参数资料
| 型号： | IS-DEV KIT-1 |
| 厂商： | NKK Switches |
| 文件页数： | 7/15页 |
| 文件大小： | 0K |
| 描述： | SMARTSWITCH DEVELOPMENT KIT 1 |
| 产品培训模块： | Smart Switch Overview |
| 视频文件： | OLED Pushbutton in Action |
| RoHS指令信息： | AT, IS Series, Cert of Compliance |
| 标准包装： | 1 |
| 系列： | SmartSwitch™ |
| 主要目的： | 带可编程显示器的开关 |
| 已用 IC / 零件： | SmartSwitch?LCD 显示器 |
| 主要属性： | LCD 显示器模块，2 个触摸开关，带闪存 |
| 次要属性： | 最多 255 张图片和属性 |
| 已供物品： | 模块 |
| 产品目录页面： | 2526 (CN2011-ZH PDF) |
| 配用： | 360-2431-ND - SERIAL CBL RJ11-DB9 FOR DEV KIT 360-2430-ND - POWER SUPPLY 240VAC FOR DEV KIT 360-2429-ND - POWER SUPPLY 120VAC FOR DEV KIT |
| 相关产品： | IS01BCEF-ND - SMARTDISPLAY SUPER YEL/GRN LED IS01BCE-ND - SMARTDISPLAY SUPER YELLOW LED 360-2333-ND - SMARTDISPLAY SUPER RED/GREEN LED |
| 其它名称： | 360-2325 |
IS-Dev Kit-1 Users Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
B0=0 ==> Turn the LED of switch #1 off during on cycle
B0=1 ==> Turn the LED of switch #1 on during on cycle
NOTE: Switch #1 and Switch#2 refer to JB series switches.
3. Overview
The IS-Dev Kit-1 has a flash EEPROM that can hold up to 255 images and attributes. The EEPROM is
rated for 100,000 write cycle.
These images and Attributes can be downloaded to the IS-Dev Kit-1 via RS232 communication.
The IS-Dev Kit-1 has internal RAM to hold the data for an image and attributes. These data are used to
refresh the LCD display and backlighting.
Upon switch presses, timer expire or command from host the data can be read from any location of
EEPROM to internal RAM.
Host also can change the data on the internal RAM directly.
The switch activity and timer expires are reported via RS232.
Power-Up (Steps 1,2,3)
Upon power-up or reset, controller performs the following steps:
Step 1: Check if the RAM has been programmed. Compare the check string to EEPROM string.
A. If the strings are not the same, the EEPRM is virgin and its data is not acceptable. Step 2 will be
executed. (first time)
B. If the strings are the same, the data from RAM is acceptable. Step 2 is omitted and Step 3 is
executed.
Step 2: Write all the default initialize values to EEPROM as follows:
A. Put “D ULED” as the Image for location one.
B. Put "Blank Font Memory" as the picture for location 2.
C. Put LED backlighting code on for location 1, 2.
D. Put “00H 00H 02H 0FH 10H 10H” as attribute for location #1.
E. Put “00H 00H 00H 00H 00H 00H” as attribute for location #2.
F. Write the virgin check string.
Step 3
A.
B.
Initialize and load the data from location 1 of EEPROM to internal RAM.
Initialize UART.
IS-Dev Kit-1 Users Manual A.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 7 of 15
0110
相关PDF资料 |
PDF描述 |
|---|---|
| IS-DEV KIT-2 | SMARTSWITCH DEVELOPMENT KIT 2 |
| IS-DEV KIT-6C | KIT DEV LCD 64X32 COMPACT SWITCH |
| IS-DEV KIT-7 | KIT DEV FOR OLED SWITCH |
| IS-DEV KIT-8 | SMARTSWITCH DEVELOPMENT KIT 8 |
| IS-P410905 | POWER SUPPLY 120VAC FOR DEV KIT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IS-DEVKIT-4 | 制造商:NKK Switches 功能描述:Development Kit w/ Two RGB Smartswitch LCD Programmable Pushbutton Switches |
| IS-DEVKIT-5 | 制造商:NKK Switches 功能描述:Two 36 x 24 RGB Switches on PC Board w/ Fash Memory Power and Programming |
| ISDF-02-D-M | 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-02-D-R | 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-02-S | 制造商:Samtec Inc 功能描述:.050[1.27] DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
发布紧急采购，3分钟左右您将得到回复。