参数资料
型号: IS-DEV KIT-7
厂商: NKK Switches
文件页数: 24/42页
文件大小: 0K
描述: KIT DEV FOR OLED SWITCH
产品培训模块: Smart Switch Overview
视频文件: OLED Pushbutton in Action
RoHS指令信息: AT, IS Series, Cert of Compliance
产品目录绘图: IS-DEV KIT Series
特色产品: OLED SmartSwitch? & SmartDisplay?
标准包装: 1
系列: SmartSwitch™
主要目的: 带可编程显示器的开关
嵌入式: 是,ASIC
已用 IC / 零件: ISC15ANP4
主要属性: 2 OLED 开关,带闪存的 PC 板
次要属性: 电源和编程连接
已供物品: 板,IC 样品
产品目录页面: 2526 (CN2011-ZH PDF)
配用: 360-2431-ND - SERIAL CBL RJ11-DB9 FOR DEV KIT
360-2430-ND - POWER SUPPLY 240VAC FOR DEV KIT
360-2429-ND - POWER SUPPLY 120VAC FOR DEV KIT
相关产品: 360-2344-ND - SWITCH OLED 64RGB X 48
其它名称: 360-2339
IS-Dev Kit-7 User’s Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Commands that disable switch and timer execution
Upon transmitting any of the following commands, the timers stop running and attributes for the switches
activity do not execute. The switches are still scanned and reported. The attributes execution is enabled upon
reboot/power up or by command from host.
The reason for disabling attribute execution is for faster download of images and attribute as well as command
to check the image at any address.
Command to download setup data
This command downloads the set-up data. These set up are saved on microSD
command format:
transmit format:
2AH
(xxH)
[00H]
(xxAH)
[00H]
(xxAH)
[55H]
(xxAH)
[flag]
(xxAH)
[address1]
(xxAH)
[address2 ]
(xxAH)
[reserved]
(xxAH)
[flag] is one byte sent in ASCII HEX format. (Detail below)
[address 1] is two bytes with value of 0001H to FFFFH sent in ASCII HEX format. This is the address for the
image that switch 1 displays upon power up/reboot.
[address 2] is two bytes with value of 0001H to FFFFH sent in ASCII HEX format. This is the address for the
image that switch 2 displays upon power up/reboot.
[reserved] is two bytes sent in ASCII HEX format. This is for future use. Customer could use the last byte for
storing the data version.
This set up data can be read using the attribute upload command.
The controller disables the timers and switch execution upon receiving this command. However, the switches
are still scanned and reported. They are enabled upon reboot/power up or by command from host.
Flag Byte Default value=80H
Bit Enable
Value
B0 0 Buzzer
B1 0 61H flag
B2 0 79H flag
Flag
Controller action when flag is set
Beeper sound for switch press
61H is transmitted in response to command.
79H is transmitted upon completion of
command.
B3
B4
0
0
Switch release report flag
6EH flag
Switch release are reported
6CH/6EH is transmitted if there is any error
during communication to host.
B5
B6
B7
0
0
0
Timers expire report flag
Switch press report flag
Address change report flag
Timers expiration are reported
Switch presses are reported
Newest address is reported for each switch
Example: 2A30303030 3535 3830 30303031 30303146 30303030 sets all the flags on, points left switch to
address 0001H and right switch to address 001FH. The flag takes affect when the controller is reset.
IS-Dev Kit-7 Users Manual B.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 24 of 42
1013
相关PDF资料
PDF描述
IS-DEV KIT-8 SMARTSWITCH DEVELOPMENT KIT 8
IS-P410905 POWER SUPPLY 120VAC FOR DEV KIT
IS-SERIAL-CABLE SERIAL CBL RJ11-DB9 FOR DEV KIT
IS18WWC1W-K DESIGN KIT FOR OLED ROCKER
ISL1208EVAL EVALUATION BOARD FOR ISL1208
相关代理商/技术参数
参数描述
ISDF-02-D-M 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-D-R 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S 制造商:Samtec Inc 功能描述:.050[1.27] DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S-M 制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-03-D 制造商:Samtec Inc 功能描述:CONN HOUSING PL 6 POS 1.27MM ST - Bulk