2E |
IRPLDIM2E
Upon entry into the program after setup the microcontroller is held in a loop. While in this loop the microcontroller
is checking for errors, plus it is polling the communications circuitry for incoming data. If valid data is received, it
is filtered to determine if the address matches the defined address for the ballast, if the group matches the defined
group memberships, or if the data is a broadcast command. Also, the type of command is filtered into two basic
choices, standard or special. Once filtered, the program immediately vectors to the appropriate command and
executes. All of the commands are divided into four general categories including arc power control commands,
configuration commands, query commands, and special commands. Within each category the commands are
divided again according to related functions.
The arc power control commands are the most
commonly used in a functioning lighting system.
Within any of these commands appropriate sig-
nals are sent to the ballast controller to adjust
light level via pulse width modulation. This in-
cludes scene level selections. Also many of the
commands in this group select the shutdown bit,
depending on the definition of the command.
Configuration commands are used to setup the
ballast. Examples of such settings include set-
ting minimum and maximum lighting thresholds,
fade times and rates, groups, and scene levels.
Generally data is stored in an EEPROM storage
area where it is maintained regardless of the
power conditions.
Query commands are used to get feedback from
the ballast. All of the settings can be queried.
Even more useful, the status of the ballast is avail-
able. Information about fading, the lamp, general
faults, and power is available through the appro-
priate query command.
Special commands are unique. These com-
mands are immune to addresses; thus all bal-
lasts on the
Digitally Addressable Lighting Interface respond
to a special command. All the functions for find-
ing new ballasts or ballasts that have no ad-
dresses are available. Uploading information to
the ballast, typically settings, is also available in
the special command set.
Fig. 6 Program Flow
www.irf.com
7
相关PDF资料 |
PDF描述 |
|---|---|
| IRPLDIM2U | BALLAST DIM DIG 32W/T8 120VAC |
| IRPLDIM3 | KIT DES FLUOR BALLAST IRS2158D |
| IRPLDIM4E | KIT DES BALLAST 26W IRS2530D |
| IRPLDIM5E | KIT DES BALLAST 4LEVEL DIM FLUOR |
| IRPLHALO1E | KIT HALOGIN CONVERTER 100VA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IRPLDIM2U | 功能描述:BALLAST DIM DIG 32W/T8 120VAC RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板 |
| IRPLDIM3 | 功能描述:电源管理IC开发工具 3 lvl Dim CFL Fluor Ballast w/IRS2158D RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLDIM4E | 功能描述:电源管理IC开发工具 Miniature Dimmable 26W Ballast dsgn kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLDIM5E | 功能描述:电源管理IC开发工具 4lvl Swtch Dim Fluor Ballast dsgn Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLHALO1E | 功能描述:电源管理IC开发工具 Halogen Cnvrtr 220/230VAC RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
发布紧急采购，3分钟左右您将得到回复。