参数资料
型号: IS-CL04R
厂商: NKK Switches
文件页数: 19/35页
文件大小: 0K
描述: CONTROLLER FOR OLED ROCKER
产品培训模块: Smart Switch Overview
视频文件: Rock N Scroll
RoHS指令信息: AT, IS Series, Cert of Compliance
标准包装: 1
附件类型: 控制器
适用于相关产品: OLED SmartSwitch? 摇臂
产品目录页面: 2526 (CN2011-ZH PDF)
配用: 360-2419-ND - DESIGN KIT FOR OLED ROCKER
360-2367-ND - SWITCH ROCKER MONOCHROME OLED
其它名称: 360-2422
IS-Dev Kit-8 User’s Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Command to turn the switch display off
This command turns off the OLED display.
command format:
26H
51H 69H
transmit format: (xxH) (xxH) (xxH)
Command to turn the switch display on
This command turns on the OLED display.
command format:
26H
51H 66H
transmit format: (xxH) (xxH) (xxH)
Command to turn the OLED voltage off
This command turns off the 16V supply to the OLED display.
command format:
26H
51H 74H
transmit format: (xxH) (xxH) (xxH)
Command to turn the OLED voltage on
This command turns on the 16V supply to the OLED display.
command format:
26H
51H 75H
transmit format: (xxH) (xxH) (xxH)
Note: This command should only be used when the OLED displays are in the off mode.
Commands that disable switch and timer execution
Upon transmitting any of the following commands, the timer stops running and attributes for the switches
activity do not execute. The switches are still scanned and reported. The attributes execution is enabled upon
reboot/power up or by command from host.
The reason for disabling attribute execution is for faster download of images and attribute as well as command
to check the image at any address.
Command to download setup data
The command downloads the flags and other setup values. This information are stored on the MicroSD flash.
command format:
transmit format:
2AH
(xxH)
[00H]
(xxAH)
[00H]
(xxAH)
[55H]
(xxAH)
[flag]
(xxAH)
[0001H]
(xxAH)
[0001H]
(xxAH)
[reserved]
(xxAH)
[flag] is one byte sent in ASCII HEX format. (Detail below)
[reserved] is two bytes sent in ASCII HEX format. These bytes should be 00H. This is for future use. Customer
could use the last byte for storing the data version.
All other byte must be transmitted with the stated values.
IS-Dev Kit 8 Users Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 19 of 35
1013
相关PDF资料
PDF描述
BLA2ABD601SN4D FERRITE ARRAY 600 OHM 0804 SMD
A01FG2 SWITCH GUARD SQUARE AND ROUND
PVG3A102C01R00 TRIMMER 1K OHM 0.25W SMD
ECP-U1E334KB5 CAP FILM 0.33UF 25VDC 1206
A01FG1 SWITCH GUARD RECTANGULAR
相关代理商/技术参数
参数描述
IS-C-M 制造商:Labfacility Limited 功能描述:PLUG STANDARD T/C TYPE CU
ISCPLSI103260LJI 制造商:LAT 功能描述:*
ISD0103D05 功能描述:DC DC CONVERTER +/-5V 1W 制造商:xp power 系列:ISD01 零件状态:在售 类型:隔离模块 输出数:2 电压 - 输入(最小值):2.97V 电压 - 输入(最大值):3.63V 电压 - 输出 1:5V 电压 - 输出 2:-5V 电压 - 输出 3:- 电压 - 输出 4:- 电流 - 输出(最大值):100mA,100mA 功率(W):1W 电压 - 隔离:4.2kV 应用:ITE(商业) 特性:- 工作温度:-40°C ~ 105°C(有降额) 效率:78% 安装类型:表面贴装 封装/外壳:10-SMD 模块,6 引线 大小/尺寸:0.60" 长 x 0.44" 宽 x 0.26" 高(15.2mm x 11.0mm x 6.6mm) 供应商器件封装:- 标准包装:30
ISD0103D3V3 功能描述:DC DC CONVERTER +/-3.3V 1W 制造商:xp power 系列:ISD01 零件状态:在售 类型:隔离模块 输出数:2 电压 - 输入(最小值):2.97V 电压 - 输入(最大值):3.63V 电压 - 输出 1:3.3V 电压 - 输出 2:-3.3V 电压 - 输出 3:- 电压 - 输出 4:- 电流 - 输出(最大值):151mA,151mA 功率(W):1W 电压 - 隔离:4.2kV 应用:ITE(商业) 特性:- 工作温度:-40°C ~ 105°C(有降额) 效率:75% 安装类型:表面贴装 封装/外壳:10-SMD 模块,6 引线 大小/尺寸:0.60" 长 x 0.44" 宽 x 0.26" 高(15.2mm x 11.0mm x 6.6mm) 供应商器件封装:- 标准包装:30
ISD0103S05 功能描述:DC DC CONVERTER 5V 1W 制造商:xp power 系列:ISD01 零件状态:在售 类型:隔离模块 输出数:1 电压 - 输入(最小值):2.97V 电压 - 输入(最大值):3.63V 电压 - 输出 1:5V 电压 - 输出 2:- 电压 - 输出 3:- 电压 - 输出 4:- 电流 - 输出(最大值):200mA 功率(W):1W 电压 - 隔离:4.2kV 应用:ITE(商业) 特性:- 工作温度:-40°C ~ 105°C(有降额) 效率:75% 安装类型:表面贴装 封装/外壳:8-SMD 模块,5 引线 大小/尺寸:0.50" 长 x 0.44" 宽 x 0.26" 高(12.7mm x 11.0mm x 6.6mm) 供应商器件封装:- 标准包装:40