参数资料
型号: IS-DEV KIT-5
厂商: NKK Switches
文件页数: 7/24页
文件大小: 0K
描述: SMARTSWITCH DEVELOPMENT KIT 5
产品培训模块: Smart Switch Overview
视频文件: OLED Pushbutton in Action
RoHS指令信息: AT, IS Series, Cert of Compliance
标准包装: 1
系列: SmartSwitch™
主要目的: 带可编程显示器的开关
已用 IC / 零件: IS15ABFP4RGB
主要属性: 2 个 LCD 开关,带闪存的 PC 板
次要属性: 电源和编程连接
已供物品: 模块
产品目录页面: 2526 (CN2011-ZH PDF)
配用: 360-2431-ND - SERIAL CBL RJ11-DB9 FOR DEV KIT
360-2430-ND - POWER SUPPLY 240VAC FOR DEV KIT
360-2429-ND - POWER SUPPLY 120VAC FOR DEV KIT
相关产品: 360-2332-ND - SMARTSWITCH STANDARD RED/GRN/BLU
其它名称: 360-2328
IS-Dev Kit-5 and IS-Dev Kit-6 Users
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
5. Operational Details
Power-Up Sequence (Steps 1,2,3)
Upon power-up or reset, controller performs the following steps:
Step 1: Check the status of Mode Select Switch for mode of operation. Initialize according to selected mode.
Step 2: Check if the flash RAM has been programmed. Compare the check string to flash RAM string.
A. If the strings are not the same, the flash RAM is virgin and its data is not acceptable. Step 3 will be
executed. (first time)
B. If the strings are the same, the data from RAM is acceptable. Step 3 is omitted and Step 4 is
executed.
Step 3: Write all the default initialize values to the flash memory as follows:
A. Put “BLANK FONT MEMORY” as the picture for location one.
B. Put “BLANK FONT MEMORY” as the picture for location two.
C. Put ONcycle LED’s ON for location #1 and #2.
D. Put OFFcycle LED’s off for location #1 and #2.
E. Put “00H 00H 00H 00H 00H 00H” as attribute for location #1 and #2.
F. Put 00H for software version
G. Write the default setup values such OFFcycle, ON/OFF ratio…
H. Write the virgin check string.
Step 4: LED brightness adjustment as follows:
A. Display “DOWN LED” and “UP LED” on the two switches and allow for adjustments of the
brightness. There are 8 brightness levels (0 to 7). When the internal timer is expired, the controller
proceeds to Step 5. Every time a switch is pressed, the timer gets reset. If a switch is held
depressed the timer does not run. Switch activity are not reported to host.
B. When the timer expires transmit 83H
C. Initialize and load the data from location 1 and 2 of EEPROM to internal RAM for switch 1 and 2
respectfully.
Main Operational Mode
Step 5:
A. If the switch one is pressed: Transmit 81H to host and execute the attribute.
(For details see Attribute Execution )
B. If the switch two is pressed: Transmit 82H to host and execute the attribute.
(For details see Attribute Execution )
C. If the timer for switch 1 is expired: Transmit 83H to host and execute the timer attribute.
(For details see Attribute Execution )
D. If the timer for switch 2 is expired: Transmit 84H to host and execute the timer attribute.
(For details see Attribute Execution )
E. If the switch one is released: Transmit B1H to host.
IS-Dev Kit-5 and IS-Dev Kit-6 Users Manual A.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 7 of 24
1209
相关PDF资料
PDF描述
EEC18DRES-S93 CONN EDGECARD 36POS .100 EYELET
EVAL-AD1940MINIBZ BOARD EVAL AD1940 MINI SIGMADSP
ADN8830ACPZ IC CTRLR THERMO COOLER 32-LFCSP
MAX674CSA+T IC VREF SERIES PREC 10V 8-SOIC
RSC06DRXN-S734 CONN EDGECARD 12POS DIP .100 SLD
相关代理商/技术参数
参数描述
IS-DEVKIT-5 制造商:NKK Switches 功能描述:Two 36 x 24 RGB Switches on PC Board w/ Fash Memory Power and Programming
ISDF-02-D-M 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-D-R 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S 制造商:Samtec Inc 功能描述:.050[1.27] DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S-M 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk