参数资料
型号: IRPT5051
文件页数: 3/12页
文件大小: 433K
代理商: IRPT5051
IRPT5051
page 3
gate, deactivating the gate drive circuits and shutting off the in-
verter.
The
relay control circuit
delivers an on/off signal via an
opto-isolator to the relay driver which controls the relay (K1).
The relay contact is open during power-up, inserting the resistor
R in series with the DC bus capacitor and limiting the capacitor
charging current. In normal operation, the relay contact is closed.
If the AC line voltage falls below 300V or if one input phase is
lost, or if the DC line voltage falls to less than 82% of the peak
line voltage, the relay contact opens.
The
UV circuit
senses the voltage of the local power supply,
and sends a signal via an opto-isolator to the latch in the event of
undervoltage. The UV circuit normally activates the latch only
during power-up and power-down, preventing the IGBTs from
Figure 3
. IRPT5051D Driver-
Plus
Board
being turned on when the local power supply voltage is too low
for proper IGBT switching.
The
current signal processing circuit
receives inputs from
current transformers connected in series with the input lines and
the DC bus capacitor. The output of the current signal processing
circuit, IFB, is essentially an isolated replica of the inverter input
current. An isolated current feedback signal, I
FB
, is provided as
an output of the IRPT5051A. If the inverter current exceeds the
trip level of 65A, I
FB
also activates the latch.
The
thermistor
activates the latch if the temperature of the
IMS substrate exceeds a set level. The 15V isolated power supply
used to power the IRPT5051 should be the same as the one for
the PWM gnereation, otherwise the protection functions will be
disabled.
相关PDF资料
PDF描述
IRPT5051A
IRPT5051 Integrated Power Stage for 11kW Motor Drives(11kW 马达驱动器的集成功率单元)
IRSF3010S TRANSISTOR | MOSFET | N-CHANNEL | 50V V(BR)DSS | 11A I(D) | TO-263AA
IRSF3011F TRANSISTOR | MOSFET | N-CHANNEL | 50V V(BR)DSS | 5A I(D) | TO-220VAR
IRSF3011L TRANSISTOR | MOSFET | N-CHANNEL | 50V V(BR)DSS | SOT-223
相关代理商/技术参数
参数描述
IRPT5051A 制造商:未知厂家 制造商全称:未知厂家 功能描述:
IRPT5051C 制造商:IRF 制造商全称:International Rectifier 功能描述:Integrated Power Stage for 15 hp Motor Drives
IRPT5051D 制造商:IRF 制造商全称:International Rectifier 功能描述:Integrated Power Stage for 15 hp Motor Drives
IRPT5051E 制造商:IRF 制造商全称:International Rectifier 功能描述:Integrated Power Stage for 15 hp Motor Drives
IRQ-12/8.3-T110N-C 功能描述:DC DC CONVERTER 12V 100W 制造商:murata power solutions inc. 系列:IRQ 包装:托盘 零件状态:在售 类型:隔离模块 输出数:1 电压 - 输入(最小值):57.6V 电压 - 输入(最大值):160V 电压 - 输出 1:12V 电压 - 输出 2:- 电压 - 输出 3:- 电流 - 输出(最大值):8.3A 功率(W):100W 电压 - 隔离:3kV 应用:ITE(商业),铁路 特性:远程开/关,OCP,OTP,OVP,SCP,UVLO 工作温度:-40°C ~ 85°C 效率:87.4% 安装类型:通孔 封装/外壳:四分之一砖 大小/尺寸:2.28" 长 x 1.45" 宽 x 0.50" 高(57.9mm x 36.8mm x 12.7mm) 供应商器件封装:- 控制特性:使能,低电平有效 标准包装:30