参数资料
| 型号： | IS-DEV KIT-6C |
| 厂商： | NKK Switches |
| 文件页数： | 7/24页 |
| 文件大小： | 0K |
| 描述： | KIT DEV LCD 64X32 COMPACT SWITCH |
| 产品培训模块： | Smart Switch Overview |
| 视频文件： | OLED Pushbutton in Action |
| RoHS指令信息： | AT, IS Series, Cert of Compliance |
| 产品目录绘图： | IS-DEV KIT Series |
| 标准包装： | 1 |
| 系列： | SmartSwitch™ |
| 主要目的： | 带可编程显示器的开关 |
| 已用 IC / 零件： | IS15DSBFP4RGB |
| 主要属性： | 2 个紧凑型开关，带闪存的 PC 板 |
| 次要属性： | 电源和编程连接 |
| 已供物品： | 模块 |
| 产品目录页面： | 2526 (CN2011-ZH PDF) |
| 配用： | 360-2431-ND - SERIAL CBL RJ11-DB9 FOR DEV KIT 360-2430-ND - POWER SUPPLY 240VAC FOR DEV KIT 360-2429-ND - POWER SUPPLY 120VAC FOR DEV KIT |
| 相关产品： | 360-2345-ND - SWITCH COMPACT LCD 64X32 RGB |
| 其它名称： | 360-2337 |
IS-Dev Kit-5 and IS-Dev Kit-6 Users
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
5. Operational Details
Power-Up Sequence (Steps 1,2,3)
Upon power-up or reset, controller performs the following steps:
Step 1: Check the status of Mode Select Switch for mode of operation. Initialize according to selected mode.
Step 2: Check if the flash RAM has been programmed. Compare the check string to flash RAM string.
A. If the strings are not the same, the flash RAM is virgin and its data is not acceptable. Step 3 will be
executed. (first time)
B. If the strings are the same, the data from RAM is acceptable. Step 3 is omitted and Step 4 is
executed.
Step 3: Write all the default initialize values to the flash memory as follows:
A. Put “BLANK FONT MEMORY” as the picture for location one.
B. Put “BLANK FONT MEMORY” as the picture for location two.
C. Put ONcycle LED’s ON for location #1 and #2.
D. Put OFFcycle LED’s off for location #1 and #2.
E. Put “00H 00H 00H 00H 00H 00H” as attribute for location #1 and #2.
F. Put 00H for software version
G. Write the default setup values such OFFcycle, ON/OFF ratio…
H. Write the virgin check string.
Step 4: LED brightness adjustment as follows:
A. Display “DOWN LED” and “UP LED” on the two switches and allow for adjustments of the
brightness. There are 8 brightness levels (0 to 7). When the internal timer is expired, the controller
proceeds to Step 5. Every time a switch is pressed, the timer gets reset. If a switch is held
depressed the timer does not run. Switch activity are not reported to host.
B. When the timer expires transmit 83H
C. Initialize and load the data from location 1 and 2 of EEPROM to internal RAM for switch 1 and 2
respectfully.
Main Operational Mode
Step 5:
A. If the switch one is pressed: Transmit 81H to host and execute the attribute.
(For details see Attribute Execution )
B. If the switch two is pressed: Transmit 82H to host and execute the attribute.
(For details see Attribute Execution )
C. If the timer for switch 1 is expired: Transmit 83H to host and execute the timer attribute.
(For details see Attribute Execution )
D. If the timer for switch 2 is expired: Transmit 84H to host and execute the timer attribute.
(For details see Attribute Execution )
E. If the switch one is released: Transmit B1H to host.
IS-Dev Kit-5 and IS-Dev Kit-6 Users Manual A.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 7 of 24
1209
相关PDF资料 |
PDF描述 |
|---|---|
| IS-DEV KIT-7 | KIT DEV FOR OLED SWITCH |
| IS-DEV KIT-8 | SMARTSWITCH DEVELOPMENT KIT 8 |
| IS-P410905 | POWER SUPPLY 120VAC FOR DEV KIT |
| IS-SERIAL-CABLE | SERIAL CBL RJ11-DB9 FOR DEV KIT |
| IS18WWC1W-K | DESIGN KIT FOR OLED ROCKER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISDF-02-D-M | 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-02-D-R | 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-02-S | 制造商:Samtec Inc 功能描述:.050[1.27] DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-02-S-M | 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk |
| ISDF-03-D | 制造商:Samtec Inc 功能描述:CONN HOUSING PL 6 POS 1.27MM ST - Bulk |
发布紧急采购，3分钟左右您将得到回复。